Fittings & Connectors

Microfluidic Fittings & Connectors are a crucial tool for the advancement of scientific research. Microfluidic Fittings & Connectors are carefully designed components used to interface and integrate microfluidic modules, systems, and instruments. These components are used for the purpose of connecting and controlling fluid flow within a microfluidic system.

These components, meticulously designed, interface and integrate microfluidic systems, ensuring controlled fluid flow. Beyond connection, they offer tight seals, efficient pathways, and flow uniformity, granting researchers precise control.

162 Results

Add to Cart The item has been added

IDEX Health & Science
10-32 Coned Union Adapter
This 10-32 coned union adapter is designed to interface two 10-32 coned fittings. Manufactured in PEEK, allowing an excellent chemical resistance. Sold by pack of 1 unit. General The 10-32 coned NanoTight union efficiently connects tubing in a...

Now: (Inc. Tax)

MSRP:

Was:

Now: 61.90€

MSRP:

Was:
Add to Cart The item has been added

IDEX Health & Science
VacuTight Ferrule 1/4-28 for 1/8” OD (pack of 10)
VacuTight 1/4-28 ferrules to maintain 1/8" OD tubing through vacuum and low-pressure conditions. Sold in packs of 10 units. General VacuTight ferrules are to be combined with VacuTight nuts to strongly hold 1/16" OD rigid tubing into 1/4-28 female ports...

Now: (Inc. Tax)

MSRP:

Was:

Now: 19.90€

MSRP:

Was:
Add to Cart The item has been added

IDEX Health & Science
10-32 Flat-Bottom Plugs (pack of 5)
These 10-32 flat-bottom plugs made in Delrin acetal are perfect for closing off unused ports in valves and multi-port connectors. Sold by pack of 5 units. General This plug with a 10-32 flat-bottom thread port configuration is useful to close off unused...

Now: (Inc. Tax)

MSRP:

Was:

Now: 83.60€

MSRP:

Was:
Add to Cart The item has been added

IDEX Health & Science
NanoTight Sleeves 1/16" OD for 555-595 µm OD Tubing (pack of 10)
NanoTight sleeves are designed to adapt 555 to 595 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...

Now: (Inc. Tax)

MSRP:

Was:

Now: 36.80€

MSRP:

Was:
Add to Cart The item has been added

BFlow
Stopper connector
This connector allows an ideal and tight connection between a silicone tube (1 mm ID) and a tube (2.7 mm OD) with stoppers of a peristaltic pump. General With this connector, it is easy to interface silicone tubing coming from your BFlow microfluidic...

Now: (Inc. Tax)

MSRP:

Was:

Now: 50.00€

MSRP:

Was:
Add to Cart The item has been added

Micronit
Fluidic Connect Pro PEEK Connection Kit
A kit containing 5x ferrules for 1/16" OD tubing and 5m PEEK tubing to create a secure connection between your pump and the Fluidic Connect Pro chip holder from Micronit. General Use this kit with your Fluidic Connect Pro chip holder. The ferrules can...

Now: (Inc. Tax)

MSRP:

Was:

Now: 199.00€

MSRP:

Was:
Choose Options

IDEX Health & Science
Manifold 6 Ports 1/4-28 PEEK
Merge or split up to 5 microfluidic flows using this 6-port manifold with 1/4-28 PEEK fittings and ferrules for 1/16" OD or 1/8" OD tubing. General This PEEK Manifold Assembly can be easily applied for a multi-ports mixing chamber, combining several...

MSRP:

Now: 154.60€ - 368.40€

Was:
Choose Options

MicroBarb Peristaltic Tubing to 1/4-28 Adapters (pack of 25)
Easily connect your Tygon® tubing to any 1/4"-28 UNF fitting using the MicroBarb adapter from Diba. When working with ISMATEC peristaltic pumps, you can seamlessly extend your peristaltic tubing and securely connect any rigid or soft-walled...

Now: (Inc. Tax)

MSRP:

Was:

Now: 240.80€

MSRP:

Was:
Choose Options

New Era Pump Systems
New Era Pusher Block for 50 & 100 mL Glass Syringes
A replacement pusher block for 50 and 100 mL glass syringes to fit perfectly into New Era syringe pumps. General This pusher block allows large glass syringes to sit properly on the syringe holder block of New Era syringe pumps. Easily replace...

MSRP:

Now: 2.20€ - 14.10€

Was:
Add to Cart The item has been added

IDEX Health & Science
Flangeless Headless PPS Fittings + ETFE Ferrules 1/4-28 to 1/16" OD (pack of 10)
This convenient headless 1/4-28 fitting for 1/16" OD tubing is made of a PPS nut and an ETFE ferrule to ensure its high chemical resistance. Sold in packs of 10 fittings. General A set of PPS fittings with ETFE ferrules to interface any 1/16" OD rigid...

Now: (Inc. Tax)

MSRP:

Was:

Now: 98.90€

MSRP:

Was:
Add to Cart The item has been added

Micronit
Teflon Plugs for Fluidic Connect Pro Chip Holder (pack of 10)
A set of 10 PTFE plugs to block any inlet/outlet. For use in combination with the Fluidic Connect Pro chip holder and 1/16" OD tubing. General These Teflon plugs block the flow from or to channel inlets/outlets of the Fluidic Connect Pro chip holder. The...

Now: (Inc. Tax)

MSRP:

Was:

Now: 43.00€

MSRP:

Was:
Add to Cart The item has been added

IDEX Health & Science
1/4-28 Female to 1/4-28 Male Flat-Bottom Adapter
1/4-28 female to 1/4-28 male flat-bottom adapter. Manufactured in PTFE. Pack of 1 unit. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 1/4-28 port. Content 1x PTFE 1/4-28 female flat-bottom to 1/4-28 male flat-bottom...

Now: (Inc. Tax)

MSRP:

Was:

Now: 55.00€

MSRP:

Was:
Add to Cart The item has been added

Micronit
Sideconnect ETFE Connection Kit
A connection kit with ferrules and ETFE tubing to create a secure connection between your pump and the Sideconnect chip holder from Micronit. General A kit for connecting your pump to the Sideconnect chip holder. The ferrules can also be used with other...

Now: (Inc. Tax)

MSRP:

Was:

Now: 239.00€

MSRP:

Was:
Choose Options

BFlow
Syringe Needles - Bevel Tip
These sterile needles can be used for easy tubing connections with a syringe or a reservoir's septum cap. They present a beveled tip and exist in 2 sizes: 18G and 20G. General Packs of 10 sterile needles with a beveled tip, in 18G or 20G for easy...

Now: (Inc. Tax)

MSRP:

Was:

Now: 10.00€

MSRP:

Was:
Add to Cart The item has been added

BFlow
M Connector
This barbed connector can be used to link two inputs/outputs of a chip to soft-walled tubing, to avoid using two independent connectors. General This M connector is useful to connect two inputs/outputs of a chip to avoid using two single connectors...

Now: (Inc. Tax)

MSRP:

Was:

Now: 50.00€

MSRP:

Was:
Add to Cart The item has been added

Micronit
Ferrules for Sideconnect Chip Holder (pack of 5)
A set of 5x ferrules to connect your 1/16" OD tubing to the Sideconnect chip holder from Micronit. General Manufactured in FFKM, these ferrules offer the following advantages: Compatible with 1/16" OD tubing and Sideconnect chip...

Now: (Inc. Tax)

MSRP:

Was:

Now: 179.00€

MSRP:

Was:
Add to Cart The item has been added

IDEX Health & Science
Fingertight Ferrule 10-32 Coned for 1/16" OD Tubing (pack of 10)
Fingertight ferrules in PEEK for 1/16" OD tubing. Use these ferrules with Fingertight 10-32 coned nuts. Available in a pack of 10 units. General Connect your 1/16" (1.6 mm) OD tubing to a 10-32 coned port using a Fingertight nut and this ferrule...

Now: (Inc. Tax)

MSRP:

Was:

Now: 64.30€

MSRP:

Was:
Add to Cart The item has been added

IDEX Health & Science
Super Flangeless Ferrule PEEK 1/4-28 for 1/8” OD (pack of 10)
These Super Flangeless ferrules are adapted to 1/4-28 flat-bottom ports and 1/8” OD tubing. They resist high pressure. Sold in packs of 10 ferrules. General Manufactured in PEEK, these Super Flangeless ferrules provide high-pressure holding capability in...

Now: (Inc. Tax)

MSRP:

Was:

Now: 49.20€

MSRP:

Was:

Got A Question?

Got a question or need a custom microfluidic solution? Our experts are here to help! Whether you're looking for prototyping, design consultation, or bulk manufacturing, we provide tailored solutions to fit your needs.

Send Request