Skip to main content
354 Results
  • Remote Control Pump Cable - Darwin Microfluidics
    Choose Options

    Masterflex

    Remote Control Pump Cable
    A cable assembly to connect your Masterflex drive to any device. General A 7.9 m (25 ft) cable with a terminal connector and stripped wire ends. Verify the connector type on your drive before...
    283.00€ - 345.00€
  • Remote Control Pump Connector - Darwin Microfluidics
    Choose Options

    Masterflex

    Remote Control Pump Connector
    A connector to create your own cable for Masterflex drives. General A 7.9 m (25 ft) cable with a terminal connector and stripped wire ends. Verify the connector type on your drive before ordering...
    123.00€ - 149.00€
  • Four-channel Base for dLSP501 Syringe Pump - Darwin Microfluidics
    Add to Cart The item has been added

    Longer

    Four-channel Base for dLSP501 Syringe Pump
    A base to easily connect up to four dLSP501S or dLSP501L syringe units. Connect and disconnect your syringe units quickly thanks to its magnetic connection ports. This four-channel base is the ideal...
    256.40€
  • New
    Contents of the FluidCube Basic Kit with FluidCube Base, three BP7 micropumps, pump drivers, sensor, tubing and cables
    Add to Cart The item has been added

    Bartels Mikrotechnik

    FluidCube Basic Kit - Starter Set for Bartels Micropumps
    Starter set for testing BP7 Tubing micropumps from Bartels in a working setup: 3 pumps, a FluidCube Base, the three Bartels pump drivers, tubing and accessories. Includes an SLF3S-0600F flow sensor,...
    1,355.00€
  • New
    FluidCube Base controler for Bartels micropumps top view
    Add to Cart The item has been added

    Bartels Mikrotechnik

    FluidCube Base Control Board for Bartels Micropumps
    FluidCube Base is the control and communication board at the centre of the Bartels FluidCube system: an ESP32 board that runs pumps, sensors and extension boards from the Bartels FluidicStudio...
    460.00€
  • OEM Network Kit - Darwin Microfluidics
    Choose Options

    New Era Pump Systems

    OEM Network Kit
    A kit for New Era OEM pumps, including a power supply and a secondary cable for pump-to-pump connection. This kit should be used when networking two or more OEM syringe pumps to a single computer...
    12.80€
  • New
    Contents of the FluidCube Advance Kit with FluidCube Base and Switch, six BP7 micropumps, Memetis valves, sensors and accessories
    Add to Cart The item has been added

    Bartels Mikrotechnik

    FluidCube Advance Kit - Allrounder for Bartels Micropumps
    Complete FluidCube platform for Bartels micropumps: 6 BP7 - Tubing pumps, every pump driver, flow and pressure sensing, 2 active Memetis valves, a microfluidic chip and a power supply. Controlled...
    2,500.00€
  • New
    FluidCube Scale Extension Board for Bartels Micropumps top view
    Add to Cart The item has been added

    Bartels Mikrotechnik

    FluidCube Scale Extension Board for Bartels Micropumps
    FluidCube Scale is an extension board for the Bartels FluidCube system that adds pump connections, for up to 4 micropumps, and supports compatible pressure and flow sensors. Needs a FluidCube Base to...
    265.00€
  • New
    Contents of the Pressure Control Kit with FluidCube Base, BP7 micropumps, pressure sensor and FluidicStudio software
    Add to Cart The item has been added

    Bartels Mikrotechnik

    Pressure Control Kit with FluidCube for Bartels Micropumps
    Closed-loop pressure control kit that holds a defined pressure in a fluidic system using real-time sensor feedback, built around the Bartels FluidCube Base. Includes three BP7 - Tubing micropumps,...
    1,844.00€
  • New
    Contents of the Air Control Kit with FluidCube Base, BP7 micropumps, SDP810 gas flow sensor, reservoir and FluidicStudio software
    Add to Cart The item has been added

    Bartels Mikrotechnik

    Air Control Kit with FluidCube for Bartels Micropumps
    Closed-loop air flow control kit: BP7 micropumps generate the pressure and a gas flow sensor feeds back the measured flow, built around the Bartels FluidCube Base. Includes three BP7 - Tubing...
    1,876.00€
  • OEM Starter Kit - Darwin Microfluidics
    Choose Options

    New Era Pump Systems

    OEM Starter Kit
    Complete kit to control your New Era OEM pump from a computer through a RS-232 interface. Includes a power supply, pump-to-PC network cable and user manual. General A complete kit to run and control...
    25.50€
  • New
    Contents of the CO2 Monitoring Kit with FluidCube Base and Sense, BP7 micropumps and CO2 gas sensor
    Add to Cart The item has been added

    Bartels Mikrotechnik

    CO2 Monitoring Kit with FluidCube for Bartels Micropumps
    Open-loop monitoring kit for continuous, real-time readings of carbon dioxide (CO2) in the air, built around the Bartels FluidCube Base and FluidCube Sense. Includes three BP7 - Tubing micropumps,...
    1,265.00€
  • New
    Contents of the Volume Dispensing Kit with FluidCube Base, BP7 micropumps, SLF3S-1300F flow sensor and FluidicStudio software
    Add to Cart The item has been added

    Bartels Mikrotechnik

    Volume Dispensing Kit with FluidCube for Bartels Micropumps
    Volume dispensing kit that runs the pump on measured flow and stops it automatically once the target volume is reached, built around the Bartels FluidCube Base. Includes three BP7 - Tubing...
    1,976.00€
  • mp-hc Hose Clamps for Bartels micropumps (pack of 10) - Darwin Microfluidics
    Add to Cart The item has been added

    Bartels Mikrotechnik

    mp-hc Hose Clamps for Bartels Micropumps (pack of 10)
    Secure the connection between your tubing and your BP7 or mp6 micropump to prevent leakages. Pack of 10 units. General Hose clamps for Bartels BP7 and mp6 micropumps, prevent any unwanted...
    23.00€
  • New
    Contents of the VOC Monitoring Kit with FluidCube Base and Sense, BP7 micropumps and VOC gas sensor
    Add to Cart The item has been added

    Bartels Mikrotechnik

    VOC Monitoring Kit with FluidCube for Bartels Micropumps
    Open-loop monitoring kit for continuous, real-time readings of volatile organic compounds (VOC) in the air, built around the Bartels FluidCube Base and FluidCube Sense. Includes three BP7 - Tubing...
    1,265.00€
email subscription background

Get the latest updates on new products and upcoming sales

Your cart Close Close

Your cart is empty

Your setup is waiting for its first component. Pumps, flow sensors, chips, tubing and fittings: start here.

Menu Close Close
Search Close Close