-
Neu
WHS
Mechanical Wafer Pick with SpatulaThe WHS-G2 Mechanical Wafer Pick with Spatula is a cleanroom-compatible edge grip handling tool designed for safe manual transfer of wafers from hotplates, platens, and vacuum chucks. General The WHS-G2 series is a precision manual wafer handling tool... -
Neu
POLOS
Liners for the SPIN150xThe POLOS SPIN150x Liners are reusable anti-static PET liners designed to protect the spin bowl and lid during coating, developing, and chemical processing applications. General The POLOS SPIN150x Liner Set is designed for use with the POLOS SPIN150x... -
Neu
POLOS
Hot Plate - POLOS HOTPLATE 350 AdvancedThe POLOS Hotplate 350 Advanced is a precision, cleanroom ready, laboratory hotplate designed for soft bake, hard bake, and curing processes on substrates up to 300 mm. General The POLOS Hotplate 350 Advanced is designed for R&D, Cleanroom,... -
Neu
WHS
Wafer Handling Vacuum WandThe WHS Vacuum Wand systems provide cleanroom-safe wafer and device handling solutions, available in corded and cordless configurations for flexible laboratory and semiconductor applications. General The WHS Vacuum Wand range is designed for safe and... -
Neu
POLOS
Hot Plate - POLOS HOTPLATE 200The POLOS Hotplate 200 Standard and Advanced are precision cleanroom-compatible laboratory hotplates designed for soft bake, hard bake, and curing processes requiring accurate and repeatable temperature control. General The POLOS Hotplate 200 series is... -
Neu
POLOS
Spin Coater - POLOS SPIN150x TabletopThe POLOS SPIN150x Standard and Advanced are precision cleanroom-compatible spin coaters for repeatable substrate processing up to 150 mm, available in NPP or PTFE and designed for tabletop operation. General The POLOS SPIN150x series is designed for... -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt Bartels Mikrotechnik
Liquid Low Flow Control KitThe Liquid Low Flow Control Kit is designed for precise handling of very small liquid volumes in applications where stability, accuracy and gentle fluid delivery are critical. Typical flow ranges from 5 µl/min to 2 ml/min. The kit contains BP7...1,699.00€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt Bartels Mikrotechnik
Liquid High Flow Control KitThe Liquid High Flow Control Kit is designed for stable and powerful liquid transport in demanding fluidic applications requiring continuous high-volume flow from 100 µl/min up to 40 ml/min. The kit contains BP7 Tubing pumps, the mp-Multiboard2...1,699.00€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt Bartels Mikrotechnik
CO2 Monitoring KitThe CO2 Monitoring Kit is designed for continuous measurement of carbon dioxide concentrations in air using an integrated CO2 gas sensor. The kit contains BP7 Tubing pumps, the mp-Multiboard2 controller, the mp-Highdriver pump driver, a CO2 gas level...999.00€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt Bartels Mikrotechnik
VOC Monitoring KitThe VOC Monitoring Kit is designed for continuous measurement of volatile organic compounds in air using an integrated VOC gas sensor. The kit contains BP7 Tubing pumps, the mp-Multiboard2 controller, the mp-Highdriver pump driver, a VOC gas level...999.00€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt Bartels Mikrotechnik
Pressure Control KitThe Pressure Control Kit is designed to maintain defined pressure levels in fluidic applications using closed-loop control based on real-time sensor feedback. The kit contains BP7 Tubing pumps, the mp-Multiboard2 controller, the mp-Highdriver pump...1,599.00€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt microfluidic ChipShop
Handling Frame for ChipShop Self-Sealing ChipsThis handling frame is designed to easily interface your self-sealing ChipShop microfluidic chips. General The handling frame for self-sealing chips is designed to securely attach self-sealing and removable chips, such as Fluidic 745, to smooth, clean...244.00€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt Bartels Mikrotechnik
Volume Dispensing KitThe Volume Dispensing Kit is designed for high-accuracy liquid handling by controlling pump operation based on measured flow until a defined target volume is reached. The kit contains BP7 Tubing pumps, the mp-Multiboard2 controller, the mp-Driver pump...1,699.00€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt Bartels Mikrotechnik
Pressure Driven Flow Control KitThe Pressure Driven Flow Control Kit provides accurate and reproducible flow control by combining pressure-driven actuation with real-time flow measurement. Its integrated components support stable operation, low pulsation, and reduced maintenance...1,749.00€ -
Neu
Optionen wählen Masterflex
L/S Peroxide-Cured Silicone Pump Tubing (7.6 m)Masterflex peroxide-cured silicone tubing offers excellent biocompatibility for a wide range of applications using Masterflex L/S drives and pump heads. Compatible with any pump heads accepting L/S tubing, 7.6 m / 25 ft per roll. General Masterflex...98.30€ - 278.00€ -
Neu
CADworks3D
3D Printing Resin Bundle - Clear MicrofluidicA complete resin bundle developed for high-resolution, transparent microfluidic fabrication, enabling fast design, iteration, and testing directly at the bench. This bundle brings together all required components to start working with Clear Microfluidic...1,338.50€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt SynVivo
SynVivo Pneumatic PrimerThis Pneumatic Primer enables efficient removal of air bubbles from microfluidic devices using controlled low-pressure gas. Designed for use with SynVivo chips and compatible with single or multi-device priming. General The Pneumatic Primer is a...406.00€ -
NeuAngebot
In den Warenkorb Der Artikel wurde hinzugefügt Droplet Genomics
Co-Flow Droplet Generator - PDMS - 30-40 µm / 1.2 mmCo-flow droplet generators to generate monodisperse emulsions, with one oil inlet, two water inlets, and one outlet. 6 devices per chip, with 1.2 mm punched holes to accommodate most tubing sizes. The design is designed to generate droplets from 30...Jetzt: 120.00€Was: 188.00€ -
Neu
Optionen wählen SynVivo
Microvascular Network - SMN1 chips (pack of 3)Microvascular network chips allow replication of in vivo cell/particle or cell/cell interactions based on actual microvascular network images for more physiological modeling. These chips come in a wide range of designs, some even including one or more...313.60€ -
Neu
Optionen wählen ELVEFLOW
PDMS Starter KitThe PDMS Starter Kit is a practical, ready-to-use bundle designed to provide the essential equipment and consumables needed to begin casting PDMS devices in the lab. Instead of sourcing each component separately, this kit brings together the core tools...6,971.00€ -
Neu
CADworks3D
3D Printing Resin Bundle - Cyto-ClearA complete photopolymer resin bundle engineered for cell-compatible microfluidics, enabling researchers to design, fabricate, and test biological systems directly on the bench. This bundle includes all components required to start working with Cyto-Clear...1,136.70€ -
Neu
Optionen wählen CADworks3D
Professional CureZone UV Post-Curing UnitA dedicated UV curing solution for the optimal post-processing of 3D printed microfluidic devices, ensuring reliable material properties, enhanced surface smoothness, and proven biocompatibility. General The Professional CureZone delivers controlled UV...504.30€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt CADworks3D
Smooth Buildplate for Profluidics 285DA precision-engineered smooth build plate designed to enhance surface finish and print quality for microfluidic applications, ensuring reliable first-layer adhesion and consistent fabrication results. General Smooth build plate for enhanced print...165.30€ -
Neu
In den Warenkorb Der Artikel wurde hinzugefügt CADworks3D
Rough Buildplate for Profluidics 285DThis build plate is designed for consistent, high-quality microfluidic 3D printing with your Profluidics 285D. It ensures reliable adhesion, accurate feature reproduction, and repeatable print performance across demanding applications. General The...143.30€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
