PEEK Capillary Tubing (1.5 m)
Rated 3.5/5 based on 11 customer reviews

PEEK Capillary Tubing (1.5 m)

Tubing in PEEK for general lab use. PEEK is a inert fluoropolymer, with a high chemical compatibility and a working temperature range of -50°C up to +250°C. This PEEK capillary tubing can be used in a microfluidic system for demanding applications with high pressure or agressive fluids, but also as a fluidic resistance.
Length of 1.5 m, 1/16" (1.6 mm) outer diameter and various inner diameters.
Available immediately
€35.50
Tubing in PEEK for general lab use. PEEK is a inert fluoropolymer, with a high chemical compatibility and a working temperature range of -50°C up to +250°C. This PEEK capillary tubing can be used in a microfluidic system for demanding applications with high pressure or agressive fluids, but also as a fluidic resistance.
Length of 1.5 m, 1/16" (1.6 mm) outer diameter and various inner diameters.

PEEK tubing for microfluidics

PEEK is one of the most performant thermopolymers, combining outstanding thermal properties and a high chemical compatibiliy with a wide range of organic and inorganic chemicals.

In microfluidics, PEEK can be used for high-pressure applications, where stiffness is needed, or with agressive solvents. Also, PEEK tubing can be extruded with small inner diameters, allowing to work with very low volumes. Finally, a few centimeters of PEEK tubing can be connected to a microfluidic line to increase its fluidic resistance.

Included: 1.5 m of PEEK tubing, 1/16" (1.6 mm) OD

Available ID sizes:

  • 65 µm
  • 100 µm
  • 125 µm
  • 15 µm
  • 250 µm
  • 500 µm
  • 750 µm
  • 1 mm

Payment Terms

You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!

Credit card 

  • Add your products to the cart
  • In the cart page, click on Proceed to Checkout
  • Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
  • That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.

Invoice

  • Add your products to the cart
  • In the website header, click on Request a Quote
  • Fill in the required informations, then click on Submit Quote
  • Our team will send you a quote shortly
  • After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
  • Our team will complete your purchase and send you the invoice!

If you wish to pay in USD, AUD or GBP, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.

 

Worldwide shipping

We ship worldwide from our warehouse in France.

The shipping charges are calculated based on the weight of the package and the country of destination: you can estimate the shipping cost on the cart page. We try to offer you the best shipping rates and services, shipping all our orders through DHL Express. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination! 

Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)