-
Add to Cart The item has been added BFlow
Straight Press-in PlugClose the chips inlets/outlets with these press-in plugs to prevent evaporation or contamination of your experiment. Designed for holes of 3 mm diameter and autoclavable. General These press-in plugs have been designed to close punched holes of 3 mm...50.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Female to 1/4-28 Male AdapterThe 10-32 Female to 1/4-28 Male Adapter made in biocompatible PEEK is perfect to connect different threads. Its configuration allows to connect a 10-32 coned fitting to a 1/4-28 flat-bottom port. General This adapter allows you to connect perfectly a...34.30€ -
Add to Cart The item has been added IDEX Health & Science
Female 10-32 to Male Luer Lock Adapter (pack of 5)Create a tight connection between 10-32 and Luer threads. Manufactured in chemically inert PEEK, this adapter from female 10-32 to male Luer Lock conforms to ISO requirements for medical luer taper configurations and performances (45 psi / 3.1 bar)...107.90€ -
Choose Options ISMATEC
3-Stop Puri-Clear LL Pump Tubing (pack of 12)Puri-Clear® LL tubing offers excellent chemical resistance, optical clarity for easy fluid identification, and a high elastic memory material for efficient handling of viscous materials. It has a low gas permeability, a smooth inner bore, a high...58.20€ -
Add to Cart The item has been added IDEX Health & Science
6-40 Flat-Bottom Plugs (pack of 10)Manufactured in PEEK, these 6-40 flat-bottom plugs are perfect for closing off unused ports in valves and multi-port connectors. Sold by pack of 10 units. General Close off unused 6-40 flat-bottom ports using these plugs. Manufactured in biocompatible...63.80€ -
Add to Cart The item has been added Micronit
Ferrules 1/32" OD for Fluidic Connect Pro Chip Holder (pack of 5)A pack of 5 ferrules to connect your 1/32" OD tubing to the Fluidic Connect Pro chip holder from Micronit. General Use these ferrules to interface your 1/32" OD fluoropolymer tubing (PTFE, ETFE, PEEK, etc.) to the Fluidic Connect Pro chip holder from...119.00€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Ferrule ETFE 1/4-28 for 2.5 mm OD (pack of 10)Flangeless ferrules for 1/4-28 UNF flat-bottom ports, made to connect 2.5 mm OD tubing. Manufactured in ETFE. Available in a pack of 10 units. General Connect your 2.5 mm OD rigid or semi-rigid tubing to any 1/4-28 flat-bottom port. Use this ferrule...19.20€ -
Choose Options Masterflex
L/S Puri-Flex Pump Tubing (7.6 m)Masterflex Puri-Flex is used in pharma and bioprocess applications requiring long life and high performance. Compatible with any pump heads accepting L/S tubing, 7.6 m / 25 ft per roll. General Masterflex Puri-Flex tubing is designed for pharmaceutical...61.20€ - 172.00€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 225-265 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 225 to 265 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.80€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to 360 µm OD CapillaryThis adapter, made of PEEK, allows you to easily connect any Luer-terminated syringe to a 360 µm outer diameter tube. The assembly comes with 1x MicroFerrule F-152 and 1x MicroNut P-416 for 360 µm OD tubing. General The Luer-to-MicroTight Adapter is...85.00€ -
Add to Cart The item has been added Micronit
Fluidic Connect 4515 ETFE Connection KitA connection kit with fittings, ferrules, and ETFE tubing to create a secure connection between your pump and the Fluidic Connect 4515 chip holder from Micronit. General A kit for connecting your pump to the Fluidic Connect 4515 chip holder. The ferrules...319.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned PEEK Fittings for NanoPort (pack of 10)These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless fittings Highly inert and chemical-resistant PEEK material for a...94.20€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 630-670 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 630 to 670 µm OD tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...38.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Luer Lock Check Valve (pack of 10)One-way check valve with low cracking pressure (20 mbar) to prevent backflow and for recirculation setups. General A check valve for recirculation setup or protection of your equipment, for use in your microfluidic system. This valve is...54.00€ -
Add to Cart The item has been added ELVEFLOW
Kit Fittings Starter Pack Push-in for OB1 Mk4Complete kit with all the fittings and connectors to get started out of the box with the Elveflow OB1 Mk4 controller. These push-in fittings are compatible with the -900/6000 mbar and 8000 mbar pressure range of the OB1 Mk4 pressure controller...730.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned Union AdapterThis 10-32 coned union adapter is designed to interface two 10-32 coned fittings. Manufactured in PEEK, allowing an excellent chemical resistance. Sold by pack of 1 unit. General The 10-32 coned NanoTight union efficiently connects tubing in a...61.90€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 160-200 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 160 to 200 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.00€ -
Choose Options Innofluid
LabV3-III Intelligent Flow Rate Peristaltic PumpThis intelligent high flow rate peristaltic pump features a 4.3" LCD touch screen with several features such as calibration and dispensing mode. Made of laboratory-grade ABS, it is user-friendly and capable of achieving flow rates as low as a few...1,493.90€ - 2,185.30€ -
Choose Options ISMATEC
Viton Extension Tubing (50 ft / 15.2 m)Viton® tubing is the perfect choice for applications requiring FDA compliance, such as food or lab use. This tubing offers excellent chemical resistance, withstanding corrosives, solvents, and oils at elevated temperatures. Its low gas permeability...180.00€ - 181.00€ -
Choose Options Masterflex
L/S 2-Stop Chem-Durance Bio Pump TubingA set of 2-stop tubing for Masterflex L/S pump heads. Masterflex Chem-Durance Bio offers excellent chemical compatibility over a wide range of chemicals, along with long life for peristaltic pumping. Compatible with any pump heads accepting 2-stop L/S...159.00€ - 220.00€ -
Choose Options Longer
L300-1F Intelligent Peristaltic PumpThis precise peristaltic pump covers a wide range of laboratory applications up to 1200 mL/min. Program complex multi-step workflows from the intuitive graphic interface, and quickly set up your experiment. Various pump heads are available from 1 up to 8...2,341.70€ - 2,585.10€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 480-520 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 480 to 520 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.80€ -
Choose Options ISMATEC
Silicone (peroxide-cured) Extension Tubing (50 ft / 15.2 m)Silicone (peroxide-cured) tubing is designed for optimal strength and physical compression in a wide variety of industrial uses. Thanks to its biocompatibility and lack of additives, plasticizers, or DOP, it is odorless and non-toxic, with no taste...167.00€ - 171.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned Plugs (pack of 10)These 10-32 coned plugs made in Delrin acetal are perfect for closing off unused ports in valves and multi-port connectors. Sold by pack of 10 units. General This plug with a 10-32 coned thread port configuration is useful to close off unused ports in...13.20€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
