-
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 125-165 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 125 to 165 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...$39.69 -
Choose Options microfluidic ChipShop
Sheath Flow Particle & Cell Sorting Chip - Mini LuerThe Fluidic 386 Chip by Microfluidic ChipShop is designed for particle and cell sorting using a sheath flow on the sample stream. Available in PMMA or COP (Zeonor). General ChipShop chips are convenient, cost-effective, and reliable for all your...$46.53 -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 70-110 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 70 to 110 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...$40.57 -
Add to Cart The item has been added Emulseo
Fluo-Break Emulsion BreakerThe Fluo-Break solution is an emulsion breaker from Emulseo. It is specifically developed to disrupt droplets that were stabilized with FluoSurf. Supplied in a glass vial of 10 mL. General The emulsion breaker Fluo-Break from Emulseo is a clear...$170.89 -
Choose Options Longer
BT100-3J Basic Peristaltic PumpA laboratory peristaltic pump to cover a wide range of applications, from 2 µL/min to 366.7 mL/min. This is the updated version of the BT100-2J. You can choose between two pump head types depending on the required flow rate. Silicone tubing...$797.55 - $1,066.01 -
Add to Cart The item has been added Darwin Microfluidics
Luer Lock Check Valve (pack of 10)One-way check valves for various applications, such as protecting your microfluidic system against backflows. These valves have a low cracking pressure (15 mbar = 0.217 psi) to be performant even at low flows. Pack of 10. General A check valve for...$22.93 -
Add to Cart The item has been added Darwin Microfluidics
Open Jaw Slide Clamp (pack of 100)Clamps for tubing up to 1.5 mm OD. Pack of 100 units. General A pack of 100 open jaw slide clamps for flexible tubing up to 1.5 mm OD. Manufactured in polypropylene (PP). Content 100x Open jaw slide clamp Specifications Material Polypropylene For...$77.29 -
Choose Options Darwin Microfluidics
Male to Male Luer Lock Connector (pack of 10)Quickly connect two Luer ports with this male-to-male Luer connector. Pack of 10 units. General Manufactured in PP or PC, this simple adapter is designed to connect two female Luer devices together. Robust and reusable, it can be used in any...$18.00 - $19.29 -
Add to Cart The item has been added Emulseo
Fluo-ST1 Hydrophobic Surface TreatmentThe Fluo-ST1 surface treatment from Emulseo is a fluorophilic surface coating agent to increase the performance and stability of aqueous droplets in fluorinated oils. Supplied in a vial filled with argon, volume of 7 mL. General The surface treatment...$113.56 -
Choose Options microfluidic ChipShop
Stir Bar Active Mixer Chip - Mini LuerThe Fluidic 286 Active Mixing Chip by Microfluidic ChipShop features integrated magnetic bars and offers a range of mixing chamber volumes, including 20, 40, 60, 80, 100, and 150 µL. Available in PMMA or COP (Zeonor). General ChipShop chips are...$90.96 -
Choose Options microfluidic ChipShop
3D Serpentine Mixer Chip - Mini LuerThe Fluidic 1079 Serpentine Mixer Chip by Microfluidic ChipShop features four identical micromixing units, each with 3 inlets and 1 outlet, equipped with mini Luer ports. The new design of this mixer allows efficient mixing thanks to its sequence of...$46.53 -
Choose Options microfluidic ChipShop
Male Mini Luer Tube Tuck Connectors for 1/32" OD Tubing (pack of 10)The Fluidic 997 Male Mini Luer Tube Tuck Connector by Microfluidic ChipShop enables direct insertion of 1/32" OD rigid tubing (PTFE, PEEK, etc.) for a dependable connection with ChipShop mini Luer chips. PEEK capillary tubing is recommended (1/32" OD x 0...$20.95 -
Add to Cart The item has been added Darwin Microfluidics
PTFE Tubing 1/32" OD x 0.30 mm ID for MicrofluidicsPTFE or Teflon is widely used in microfluidic experiments due to its excellent solvent resistance, higher continuous service temperature, and superior polymer purity. 30 m Teflon PTFE tubing with 1/32" (0.76 mm) OD and 0.30 mm ID for your daily needs...$90.29 -
Choose Options Emulseo
FluoSurf Nonionic Surfactant - NeatFluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with pH or temperature variations, allowing the production of...$452.03 - $457.54 -
Add to Cart The item has been added New Era
Step-down Transformer 220V to 110VStep-down transformer from 220V to 110V, used with the New Era Heating Kit. General A step-down transformer to be used with the Heating Kit from New Era in countries where the voltage is above 120V.$29.88 -
Choose Options New Era
New Era Additional Syringe Heating PadAdditional heating pads, to be used with the Syringe Heater Kit. Available in two versions: 1LG (9 x 7.5 cm / 3.5" x 3.0") or 5SP (50 x 1.5 cm / 20" x 0.625"). General Heat multiple syringes from one control unit. Choose between two heating pad...$119.73 -
Choose Options New Era
New Era Syringe Heater KitHeat your syringes and control their temperature up to 185 °C! This kit includes a control unit and a primary syringe heater pad to heat one syringe. Available in two versions: 1LG (9 x 7.5 cm / 3.5" x 3.0") or 5SP (50 x 1.5 cm / 20" x 0.625"). General A...$477.60 -
Add to Cart The item has been added Bartels Mikrotechnik
mp-advance Evaluation SetThe mp-advance Evaluation Set is the most complete bundle to use Bartels products line for a wide range of applications. The set contains 1x mp-Multiboard2 controller with 4 driver chips (Lowdriver, Driver, Highdriver, and Highdriver4), 6x BP7...$1,840.07 -
Add to Cart The item has been added Bartels Mikrotechnik
mp-mol Molex Connector for Bartels Micropumps (pack of 10)Molex connectors for custom-made cabling of Bartels BP7 and mp6 micropumps. Pack of 10 units. General Connect any BP7 or mp6 micropump to your control board with these Molex connectors. Content 10x mp-mol Molex...$14.33 -
Add to Cart The item has been added Bartels Mikrotechnik
mp-mf Mounting Frame for Bartels MicropumpsA mounting frame for BP7 and mp6 micropumps. General Insert a BP7 or mp6 micropump in this mounting frame to easily fix the pump in your integrated system. Content 1x mp-mf mounting frame for Bartels micropumps Specifications Dimensions 33 x 18 x 4...$7.17 -
Add to Cart The item has been added Bartels Mikrotechnik
mp-valvedriverT for Bartels MultiboardUse the mp-valvedriverT to control the Takasago SMV-2R-BN1F from the Multiboard or Multiboard2. General The mp-valvedriverT is a driver used to control Takasago SMV-2R-BN1F valves on the Bartels Multiboard and Multiboard2. Use of this driver is...$110.25 -
Add to Cart The item has been added Bartels Mikrotechnik
SMV 2/2 NC Takasago Active Valve for Bartels MultiboardA shape-memory alloy valve from Takasago, fully integrated with the Bartels Multiboard2 system (with the mp-valvedriverT). General Takasago SMV is an almost-silent and low-power 2/2 normally closed valve, controllable through the Bartels Multiboard2...$35.28 -
Add to Cart The item has been added Bartels Mikrotechnik
mp-bt Bubble Trap for Bartels MicropumpsA bubble trap to remove bubbles from water-based solutions while using Bartels micropumps. General Remove bubbles from your flow stream using Bartels micropumps. The bubble trap must be used with a Bartels BP7 or mp6 pump connected to the air outlet...$52.92 -
Add to Cart The item has been added Bartels Mikrotechnik
mp-t 1.3 mm Tygon Tubing for Bartels Micropumps (1 m)Compatible Tygon tubing for Bartels BP7 and mp6 micropumps. Tubing ID of 1.3 mm. General A transparent Tygon tubing of 1.3 mm x 3 mm (ID x OD), sterilizable by autoclave or EtO. Content 1x 1m Tygon tubing 1.3 mm ID Specifications Tubing ID 1.30...$11.03
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
