Peroxide-cured Silicone Pump Tubing (25 ft. / 7.62 m)

Peroxide-cured Silicone Pump Tubing (25 ft. / 7.62 m)

Available: In Stock
Silicone tubing blended with organic peroxide, designed for pumping operations and biological applications. It is non-toxic, odourless and has an excellent resistance to compression.
This tubing complies with USP Class VI and FDA certifications. It is autoclavable in saturated steam (working temperature range of -51°C to +238°C).
Sold by rolls of 25 ft. (7.62 m).
€51.20
Silicone tubing blended with organic peroxide, designed for pumping operations and biological applications. It is non-toxic, odourless and has an excellent resistance to compression.
This tubing complies with USP Class VI and FDA certifications. It is autoclavable in saturated steam (working temperature range of -51°C to +238°C).
Sold by rolls of 25 ft. (7.62 m).

A peroxide-cured silicone tubing for general applications

  • Autoclavable in saturated steam
  • Biocompatible: complies with USP Class VI and FDA certifications
  • Long life, designed for pumping operations
  • Non-toxic, odourless
  • Waterproof and resistant to ozone, radiation and sunlight
  • Wall thickness of 1.6 mm or 2.4 mm, compatible with ISMATEC Reglo Quick and Ecoline VC peristaltic pumps

Specifications

 Material Length per pack Working temperature range Appearance Sterilization
Silicone (peroxide-cured) 25 ft. (7.62 m) -51°C to +238 °C Soft, translucent, clear to light amber
  • Autoclavable with steam, 30 minutes at 1 bar (15 psi) and 121°C (250°F)
  • Radiation: Irradiate at up to 2.5 mrad

 

 Tubing ID (mm) Tubing OD (mm) Wall thickness (mm)
0.8 4 1.6
1.6 4.8 1.6
3.2 6.4 1.6
4.8 8 1.6
4.8 9.6 2.4
6.4 11.2 2.4
  

Chemical resistance

More details can be found here.

 Acids Limited
Alkaline solutions Good
Solvents Not recommended
Pressure Not recommended
Vacuum Good
Viscous media Fair
Sterile media Excellent


Gas permeability (at 25°C)

CO2

25147

N2

2284
O2 4715

The permeability coefficient is calculated using the following formula:

((Amount of Gas (cm3) x tubing wall thickness (cm)) /  (Surface Area of tubing ID (cm3) x time (sec) x pressure drop across tubing wall (cm Hg))) * 10-10

 

Payment Terms

You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!

Credit card 

  • Add your products to the cart
  • In the cart page, click on Proceed to Checkout
  • Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
  • That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.

Invoice

  • Add your products to the cart
  • In the website header, click on Request a Quote
  • Fill in the required informations, then click on Submit Quote
  • Our team will send you a quote shortly
  • After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
  • Our team will complete your purchase and send you the invoice!

If you wish to pay in USD, AUD or GBP, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.

 

Shipping

The shipping charges are calculated based on the weight of the package and on the country of destination. We try to offer you the best shipping rates and services, shipping all our orders through DHL Express. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination! 

Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)