The L/S® MasterSense is a versatile drive with an integrated touch screen. Compact and powerful, it accepts all pump head and tubing options for high-precision fluid transfer and dispensing.
0.02 to 100 rpm and 0.1 to 600 rpm versions available, with optional connectivity and monitoring features MasterflexLive, EtherNet/IP™, Profibus, or analog signal.
General
Masterflex L/S MasterSense Drive
The MasterSense is a touch-screen peristaltic pump drive for accurate fluid delivery. It is compatible with all Masterflex L/S pump heads and tubing (pump heads sold separately).
- Compact format: small footprint on your lab bench
- Intuitive 5” (12.7 cm) capacitive TFT/RGB touch screen
-
Two motor speed options: 0.02 to 100 rpm, or 0.1 to 600 rpm
- Various options available for connectivity and monitoring: MasterflexLive, EtherNet/IP™, Profibus, or analog signal
- High precision brushless motor accuracy (±0.1% speed control accuracy)
- Save and retrieve dispense programs from the pump for rapid setup
- Various operating modes: continuous run, volume dispense, and time dispense modes - batch control and interval/off time in Volume and Time modes
- Anti-drip and speed ramping available in Volume dispense mode – ensure accuracy, minimize sample loss, and eliminate foaming
- Open-head sensor support included
- Regular firmware updates: take advantage of new features and improvements
- Stack up to two pump heads
Open-head sensor
This feature will shut off the pump when the pump head is opened, enhancing the worker's safety when changing the tubes. Whether it is accidental or intentional, power is removed and will be restored only when the pump head is closed.
Connectivity
MasterflexLive: real-time remote monitoring of all Masterflex pump parameters
EtherNet/IP, Profibus: digital communication protocols for automated operations
Compatible Pump Heads
Flow rate from 0.02 to 600 rpm (mL/min) |
07526-2x (100 rpm) |
07526-1x (600 rpm) |
|
Standard |
0.001 to 2900 |
✔️(2) |
✔️(2) |
Easy-Load |
0.001 to 2300 |
✔️(2) |
✔️(2) |
Easy-Load II |
0.001 to 2900 |
✔️(2) |
✔️(2) |
Easy-Load 3 |
0.001 to 2900 |
✔️(2) |
✔️(2) |
High-Performance |
0.018 to 3400 |
✔️(1) |
✔️(1) |
Multichannel (Microbore) |
0.00005 to 200 |
✔️(2, up to 16 channels) |
✔️(2, up to 16 channels) |
Multichannel (L/S) | 0.001 to 2300 | ✔️(2, up to 12 channels) | ✔️(2, up to 16 channels) |
Multichannel Cartridge |
0.001 to 1700 |
✔️(1, up to 8 channels) |
✔️(1, up to 8 channels) |
Reduced-Pulsation Multichannel Cartridge | 0.00001 to 350 | ✔️(1, up to 12 channels) | ✔️(1, up to 12 channels) |
PTFE-Tubing | 0.001 to 65 | ✔️(1) | ✔️(1) |
PTFE-Diaphragm | 10 to 800 | ✔️(1) | ✔️(1) |
Cytoflow | 0.03 to 7600 | ✔️(1) | ✔️(1) |
Content
1x L/S MasterSense peristaltic pump drive
1x 6-ft (1.8-m) line cord with IEC 320/CEE22 socket
Specifications
07526-2x (100 rpm) | 07526-1x (600 rpm) | |
Min rpm | 0.02 | 0.1 |
Max rpm | 100 | 600 |
Max number of heads | 2 | |
Speed control accuracy (resolution) | ±0.1% (0.1 rpm at 600 rpm; 0.01 rpm at 100 rpm) | |
Display | 5” capacitive TFT/RGB touch screen with in-plane switching (wide viewing angle); 800 x 480 pixels | |
MasterflexLive |
Real-time remote monitoring of all pump parameters. Push notifications alert you to operating conditions and error messages, allowing you to monitor critical pump processes 24/7 - no need to be onsite. |
|
External control - input |
0 to 20 mA, 20 to 0 mA, 4 to 20 mA, 20 to 4 mA 0 to 10 V, 10 to 0 V, 0 to 5 V, 5 to 0 V start/stop, direction (CW/CCW), prime via contact closure |
|
External control - output |
0 to 20 mA, 20 to 0 mA, 4 to 20 mA, 20 to 4 mA 0 to 10 V, 10 to 0 V, 0 to 5 V, 5 to 0 V Tach output (open collector), Motor running, Open head, Local/Remote, General alarm |
|
EtherNet/IP or Profibus | EtherNet/IP | Profibus |
Housing material | ABS plastic and aluminum | |
Approvals | UL, cUL, CE | |
Digital dispensing | Yes | |
Motor | Brushless DC with encoder - continuous duty - reversible - 1/10 hp (75 W) | |
Open-head sensor | Yes; extension cable included | |
IP rating | IP33 | |
Power supply | 90 - 260 VAC; 50/60 Hz | |
Operating temperature | 0 to 40 °C (32 to 104 °F) | |
Dimensions (L x W x H) | 26.0 x 19.4 x 21.6 cm (10.25" x 7.6" x 8.5") | |
Weight | 5 kg (11 lb) | |
Warranty | 2 years |
Documentation
The L/S® MasterSense is a versatile drive with an integrated touch screen. Compact and powerful, it accepts all pump head and tubing options for high-precision fluid transfer and dispensing.
0.02 to 100 rpm and 0.1 to 600 rpm versions available, with optional connectivity and monitoring features MasterflexLive, EtherNet/IP™, Profibus, or analog signal.
General
Masterflex L/S MasterSense Drive
The MasterSense is a touch-screen peristaltic pump drive for accurate fluid delivery. It is compatible with all Masterflex L/S pump heads and tubing (pump heads sold separately).
- Compact format: small footprint on your lab bench
- Intuitive 5” (12.7 cm) capacitive TFT/RGB touch screen
-
Two motor speed options: 0.02 to 100 rpm, or 0.1 to 600 rpm
- Various options available for connectivity and monitoring: MasterflexLive, EtherNet/IP™, Profibus, or analog signal
- High precision brushless motor accuracy (±0.1% speed control accuracy)
- Save and retrieve dispense programs from the pump for rapid setup
- Various operating modes: continuous run, volume dispense, and time dispense modes - batch control and interval/off time in Volume and Time modes
- Anti-drip and speed ramping available in Volume dispense mode – ensure accuracy, minimize sample loss, and eliminate foaming
- Open-head sensor support included
- Regular firmware updates: take advantage of new features and improvements
- Stack up to two pump heads
Open-head sensor
This feature will shut off the pump when the pump head is opened, enhancing the worker's safety when changing the tubes. Whether it is accidental or intentional, power is removed and will be restored only when the pump head is closed.
Connectivity
MasterflexLive: real-time remote monitoring of all Masterflex pump parameters
EtherNet/IP, Profibus: digital communication protocols for automated operations
Compatible Pump Heads
Flow rate from 0.02 to 600 rpm (mL/min) |
07526-2x (100 rpm) |
07526-1x (600 rpm) |
|
Standard |
0.001 to 2900 |
✔️(2) |
✔️(2) |
Easy-Load |
0.001 to 2300 |
✔️(2) |
✔️(2) |
Easy-Load II |
0.001 to 2900 |
✔️(2) |
✔️(2) |
Easy-Load 3 |
0.001 to 2900 |
✔️(2) |
✔️(2) |
High-Performance |
0.018 to 3400 |
✔️(1) |
✔️(1) |
Multichannel (Microbore) |
0.00005 to 200 |
✔️(2, up to 16 channels) |
✔️(2, up to 16 channels) |
Multichannel (L/S) | 0.001 to 2300 | ✔️(2, up to 12 channels) | ✔️(2, up to 16 channels) |
Multichannel Cartridge |
0.001 to 1700 |
✔️(1, up to 8 channels) |
✔️(1, up to 8 channels) |
Reduced-Pulsation Multichannel Cartridge | 0.00001 to 350 | ✔️(1, up to 12 channels) | ✔️(1, up to 12 channels) |
PTFE-Tubing | 0.001 to 65 | ✔️(1) | ✔️(1) |
PTFE-Diaphragm | 10 to 800 | ✔️(1) | ✔️(1) |
Cytoflow | 0.03 to 7600 | ✔️(1) | ✔️(1) |
Content
1x L/S MasterSense peristaltic pump drive
1x 6-ft (1.8-m) line cord with IEC 320/CEE22 socket
Specifications
07526-2x (100 rpm) | 07526-1x (600 rpm) | |
Min rpm | 0.02 | 0.1 |
Max rpm | 100 | 600 |
Max number of heads | 2 | |
Speed control accuracy (resolution) | ±0.1% (0.1 rpm at 600 rpm; 0.01 rpm at 100 rpm) | |
Display | 5” capacitive TFT/RGB touch screen with in-plane switching (wide viewing angle); 800 x 480 pixels | |
MasterflexLive |
Real-time remote monitoring of all pump parameters. Push notifications alert you to operating conditions and error messages, allowing you to monitor critical pump processes 24/7 - no need to be onsite. |
|
External control - input |
0 to 20 mA, 20 to 0 mA, 4 to 20 mA, 20 to 4 mA 0 to 10 V, 10 to 0 V, 0 to 5 V, 5 to 0 V start/stop, direction (CW/CCW), prime via contact closure |
|
External control - output |
0 to 20 mA, 20 to 0 mA, 4 to 20 mA, 20 to 4 mA 0 to 10 V, 10 to 0 V, 0 to 5 V, 5 to 0 V Tach output (open collector), Motor running, Open head, Local/Remote, General alarm |
|
EtherNet/IP or Profibus | EtherNet/IP | Profibus |
Housing material | ABS plastic and aluminum | |
Approvals | UL, cUL, CE | |
Digital dispensing | Yes | |
Motor | Brushless DC with encoder - continuous duty - reversible - 1/10 hp (75 W) | |
Open-head sensor | Yes; extension cable included | |
IP rating | IP33 | |
Power supply | 90 - 260 VAC; 50/60 Hz | |
Operating temperature | 0 to 40 °C (32 to 104 °F) | |
Dimensions (L x W x H) | 26.0 x 19.4 x 21.6 cm (10.25" x 7.6" x 8.5") | |
Weight | 5 kg (11 lb) | |
Warranty | 2 years |