Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit
Pressure Source Quick Connection Microfluidic Kit

Pressure Source Quick Connection Microfluidic Kit

Available: In Stock
A tools set to connect to a pressure network
€165.00
A tools set to connect to a pressure network

Connecting a microfluidics compressor or microfluidic vacuum station or air line to your setup.

  • All-in-one toolset 
  • Sturdy elements 
  • Infinitely reusable 
  • Installable in a minute

Pressure Source Quick Connection Microfluidic Kit 6mm Pneumatic Tube (2m) Adaptor,G1/4 x6mm (x1) Adaptor,G1/4 x8mm (x1) Adaptor,G1/4 x10mm (x1) Brass female sleeve,1/4 in (x1) 7mm barbed adapter for rubber hose (x1) 10mm barbed adapter for rubber hose (x1) Steel Hose Clamp 13 to 16mm (x1) Steel Hose Clamp 14 to 22mm (x1) all

 
The following elements are provided to permit you to easily connect your Pressure & Flow Controller to any pressure source:

 

  • 6mm Pneumatic Tube (2m)
  • Adaptor,G1/4 x6mm (x1)
  • Adaptor,G1/4 x8mm (x1)
  • Adaptor,G1/4 x10mm (x1)
  • Brass female sleeve,1/4 in (x1)
  • 7mm barbed adapter for rubber hose (x1)
  • 10mm barbed adapter for rubber hose (x1)
  • Steel Hose Clamp 13 to 16mm (x1)
  • Steel Hose Clamp 14 to 22mm (x1)

The following elements are provided in order to facilitate multiple pressure unit extensions and open/close your air flow:

 

  • Pneumatic Tee Tube-to-Tube Adapter, Push In 6 mm (x1)
  • Pneumatic Cross Tube-to-Tube Adapter Push In 6 mm (x1)
  • Flow Regulator G1/4 X 6mm (x1)

 


Pressure source quick connection microfluidic kit

Payment Terms

You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!

Credit card 

  • Add your products to the cart
  • In the cart page, click on Proceed to Checkout
  • Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
  • That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.

Invoice

  • Add your products to the cart
  • In the website header, click on Request a Quote
  • Fill in the required informations, then click on Submit Quote
  • Our team will send you a quote shortly
  • After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
  • Our team will complete your purchase and send you the invoice!

A 25€ bank fee will be applied for any wire transfer in other currencies than Euros (€) outside the SEPA zone (European Union, Iceland, Norway, Liechtenstein, Switzerland, Monaco).

 

Shipping

The shipping charges are calculated based on the weight of the package and on the country of destination. We try to offer you the best shipping rates and services, shipping all our orders through UPS. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination!

Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!