Stainless Steel Straight PDMS Couplers
Stainless steel connectors to connect your tubing to your PDMS microfluidic chips, perfect for use with silicone or Tygon microfluidic tubing.
Reusable and easily installable.
General
Make a reliable connection between a PDMS chip and soft-walled tubing with these stainless steel connectors.
- Material: 304 stainless steel
- Autoclavable, reusable
- Recommended use: tubing to chip connections with silicone or Tygon tubing (see the table below for tubing ID correspondence)
- Suitable for punched holes in PDMS chips
- Length: 15 mm
- Blunt tip (90° cut)
Choose between packs of 20 or 100 units of stainless steel couplers, each 15 mm long.
These fitted stainless steel fluidic couplers are used to connect your soft-walled tubing to your PDMS device, according to the following table:
Coupler gauge | Coupler OD | Coupler ID | Tubing ID range | Puncher size |
16G | 1.65 mm | 1.20 mm | 1.2 to 1.6 mm | 1.5 mm |
18G | 1.24 mm | 0.85 mm | 0.85 to 1.2 mm | 1.0 mm, 1.2 mm |
20G | 0.89 mm | 0.58 mm | 0.6 to 0.85 mm | 0.75 mm |
23G | 0.64 mm | 0.33 mm | 0.4 to 0.6 mm | 0.5 mm |
25G | 0.51 mm | 0.25 mm | 0.3 to 0.45 mm | 0.5 mm |
Tips:
- Always choose the coupler size with the closest OD above your soft-walled tubing ID
- These values only apply for durometer Shore A, 15 sec up to 80 (Tygon ND 100-80).
Content
20x or 100x Stainless steel straight couplers
Specifications
Material | 304 stainless steel |
Coupler gauge sizes | 16G, 18G, 20G, 23G, 25G |
Shape |
Total length 15 mm Blunt-ends (90° cut) |
Stainless steel connectors to connect your tubing to your PDMS microfluidic chips, perfect for use with silicone or Tygon microfluidic tubing.
Reusable and easily installable.
General
Make a reliable connection between a PDMS chip and soft-walled tubing with these stainless steel connectors.
- Material: 304 stainless steel
- Autoclavable, reusable
- Recommended use: tubing to chip connections with silicone or Tygon tubing (see the table below for tubing ID correspondence)
- Suitable for punched holes in PDMS chips
- Length: 15 mm
- Blunt tip (90° cut)
Choose between packs of 20 or 100 units of stainless steel couplers, each 15 mm long.
These fitted stainless steel fluidic couplers are used to connect your soft-walled tubing to your PDMS device, according to the following table:
Coupler gauge | Coupler OD | Coupler ID | Tubing ID range | Puncher size |
16G | 1.65 mm | 1.20 mm | 1.2 to 1.6 mm | 1.5 mm |
18G | 1.24 mm | 0.85 mm | 0.85 to 1.2 mm | 1.0 mm, 1.2 mm |
20G | 0.89 mm | 0.58 mm | 0.6 to 0.85 mm | 0.75 mm |
23G | 0.64 mm | 0.33 mm | 0.4 to 0.6 mm | 0.5 mm |
25G | 0.51 mm | 0.25 mm | 0.3 to 0.45 mm | 0.5 mm |
Tips:
- Always choose the coupler size with the closest OD above your soft-walled tubing ID
- These values only apply for durometer Shore A, 15 sec up to 80 (Tygon ND 100-80).
Content
20x or 100x Stainless steel straight couplers
Specifications
Material | 304 stainless steel |
Coupler gauge sizes | 16G, 18G, 20G, 23G, 25G |
Shape |
Total length 15 mm Blunt-ends (90° cut) |