-
Add to Cart The item has been added BFlow
Male Luer to Barbed ConnectorUse this Luer lock connector to interface silicone tubing with your medium reservoir. General This male Luer Lock to barbed connector allows you to connect your silicone tubing with your medium reservoir via a needle. Sold in packs of 5, these...50.00€ -
Add to Cart The item has been added BFlow
Stopper connectorThis connector allows an ideal and tight connection between a silicone tube (1 mm ID) and a tube (2.7 mm OD) with stoppers of a peristaltic pump. General With this connector, it is easy to interface silicone tubing coming from your BFlow microfluidic...50.00€ -
Add to Cart The item has been added BFlow
Straight ConnectorThese connectors allow interfacing of silicone tubing with microfluidic chips. They are compatible with 1 mm ID tubing and 3 mm diameter punched holes. General These barbed straight connectors allow easy connection of soft-wall tubing directly with...50.00€ -
Add to Cart The item has been added BFlow
Straight Press-in PlugClose the chips inlets/outlets with these press-in plugs to prevent evaporation or contamination of your experiment. Designed for holes of 3 mm diameter and autoclavable. General These press-in plugs have been designed to close punched holes of 3 mm...50.00€ -
Choose Options BFlow
Syringe Needles - Bevel TipThese sterile needles can be used for easy tubing connections with a syringe or a reservoir's septum cap. They present a beveled tip and exist in 2 sizes: 18G and 20G. General Packs of 10 sterile needles with a beveled tip, in 18G or 20G for easy...10.00€ -
Add to Cart The item has been added BFlow
Y Connector Barbed BFlow (pack of 5)This Y connector is compatible with BFlow's chips for easy connection of different flexible tubes. These connectors are available in packs of 5. General These Y connectors can be used to link different silicone tubes to achieve convergence or divergence...50.00€ -
Add to Cart The item has been added microfluidic ChipShop
Pipetting Interface Plugs (pack of 10)The Fluidic 1225 Pipetting Interface Plugs by Microfluidic ChipShop are specifically designed to block unused ports on the new ChipShop pipette interface chips. Sold in packs of 10 plugs. General Block your female pipette interfaces on ChipShop chips...19.00€ -
Choose Options Masterflex
Microbore Tubing Straight Connectors (pack of 2)Create a leak-free seal between your microbore pump tubing and extension tubing. Available for most Ismatec microbore tubing sizes from 0.13 mm up to 0.89 mm. Pack of 2 units. General These straight connectors are designed to ensure a secure connection...110.00€ -
Add to Cart The item has been added microfluidic ChipShop
Male Luer Tube Tuck Connectors for 1/32" OD Tubing (pack of 10)The Fluidic 1580 Male Luer Tube Tuck Connector by Microfluidic ChipShop enables direct insertion of 1/32" OD rigid tubing (PTFE, PEEK, etc.) for a dependable connection with ChipShop Luer chips. PEEK capillary tubing is recommended to withstand at least...25.00€ -
Add to Cart The item has been added microfluidic ChipShop
Male Luer Tube Tuck Connectors for 1/16" OD Tubing (pack of 10)The Fluidic 1581 Male Luer Tube Tuck Connector by Microfluidic ChipShop enables direct insertion of 1/16" OD rigid tubing (PTFE, PEEK, etc.) for a dependable connection with ChipShop Luer chips. PEEK capillary tubing is recommended to withstand at least...25.00€ -
Add to Cart The item has been added microfluidic ChipShop
Male Mini Luer Tube Tuck Connectors for 1/16" OD Tubing (pack of 10)The Fluidic 1579 Male Mini Luer Tube Tuck Connector by Microfluidic ChipShop enables direct insertion of 1/16" OD rigid tubing (PTFE, PEEK, etc.) for a dependable connection with ChipShop mini Luer chips. PEEK capillary tubing is recommended to withstand...19.00€ -
Choose Options New Era Pump Systems
New Era Pusher Block for 50 & 100 mL Glass SyringesA replacement pusher block for 50 and 100 mL glass syringes to fit perfectly into New Era syringe pumps. General This pusher block allows large glass syringes to sit properly on the syringe holder block of New Era syringe pumps. Easily replace...2.20€ - 14.20€ -
Add to Cart The item has been added Advanced Microfluidics
Advanced Microfluidics Connectors and Tubing KitA kit of connectors and tubing for Advanced Microfluidics devices. Includes 12x flat-bottom fittings (nut + ferrule), and 1.5 m of 1/16" OD x 0.5 mm ID PTFE tubing. General Designed for optimal use with Advanced Microfluidics instruments, this kit...214.80€ -
Add to Cart The item has been added Micronit
Teflon Plugs for Fluidic Connect Pro Chip Holder (pack of 10)A set of 10 PTFE plugs to block any inlet/outlet. For use in combination with the Fluidic Connect Pro chip holder and 1/16" OD tubing. General These Teflon plugs block the flow from or to channel inlets/outlets of the Fluidic Connect Pro chip holder. The...43.00€ -
Add to Cart The item has been added IDEX Health & Science
Ferrule 10-32 Coned for NanoPort (pack of 10)Ferrules in ETFE for 1/16" OD tubing. Use these ferrules with the NanoPort assemblies. Sold in packs of 10 units. General Connect your 1/16" OD rigid tubing to your chip through the NanoPort assembly, using this ETFE ferrule. Content 10x ETFE ferrule...63.60€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned PEEK Fittings for NanoPort (pack of 10)These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless fittings Highly inert and chemical-resistant PEEK material for a...92.20€ -
Choose Options IDEX Health & Science
1/4-28 PEEK Union AdapterThis PEEK 1/4-28 union adapter is designed to connect two rigid tubings. Optional 1/4-28 PEEK fittings and ETFE ferrules for 1/16" OD or 1/8" OD tubing. General The 1/4-28 union efficiently connects tubing in a microfluidic system where a dependable...18.40€ - 31.50€ -
Choose Options microfluidic ChipShop
Male Mini Luer Plugs - Rows of four (pack of 10)These Fluidic 336 rows of mini Luer plugs are designed to block four successive unused ports on the ChipShop mini Luer-compatible chips. Sold in packs of 10 rows. General These rows of four male mini Luer plugs can block any adjacent female...19.00€ -
Choose Options microfluidic ChipShop
Male Mini Luer Plugs - Twins (pack of 10)Fluidic 335 male mini Luer twin plugs designed to block unused adjacent ports on ChipShop mini Luer-compatible chips. Sold in packs of 10 plugs. General Block any pair of female mini Luer ports on the ChipShop chips with these male mini Luer twin plugs...19.00€ -
Choose Options microfluidic ChipShop
Male Mini Luer Fluid Connectors - Rows of four (pack of 10)The Fluidic 333 Male Mini Luer Fluid Connectors by Microfluidic ChipShop are expertly designed to interface with four adjacent ChipShop mini Luer ports. Suitable for silicone or flexible tubing with an ID ≤ 1 mm. Sold by packs of 10 rows of four...19.00€ -
Choose Options microfluidic ChipShop
Male Mini Luer Fluid Connectors - Twins (pack of 10)The Fluidic 332 Twin Male Mini Luer Fluid Connectors by Microfluidic ChipShop are designed to seamlessly connect your tubings to adjacent ChipShop mini Luer ports. Suitable for silicone or flexible tubing with an ID ≤ 1 mm. Sold in packs of 10 twin...19.00€ -
Add to Cart The item has been added ELVEFLOW
1/4-28 Swivel to Barbed 3/32" ID Adapter (pack of 10)1/4-28 swivel fittings for 3/32" ID soft-walled tubing (often used for pneumatic pressure distribution). Reusable, highly versatile, and compatible with a large range of microfluidic equipment. General A kit of 1/4-28 fittings for 3/32" ID tubing...48.00€ -
Choose Options Masterflex
Male Luer Slip to Barb Adapters (pack of 10)A pack of Luer Slip to Barb adapters in Polypropylene or Medical Nylon to connect any Luer Female port to a soft-walled tubing. Available in a pack of 10 units in Polypropylene or Medical Nylon, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), or...8.70€ - 9.50€ -
Choose Options Masterflex
Male Luer Lock to Barb Adapters (pack of 10)A pack of Luer Lock to Barb adapters in Polypropylene or Medical Nylon to connect any Luer Female port to a soft-walled tubing. Available in a pack of 10 units in Polypropylene or Medical Nylon, for tubing ID sizes of 1/16" (1.6 mm), 3/32" (2.4 mm), or...9.50€ - 13.00€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
