-
Choose Options Darwin Microfluidics
PDMS Sheet for MicrofabricationHigh-quality PDMS (polydimethylsiloxane) sheets available in thicknesses from 20 µm to 3000 µm and 250 x 250 mm dimensions. Ideal for easier microfluidics devices fabrication, but also for biomedical devices and electronics. General Our PDMS...53.50€ - 83.50€ -
Choose Options Darwin Microfluidics
Sylgard 184 PDMS ElastomerThe most popular PDMS formulation for microfluidic chip fabrication, thanks to its unique properties: high transparency, low surface energy, biocompatibility, and good chemical resistance. Sylgard 184 PDMS can be molded into a variety of shapes and sizes...268.50€ - 1,055.50€ -
Add to Cart The item has been added Emulseo
Fluo-ST3 Hydrophobic Surface TreatmentThe Fluo-ST3 surface treatment by Emulseo enhances the hydrophobicity of microfluidic chip channel walls, improving aqueous droplet performance and stability in fluorinated oils during droplet generation experiments. Supplied in a vial, volume of 8 mL...74.00€ -
Choose Options Darwin Microfluidics
PDMS Roll for MicrofabricationHigh-quality PDMS (polydimethylsiloxane) rolls available in thicknesses from 20 µm to 3000 µm. Ideal for easier microfluidics devices fabrication, but also for biomedical devices and electronics. Sold by the meter (up to 40 meters). To order...229.00€ - 955.70€ -
Choose Options Eden Tech
Flexdym Starter Pack - An Alternative to PDMSDiscover this brand-new biocompatible polymer with this starter pack! The Flexdym is an excellent alternative to PDMS for microfluidic applications: self-sealing, resistant, cost-effective, and biocompatible: it will significantly ease your work when...360.00€ -
Choose Options KemLab
SQ Negative Epoxy Photoresist for MicrofluidicsSQ™ is a negative tone epoxy photoresist specifically formulated for microfluidics and PDMS molding. Sensitive to Near-UV, i-line and broadband wavelengths, it is a great alternative to SU8. SQ™ uses superior epoxies, now adapted to...129.50€ - 11,301.00€ -
Add to Cart The item has been added Darwin Microfluidics
PDMS Hardener for MicrofluidicsFabricate your microfluidics chips with ease with our PDMS hardener. Specially formulated to work with common elastomers, this PDMS hardener enables consistent, high-quality fabrication of PDMS (polydimethylsiloxane) microfluidic chips. Bottle of 0.5 kg...455.00€ -
Add to Cart The item has been added Emulseo
Fluo-ST1 Hydrophobic Surface TreatmentThe Fluo-ST1 surface treatment from Emulseo is a fluorophilic surface coating agent to increase the performance and stability of aqueous droplets in fluorinated oils. Supplied in a vial filled with argon, volume of 7 mL. General The surface treatment...103.00€ -
Add to Cart The item has been added Eden Tech
Flexdym Pellet Polymer for Mass ProductionThe Flexdym pellets are ideal for experienced users who have developed a marketable product using this technology and wish to begin mass production or 3D printing. The pellets are sold at different prices based on weight ranges: 1-10 kg, 11-1,000 kg, and...55.00€ -
New
Choose Options Darwin Microfluidics
PTFE Sheet for MicrofabricationHigh-quality PTFE (polytetrafluoroethylene) sheets available in multiple thicknesses (0.05 to 1.50 mm), two widths (300 mm and 600 mm), and a fixed length of 1 meter. Ideal for chemical-resistant liners, low-friction interfaces, electrical insulation,...19.00€ - 313.00€ -
Choose Options Eden Tech
Flexdym Roll for Microfluidic Device DevelopmentThe Flexdym is an excellent alternative to PDMS for microfluidic applications: self-sealing, resistant, cost-effective, and biocompatible: it will significantly ease your work when fabricating microfluidics devices. General Boost the production of your...1,990.00€ - 4,990.00€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
