-
Choose Options Masterflex
Tygon E-LFL Extension Tubing (100 ft / 30.4 m)Tygon® E-LFL tubing is the choice you can rely on when it comes to peristaltic pump applications. It offers longer tubing life compared to other Tygon® formulations, with a smooth inner bore. This tubing also has broad chemical compatibility and...246.00€ - 248.00€ -
Choose Options microfluidic ChipShop
Male Mini Luer Fluid Connectors - Twins (pack of 10)The Fluidic 332 Twin Male Mini Luer Fluid Connectors by Microfluidic ChipShop are designed to seamlessly connect your tubings to adjacent ChipShop mini Luer ports. Suitable for silicone or flexible tubing with an ID ≤ 1 mm. Sold in packs of 10 twin...19.00€ -
Choose Options Darwin Microfluidics
PFA Tubing (20 m)PFA tubing for general lab applications. Roll of 20 meters, available in various sizes. General PFA tubing is widely used in microfluidics as an alternative to PTFE. It combines the properties of PTFE and FEP, with high transparency. Various sizes...111.30€ - 160.20€ -
Choose Options Masterflex
Solva Extension Tubing (50 ft / 15.2 m)Solva™ tubing was designed to resist embrittlement and swelling due to hydrocarbon exposure, making it ideal for transporting hydrocarbons, petroleum products, and distillates. Its thermoplastic, PVC-based material and plasticizer offer a firm, stiff...80.60€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Ferrule ETFE 1/4-28 for 1.8 mm OD (pack of 10)Flangeless ferrule for 1/4-28 UNF flat-bottom ports, made to connect 1.8 mm OD tubing. Manufactured in ETFE. Available in a pack of 10 units. General Connect your 1.8 mm OD tubing to any 1/4-28 flat-bottom port. Use this ferrule together with a...19.50€ -
Choose Options Masterflex
2-Stop Tygon E-Lab (E-3603) Pump Tubing (pack of 12)Tygon® E-Lab(E-3603) tubing is an inexpensive solution for all types of general laboratory applications. Its low gas permeability ensures easy and consistent flow monitoring. Inside, a smooth, non-aging and non-oxidizing inner bore prevents build-up of...135.00€ -
Add to Cart The item has been added microfluidic ChipShop
Female Luer Flat Caps (pack of 10)These Fluidic 1231 flat caps are made to seal female Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Luer interfaces without additional height to the microfluidic system hence with a minimal footprint. Content 10x Female...19.00€ -
Add to Cart The item has been added BFlow
Male Luer to Barbed ConnectorUse this Luer lock connector to interface silicone tubing with your medium reservoir. General This male Luer Lock to barbed connector allows you to connect your silicone tubing with your medium reservoir via a needle. Sold in packs of 5, these...50.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-advance Evaluation SetThe mp-advance Evaluation Set is the most complete bundle to use Bartels product line for a wide range of applications. The set contains 1x mp-Multiboard2 controller with 4 driver chips (Lowdriver, Driver, Highdriver, and Highdriver4), 6x BP7 pumps, a...2,058.00€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 275-315 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 275 to 315 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...35.20€ -
Choose Options microfluidic ChipShop
Organ-on-a-Chip - Cross-flow membrane w/ Open Chamber- Mini LuerThis open version of Fluidic 653 Organ-on-a-Chip features two distinct culture chambers, accessible via multiple inlets and outlets, allowing co-culture of various cell types within two separate compartments divided by a permeable membrane. It has an...103.30€ -
Add to Cart The item has been added IDEX Health & Science
Fingertight Double-Wing 10-32 Coned Fitting for 1/16" OD Tubing (pack of 10)These double wing Fingertight fittings comprise a nut and a ferrule, manufactured in PEEK, for 1/16" OD tubing. Available in a pack of 10 units. General Fingertight fitting with a winged nut head to provide extra leverage when tightening it into a...92.20€ -
Choose Options New Era Pump Systems
NE-1002X SyringeONE:Microfluidics Programmable Syringe PumpThe NE-1002X SyringeONE:Microfluidics is one of the smoothest single-channel syringe pumps for microfluidics applications: in this low flow rate version, this syringe pump goes down to 0.13 pL/min with an accuracy of +/- 0.5%. The...1,703.10€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-basic Evaluation SetThe mp-basic Evaluation Set is the easiest and most efficient way to try out Bartels micropumps. It includes the mp-Multiboard2 which can be operated simply from the provided software. The set contains the following: 1x mp-Multiboard2 controller with 3...1,029.00€ -
Choose Options DK Infusetek
SPC/ZU-I Independent Syringe Pump (1-8 channels)High-precision split type syringe pump with one controller and separate syringe pumps (up to 8 units) for various lab applications from 0.01 µL/min to 127 mL/min. Embedding a 7" color LCD touch screen, the controller allows to independently program...2,762.80€ - 9,762.80€ -
Add to Cart The item has been added Micronit
Fluidic Connect Pro ETFE Connection KitA kit containing 5x ferrules for 1/16" OD tubing and 5m ETFE tubing to create a secure connection between your pump and the Fluidic Connect Pro chip holder from Micronit. General Use this kit with your Fluidic Connect Pro chip holder. The ferrules can...205.00€ -
Add to Cart The item has been added IDEX Health & Science
Super Flangeless Ferrule PEEK 10-32 for 1/16” OD (pack of 10)These Super Flangeless ferrules are made to resist high pressure when combined with 10-32 flat-bottom ports. Sold in packs of 10. General Resistant to high pressure and manufactured in PEEK, these Super Flangeless ferrules are made for 10-32 flat-bottom...215.40€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Super Flangeless Female Nut for 1/16” or 1/32” OD (pack of 10)This female 1/4-28 Super Flangeless nut connects 1/16" or 1/32" OD tubing to any male 1/4-28 fitting. Sold in packs of 10 units. General Easily adapt any tubing with these female 1/4-28 Super Flangeless nuts manufactured in PEEK. Associated with a Super...97.90€ -
Add to Cart The item has been added BFlow
Straight ConnectorThese connectors allow interfacing of silicone tubing with microfluidic chips. They are compatible with 1 mm ID tubing and 3 mm diameter punched holes. General These barbed straight connectors allow easy connection of soft-wall tubing directly with...50.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned PEEK Fittings for NanoPort (pack of 10)These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless fittings Highly inert and chemical-resistant PEEK material for a...92.20€ -
Choose Options microfluidic ChipShop
Droplet Generator with Storage Units - 74 µm nozzle Fluidic 488The Fluidic 488 Microfluidic Device by Microfluidic ChipShop integrates a droplet generator and a chamber with small traps for storing and capturing droplets, enabling further analysis. The chip is fabricated in polycarbonate (PC) or in Topas (COC) and...42.20€ -
Choose Options Masterflex
L/S Chem-Durance Bio Pump Tubing (15.2 m)Masterflex Chem-Durance Bio offers excellent chemical compatibility over a wide range of chemicals, along with long life for peristaltic pumping. Compatible with any pump heads accepting L/S tubing, 15.2 m / 50 ft per roll. General Masterflex...275.00€ - 858.00€ -
Choose Options Masterflex
L/S Tygon E-Lab (E-3603) Pump Tubing (15.2 m)Masterflex Tygon E-Lab is an economical tubing for general lab transfer applications. Compatible with any pump heads accepting L/S tubing, 15.2 m / 50 ft per roll. General Masterflex Tygon E-Lab tubing is designed for general laboratory applications. 15...74.70€ - 371.00€ -
Add to Cart The item has been added ELVEFLOW
Kit Fittings Starter Pack Push-in for OB1 Mk4Complete kit with all the fittings and connectors to get started out of the box with the Elveflow OB1 Mk4 controller. Reservoirs not included. General A toolbox kit with all the elements to connect your Elveflow OB1 Mk4 pressure controller to your...730.00€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
