-
Fastec
Fastec HS5 High-Speed CameraFastec HS5 camera is designed for the most demanding applications, where high resolution and speed are needed. Using a proven 12-bit CMOS sensor, the new HS5 allows a max resolution of 2560 x 2048,... -
Add to Cart Micronit
Fluidic Connect 4515 ETFE Connection KitA connection kit with fittings, ferrules, and ETFE tubing to create a secure connection between your pump and the Fluidic Connect 4515 chip holder from Micronit. General A kit for connecting your...325.00€ -
Add to Cart IDEX Health & Science
6-40 Flat-bottom Nut (pack of 10)This Headless Super Flangeless 6-40 Nut is designed to interface a 1/16"OD tubing to a 6-40 flat-bottom port. Use it to eliminate loosening of fittings due to tube twisting. The nut holds tight even...57.60€ -
Choose Options Innofluid
Fluid Pulse Damper - ChemistrySpecifically designed for peristaltic pumps, this damper reduces flow pulsation in microfluidic systems. Available for different tubing sizes, this industrial damper is suitable for chemistry and...56.60€ - 136.20€ -
Add to Cart Micronit
Fluidic Connect 4515 Stainless Steel Connection KitA connection kit with fittings, ferrules, and stainless steel tubing to create a secure connection between your pump and the Fluidic Connect 4515 chip holder from Micronit. This kit is recommended...475.00€ -
Add to Cart Bartels Mikrotechnik
Solenoid 3/2 Festo Active Valve for Bartels MultiboardOptimize your microfluidic system with this compact, high-performance 3/2 valve from Festo designed for precise and reliable fluid control. Fully integrated with the Bartels Multiboard2 system, to be...88.00€ -
Choose Options New Era Pump Systems
SyringeONE OEM Syringe PumpThe OEM version of the SyringeONE pump. Without its built-in user interface, this single-channel pump is more compact than its standard version while keeping the same performances. Various options...440.70€ - 953.40€ -
Add to Cart TissUse
HUMIMIC TubeHolder 3The HUMIMIC TubeHolder 3 is designed to connect any unused tubes while operating the HUMIMIC Starter. General The HUMIMIC product line by TissUse contains all the elements needed for...89.00€ -
Choose Options Sensirion
SLI Liquid Flow SensorSensirion SLI liquid flow sensor is a high-precision standalone solution to accurately measure low flow rates of liquids based on water or hydrocarbons. Its wide flow range, its short response time...1,344.10€ -
New
Add to Cart Bartels Mikrotechnik
Volume Dispensing KitThe Volume Dispensing Kit is designed for high-accuracy liquid handling by controlling pump operation based on measured flow until a defined target volume is reached. The kit contains BP7 Tubing...1,699.00€ -
Add to Cart IDEX Health & Science
Ferrule 10-32 Coned for NanoPort (pack of 10)Ferrules in ETFE for 1/16" OD tubing. Use these ferrules with the NanoPort assemblies. Sold in packs of 10 units. General Connect your 1/16" OD rigid tubing to your chip through the NanoPort...63.60€ -
Sale
Choose Options Sensirion
LG16 Liquid Flow SensorSensirion LG16 liquid flow sensor is a high-precision solution to accurately measure very low flow rates of liquids based on water or hydrocarbons. Its wide flow range, its short response time of 40...440.00€ - 700.30€ -
Fastec
Fastec HS7 High-Speed CameraFastec HS7 camera is the fastest camera from the HS series, designed for the applications where both resolution and speed are required. Using a 10-bit CMOS sensor, the new HS7 allows recording videos... -
Add to Cart Bartels Mikrotechnik
mp-advance Evaluation SetThe mp-advance Evaluation Set is the most complete bundle to use Bartels product line for a wide range of applications. The set contains 1x mp-Multiboard2 controller with 4 driver chips (Lowdriver,...2,058.00€ -
Choose Options DK Infusetek
ISPLab Touch Screen Syringe Pump (1 - 12 channels)Work easily and with the best accuracy thanks to the infusion/withdrawal ISPLab syringe pump! Its large LCD touch screen is really convenient to control the pump during your microfluidics...1,221.20€ - 2,162.80€ -
Choose Options New Era Pump Systems
NE-300 InfusionONE Syringe PumpThe New Era NE-300 InfusionOne is a basic, easy-to-use one channel infusing syringe pump. It is the most cost-effective solution to begin working with microfluidics. Flow range from 12.2 nL/min up...317.80€ -
New
Add to Cart Bartels Mikrotechnik
Liquid Low Flow Control KitThe Liquid Low Flow Control Kit is designed for precise handling of very small liquid volumes in applications where stability, accuracy and gentle fluid delivery are critical. Typical flow ranges...1,699.00€ -
Choose Options Innofluid
LabQ Compact Peristaltic PumpThe LabQ peristaltic pump is a small pump offering space-saving convenience and user-friendly use. Basic and cost-effective peristaltic pump with a 2.4 inch LCD screen display. Made in...649.50€ -
Add to Cart Zeiss
Axiocam 305 color CameraThe Axiocam 305 color high-speed camera is your best match for routine observations with the best resolution. Its 5 Megapixel CMOS sensor can acquire up to 36 frames per second at full resolution...5,600.00€ -
Add to Cart InSphero
InSphero - Akura PLUS Hanging Drop MicroplatesThis system is recommended for easy and large-scale production of 3D cell models such as spheroids, organoids and microtissues. It is based on hanging-drop technique for spheroid formation and...1,590.00€ -
Choose Options Longer
dLSP 500 Digital Syringe PumpThe dLSP 500 Series syringe pump is a high-precision system for microfluidics, allowing to control up to 2 channels simultaneously with an accuracy down to +/- 0.35%. Control and monitor the pump in...2,914.30€ - 4,285.70€ -
Choose Options Innofluid
LabK Mini Peristaltic PumpThe LabK peristaltic pump is the smallest option on the market, offering convenient space-saving design. This simple and cost-effective pump includes a 0.96" OLED display. Made from laboratory-grade...289.10€ -
Photron
FASTCAM Mini AX High-Speed CameraThe FASTCAM Mini AX are the highest performance high-speed cameras within the FASTCAM Mini series. With exceptional light sensitivity, excellent image quality and flexible region of interest (ROI),... -
Add to Cart IDEX Health & Science
10-32 Coned PEEK Fittings for NanoPort (pack of 10)These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless...92.20€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver






















































































