Skip to main content

Fluid Handling

Fluid handling is essential in microfluidics for precise control over liquids. This control can be crucial for effective analysis and testing in laboratories and research settings. Our selection of products is designed for easy installation, promoting efficient fluid mixing, sorting, and analyzing while reducing setup errors. Explore our range to enhance precision, efficiency, and reliability in your microfluidic projects. Shop now for dependable fluid solutions.
Pumps Image
Worldwide Express Shipping

Worldwide Express Shipping

Delivery in 1-2 days for products in stock

Money-Back Guarantee

Simplified Purchasing

Pay by invoice or credit card

Outstanding Support

Outstanding Support

A team of engineers and PhDs ready to help!

212 Results
  • VacuTight-Ferrule-1-4-28-1-8-OD
    Add to Cart The item has been added

    IDEX Health & Science

    VacuTight Ferrule 1/4-28 for 1/8” OD (pack of 10)
    VacuTight 1/4-28 ferrules to maintain 1/8" OD tubing through vacuum and low-pressure conditions. Sold in packs of 10 units. General VacuTight ferrules are to be combined with VacuTight nuts to strongly hold 1/16" OD rigid tubing into 1/4-28 female ports...
    19.90€
  • M Connector
    Add to Cart The item has been added

    BFlow

    M Connector
    This barbed connector can be used to link two inputs/outputs of a chip to soft-walled tubing, to avoid using two independent connectors.   General  This M connector is useful to connect two inputs/outputs of a chip to avoid using two single connectors...
    50.00€
  • 1/4-28 Female to 1/4-28 Male Flat-Bottom Adapter - Darwin Microfluidics
    Add to Cart The item has been added

    IDEX Health & Science

    1/4-28 Female to 1/4-28 Male Flat-Bottom Adapter
    1/4-28 female to 1/4-28 male flat-bottom adapter. Manufactured in PTFE. Pack of 1 unit. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 1/4-28 port. Content 1x PTFE 1/4-28 female flat-bottom to 1/4-28 male flat-bottom...
    55.00€
  • 2-Stop Chem-Durance Bio Pump Tubing (pack of 6)
    Choose Options

    ISMATEC

    2-Stop Chem-Durance Bio Pump Tubing (pack of 6)
    Chem-Durance® Bio tubing was designed specifically for advanced pumping systems, providing excellent chemical resistance and long operating life. Its low spallation rate ensures seamless pumping, while its plasticizer-free inner liner and high dielectric...
    153.00€
  • 2-Stop Silicone (peroxide-cured) Pump Tubing (pack of 6)
    Choose Options

    ISMATEC

    2-Stop Silicone (peroxide-cured) Pump Tubing (pack of 6)
    Silicone (peroxide-cured) tubing is designed for optimal strength and physical compression in a wide variety of industrial uses. Thanks to its biocompatibility and lack of additives, plasticizers, or DOP, it is odorless and non-toxic, with no taste...
    105.00€
  • 3-Stop Solva Pump Tubing (pack of 12)
    Choose Options

    ISMATEC

    3-Stop Solva Pump Tubing (pack of 12)
    Solva™ tubing was designed to resist embrittlement and swelling due to hydrocarbon exposure, making it ideal for transporting hydrocarbons, petroleum products, and distillates. Its thermoplastic, PVC-based material and plasticizer offer a firm, stiff...
    60.20€ - 62.00€
  • 3-Stop Versilon 2001 Pump Tubing (pack of 6)
    Choose Options

    ISMATEC

    3-Stop Versilon 2001 Pump Tubing (pack of 6)
    Versilon™ 2001 tubing has the best chemical resistance of any Tygon® formulation, making it suitable for many polar solvents. It doesn't contain plasticizers, and its clear nature allows for easy flow monitoring. Its low extractability and gas...
    128.00€
  • Ferrules for Sideconnect Chip Holder (pack of 5) - Darwin Microfluidics
    Add to Cart The item has been added

    Micronit

    Ferrules for Sideconnect Chip Holder (pack of 5)
    A set of 5x ferrules to connect your 1/16" OD tubing to the Sideconnect chip holder from Micronit. General Manufactured in FFKM, these ferrules offer the following advantages: Compatible with 1/16" OD tubing and Sideconnect chip...
    179.00€
  • Fingertight Ferrule 10-32 Coned for 1/16" OD Tubing (pack of 10) - Darwin Microfluidics
    Add to Cart The item has been added

    IDEX Health & Science

    Fingertight Ferrule 10-32 Coned for 1/16" OD Tubing (pack of 10)
    Fingertight ferrules in PEEK for 1/16" OD tubing. Use these ferrules with Fingertight 10-32 coned nuts. Available in a pack of 10 units. General Connect your 1/16" (1.6 mm) OD tubing to a 10-32 coned port using a Fingertight nut and this ferrule...
    64.30€
  • L/S 2-Stop Tygon E-LFL Pump Tubing - Darwin Microfluidics
    Choose Options

    Masterflex

    L/S 2-Stop Tygon E-LFL Pump Tubing
    A set of 2-stop tubing for Masterflex L/S pump heads. Masterflex Tygon E-LFL has the longest life of all Tygon formulations for peristaltic pumping. Compatible with any pump heads accepting 2-stop L/S tubing, General Masterflex Tygon E-LFL tubing offers...
    175.00€ - 215.00€
  • L/S Spooled C-Flex Pump Tubing - Darwin Microfluidics
    Choose Options

    Masterflex

    L/S Spooled C-Flex Pump Tubing
    Masterflex C-Flex combines the physical properties of silicone with the chemical compatibility of Tygon for general lab applications. Compatible with any pump heads accepting L/S tubing. General  Spool of Masterflex C-Flex tubing:...
    699.00€ - 2,240.00€
  • L/S Spooled PharMed BPT Pump Tubing - Darwin Microfluidics
    Choose Options

    Masterflex

    L/S Spooled PharMed BPT Pump Tubing
    Masterflex PharMed BPT tubing is ideal for tissue and cell applications. Biocompatible, it is opaque to UV and visible light for light-sensitive fluids. Compatible with any pump heads accepting L/S tubing, General  Spool of Masterflex PharMed BPT tubing...
    1,060.00€ - 3,420.00€
  • L/S Spooled Platinum-Cured Silicone Pump Tubing - Darwin Microfluidics
    Choose Options

    Masterflex

    L/S Spooled Platinum-Cured Silicone Pump Tubing
    Masterflex platinum-cured silicone tubing offers excellent biocompatibility for a wide range of applications using Masterflex L/S drives and pump heads. Compatible with any pump heads accepting L/S tubing. General  Spool of Masterflex platinum-cured...
    949.00€ - 2,490.00€
  • L600-1F Intelligent Peristaltic Pump
    Choose Options

    Longer

    L600-1F Intelligent Peristaltic Pump
    This precise peristaltic pump covers a wide range of laboratory applications up to 2400 mL/min. Program complex multi-step workflows from the intuitive graphic interface, and quickly set up your experiment. Various pump heads are available from 1 up to 8...
    2,734.90€ - 2,978.30€
  • LSPone Laboratory Syringe Pump
    Choose Options

    Advanced Microfluidics

    LSPone Laboratory Syringe Pump
    The Advanced Microfluidics LSPone all-in-one laboratory syringe pump is an advanced precision dosing device designed for microfluidic research applications. Its exceptional accuracy in dosing and smooth, nearly pulseless flow stream capabilities...
    4,536.10€ - 4,728.90€
  • MUX Recirculation - Darwin Microfluidics
    Add to Cart The item has been added

    ELVEFLOW

    MUX Recirculation
    The MUX Recirculation is a computer-controlled 6/2 rotative valve, ideal for easier fluid recirculation. Planning and automating long-term experiments is made easy through the dedicated Elveflow Smart Interface software. General With 6 inputs and two...
    3,410.00€
  • Super-Flangeless-Ferrule-PEEK-1-4-28-for-1-8-OD
    Add to Cart The item has been added

    IDEX Health & Science

    Super Flangeless Ferrule PEEK 1/4-28 for 1/8” OD (pack of 10)
    These Super Flangeless ferrules are adapted to 1/4-28 flat-bottom ports and 1/8” OD tubing. They resist high pressure. Sold in packs of 10 ferrules. General Manufactured in PEEK, these Super Flangeless ferrules provide high-pressure holding capability in...
    49.20€
  • Syringe Needles - Bevel Tip
    Choose Options

    BFlow

    Syringe Needles - Bevel Tip
    These sterile needles can be used for easy tubing connections with a syringe or a reservoir's septum cap.  They present a beveled tip and exist in 2 sizes: 18G and 20G. General Packs of 10 sterile needles with a beveled tip, in 18G or 20G for easy...
    10.00€
  • V6-12L AMC36 Intelligent Multichannel Peristaltic Pump
    Choose Options

    Innofluid

    V6-12L Intelligent Multichannel Peristaltic Pump
    The V6-12L intelligent industrial peristaltic pump offers 30 or 36 channels, delivering flow rates from 0.2 µL/min to 65 mL/min per channel. Available with AMC pump heads, 6 or 10 rollers. General The V6-12L peristaltic pump is a multichannel...
    3,852.90€ - 4,525.22€
  • V6-6L AMC24 Intelligent Multichannel Peristaltic Pump
    Choose Options

    Innofluid

    V6-6L Intelligent Multichannel Peristaltic Pump
    This V6-6L intelligent industrial peristaltic pump features 20 or 24 channels, with a flow rate ranging from 0.2 µL/min to 65 mL/min per channel. Available with AMC pump heads, 6 or 10 rollers. General The V6-6L peristaltic pump is a multichannel...
    3,240.46€ - 3,691.80€
Send Request Background
Contact us - category page

Got A Question?

Got a question or need a custom microfluidic solution? Our experts are here to help! Whether you're looking for prototyping, design consultation, or bulk manufacturing, we provide tailored solutions to fit your needs.

Send Request

New Products

View All
L/S Economy Modular Peristaltic Pump Drive - Darwin Microfluidics
Choose Options

Masterflex

L/S Economy Modular Peristaltic Pump Drive
The L/S® Economy Modular Drive enables convenient placement, the motor and the controller of this digital peristaltic pump drive being separated. 4 to 100 rpm and 20 to 600 rpm versions are available...
1,610.00€
L/S Economy Analog Peristaltic Pump Drive - Darwin Microfluidics
Choose Options

Masterflex

L/S Economy Analog Peristaltic Pump Drive
The L/S® Economy Analog Drive is a compact and cost-effective drive able to run up to 2 pump heads simultaneously. 7 to 200 rpm and 20 to 600 rpm versions are available. General Masterflex L/S...
1,280.00€ - 1,550.00€
Masterflex L/S Precision Process Peristaltic Pump Drive in powder-coated steel
Choose Options

Masterflex

L/S Precision Process Peristaltic Pump Drive
This precise digital drive is manufactured to handle continuous duty and washdown in the lab. It accepts most pump heads and is equipped with an open-head sensor. 1 to 100 rpm and 6 to 600 rpm...
4,030.00€ - 4,500.00€
L/S MasterSense Peristaltic Pump Drive - Darwin Microfluidics
Choose Options

Masterflex

L/S MasterSense Peristaltic Pump Drive
The L/S® MasterSense is a versatile drive with an integrated touch screen. Compact and powerful, it accepts all pump head and tubing options for high-precision fluid transfer and dispensing. 0.02 to...
4,970.00€ - 5,060.00€
L/S Standard Digital Peristaltic Pump Drive - Darwin Microfluidics
Choose Options

Masterflex

L/S Standard Digital Peristaltic Pump Drive
The L/S® Standard Digital Drive features a low-maintenance and high-accuracy motor able to run up to 4 pump heads simultaneously. 0.02 to 100 rpm and 0.1 to 600 rpm versions are available, with an...
3,670.00€ - 4,290.00€
email subscription background

Get the latest updates on new products and upcoming sales

Review Your Cart Close Close
Your cart is empty Your cart is empty Your cart is empty
Menu Close Close
Search Close Close

  • EXTENDO 944X

    EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard

  • EXTENDO 944X

    EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard

  • EXTENDO 944X

    EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard