Reglo Quick High-Flow Peristaltic Pump

Reglo Quick High-Flow Peristaltic Pump

Available: In Stock
The Reglo Quick pump from Ismatec is an easy-to-use and reliable peristaltic pump for your research, offering the Ismatec quality at an affordable price. Covering a wide flow range (2.1 - 230 mL/min), this one-channel pump is recommended for applications where a higher flow rate is needed (e.g. dynamic cell perfusion).
Reglo Quick cannot be programmed: the "Start/Stop", "Speed" and "Direction" controls are on the pump.
€1,838.66
The Reglo Quick pump from Ismatec is an easy-to-use and reliable peristaltic pump for your research, offering the Ismatec quality at an affordable price. Covering a wide flow range (2.1 - 230 mL/min), this one-channel pump is recommended for applications where a higher flow rate is needed (e.g. dynamic cell perfusion).
Reglo Quick cannot be programmed: the "Start/Stop", "Speed" and "Direction" controls are on the pump.

Ismatec, established in 1964, is now a leading reference in peristaltic pumps thanks to its offer of high-precision pumps.

The Reglo Quick peristaltic pump provides a consistent flow over a wide range (2.1 to 230 mL/min). Using robust materials and latest technologies, this Reglo pump has the following features:

  • Compact and single-channel: for dosing or filling applications with a reduced footprint
  • Four-roller head achieves flow rates up to 230 mL/min
  • Microprocessor-controlled pump for high-accuracy dispensing
  • Consistent flow and reduced tubing wear for improved results
  • Easily accessible tube-bed: no need to use 2-stop or 3-stop tubing, tubing replacement is easy
  • No maintenance: rollers are self-lubricating

Wide opening angle makes the tube bed easily accessible for a quick tubing change. Only use with Tygon® LFL, Tygon Lab/LMT-55, Tygon HC, PharMed® BPT, peroxide-cured silicone, and Santoprene® tubing.

 

Characteristics

 

Dimensions 178 x 100 x 143 mm (pump head closed)
    Weight 2.2 kg
       Flow rates
      • 2.1 - 103 mL/min (Tubing ID: 3.2 mm / 1/8" - Wall thickness: 1.6 mm / 1/16")
      • 4.6 - 230 mL/min (Tubing ID: 4.8 mm / 3/16" - Wall thickness: 1.6 mm / 1/16")
      Number of channels 1
      Number of rollers 4
      Motor type DC motor
      Rotor speed 3.2 to 160 rpm
      Speed setting 2-digit potentiometer, 1% steps
      Speed control Closed loop control for pressure independent speed
      Remote control Analog interface (no RS232)
        Analog input Speed control (0 - 5 or 0 - 10V / 0 - 20 or 4 - 20mA)
        Analog output Speed monitoring (0 - 8 kHz)
        Digital input (TTL level) Start/Stop, rotation direction
        Operating panel Only "Start/Stop", "Speed" and "Direction"
        Tubing type Tygon® LFL, Tygon Lab/LMT-55, Tygon HC, PharMed® BPT, peroxide-cured silicone, and Santoprene®. No 2-stop or 3-stop tubing needed.
        Tubing size
        • 3.2 and 4.8 mm (1/8" and 3/16") inner diameter
        • 1.6 mm (1/16") wall thickness
        Tube bed
        • easily accessible tube-bed with wide opening angle
        • transparent protection cover
        • rapid tube change-over
        Differential pressure 1.5 bar (21.7 psi) possible (depending on tubing material); 
        small tubing diameters may allow higher pressures
        Protection rating IP 30
        Power supply 115 - 230 VAC / 50 - 60 Hz
        Power consumption 30 W

        Payment Terms

        You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!

        Credit card 

        • Add your products to the cart
        • In the cart page, click on Proceed to Checkout
        • Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
        • That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.

        Invoice

        • Add your products to the cart
        • In the website header, click on Request a Quote
        • Fill in the required informations, then click on Submit Quote
        • Our team will send you a quote shortly
        • After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
        • Our team will complete your purchase and send you the invoice!

        A 25€ bank fee will be applied for any wire transfer in other currencies than Euros (€) outside the SEPA zone (European Union, Iceland, Norway, Liechtenstein, Switzerland, Monaco).

         

        Shipping

        The shipping charges are calculated based on the weight of the package and on the country of destination. We try to offer you the best shipping rates and services, shipping all our orders through UPS. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination! You can even choose a quicker shipping option like UPS Express.

        Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!

        Customer Reviews

        No reviews yet
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)

        Customer Reviews

        No reviews yet
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        0%
        (0)