Easily connect your Tygon® tubing to any 1/4"-28 UNF fitting using the MicroBarb adapter from Diba. When working with ISMATEC peristaltic pumps, you can seamlessly extend your peristaltic tubing and securely connect any rigid or soft-walled tubing to the female 1/4"-28 UNF end of the MicroBarb adapter.
Sold by pack of 25 units, select the adapter according to the ID of your peristaltic tubing.
General
MicroBarb peristaltic tubing to 1/4"-28 UNF adapters
Diba MicroBarb adapters are used to securely connect flexible tubing (Tygon®, silicone...) and rigid tubing (PTFE, FEP...), for example when extending your fluidic line from a ISMATEC peristaltic pump. It is made in chemically inert PEEK for a broad compatibility.
Adapters feature two components:
-
A barbed component to fit inside the tube ID
-
Threaded outer connector that slips over the tubing OD to secure the barb in place and create a female threaded 1/4"-28 UNF flat-bottom port
It is then easy to screw a 1/4"-28 UNF nut with ferrule in order to create a secured and leak-free connection.
The available dimensions match those of ISMATEC Tygon® and silicone two-stop and three-stop tubing for peristaltic pumps.
Specifications
Material: PEEK
Units per pack: 25
| Barb size / Peristaltic tubing ID (mm) |
Compression size / Peristaltic tubing OD (mm) |
| 0.25 |
2.34 |
| 0.38 |
2.21 |
| 0.51 |
2.34 |
| 0.89 |
2.57 |
| 1.02 |
2.70 |
Documentation
Check the chemical compatibilities for this product here: PEEK - Chemical Compatibility Chart
