-
Choose Options Micronit
Classic Focused Flow Droplet Generator - topconnect (pack of 3)A pack of 3 classic focused flow (or flow focusing) single-etched droplet generators in glass with topconnect interface to be used with the Micronit Fluidic Connect Pro chip holder. Available uncoated (hydrophilic) for oil-in-water or with a hydrophobic...569.00€ - 679.00€ -
Choose Options Micronit
Parallel Droplet Generator - topconnect (pack of 3)A pack of 3 parallel droplet generators in glass with topconnect interface to be used with the Micronit Fluidic Connect Pro chip holder. Scale up your droplet production with 8 nozzles on one chip! Available uncoated (hydrophilic) for oil-in-water or...779.00€ - 889.00€ -
Choose Options Micronit
Focused Flow Droplet Generator - topconnect (pack of 3)A pack of 3 focused flow (or flow focusing) droplet generators in glass with topconnect interface to be used with the Micronit Fluidic Connect Pro chip holder. Available uncoated (hydrophilic) for oil-in-water or with a hydrophobic coating for...569.00€ - 679.00€ -
Add to Cart The item has been added Micronit
Ferrules 1/16" OD for Fluidic Connect Pro Chip Holder (pack of 5)A pack of 5 ferrules to connect your 1/16" OD tubing to the Fluidic Connect Pro chip holder from Micronit. General Use these ferrules to interface your 1/16" OD stainless steel or fluoropolymer tubing (PTFE, ETFE, PEEK, etc.) to the Fluidic Connect Pro...129.00€ -
Add to Cart The item has been added Micronit
Fittings Kit for Fluidic Connect 4515 Chip HolderA kit of 6-32 fittings and ferrules to interface your 1/16" OD tubing with the Fluidic Connect 4515 chip holder from Micronit. General Use these fittings and ferrules to connect your 1/16" OD stainless steel or fluoropolymer tubing (PTFE, ETFE, PEEK, etc...229.00€ -
Add to Cart The item has been added Micronit
Ferrules 1/32" OD for Fluidic Connect Pro Chip Holder (pack of 5)A pack of 5 ferrules to connect your 1/32" OD tubing to the Fluidic Connect Pro chip holder from Micronit. General Use these ferrules to interface your 1/32" OD fluoropolymer tubing (PTFE, ETFE, PEEK, etc.) to the Fluidic Connect Pro chip holder from...119.00€ -
Choose Options Sensirion
SLI Flow Meter KitThe SLI Flow Meter Kit is meant to provide you with a complete setup, including an SLI sensor and a complete set of accessories to evaluate its performance. Monitor your flow rate using the Windows software, and export your data for further analysis...1,515.00€ -
Choose Options Sensirion
SLF3S-0600F Flow Sensor Evaluation KitThe SLF3S-0600F Evaluation Kit is meant to provide you with a complete setup, including an SLF3S-0600F sensor and a complete set of accessories to evaluate its performance. Monitor your flow rate using the Windows software, and export your data for...248.00€ -
Choose Options Sensirion
SCC1 Connection Cable for Sensirion SensorsConnect your standalone Sensirion sensor (SLQ, SLI, SLS, SLG) to your computer or any integrated system. This cable has an M8 end to connect your sensor, and USB or pigtail. General The SCC1 cable allows simple and quick readouts of Sensirion flow...107.00€ - 124.00€ -
Add to Cart The item has been added Sensirion
SLF3S-0600F Liquid Flow SensorThe SLF3S series is the new generation of Sensirion liquid flow sensors for low flow rates. With an unrivaled price-performance ratio, these sensors allow for high-precision flow measurements over a wide range of flow rates. From 0 to 2000 µL/min, the...130.00€ -
Add to Cart The item has been added Sensirion
LS32-1500 Liquid Flow SensorSensirion LS32-1500 liquid flow sensor is a high-precision solution for flow rates of up to 40 mL/min. Its wide flow range, its short response time down to 20 ms, and its compact format for easy integration make it a reliable flow sensor when versatility...860.00€ -
Sale
Choose Options Sensirion
LG16 Liquid Flow SensorSensirion LG16 liquid flow sensor is a high-precision solution to accurately measure very low flow rates of liquids based on water or hydrocarbons. Its wide flow range, its short response time of 40 ms, and sensitivity down to < 0.02 µL/min make it the...440.00€ - 670.00€ -
Add to Cart The item has been added Sensirion
SLS-1500 Liquid Flow SensorSensirion SLS liquid flow sensor is a high-precision standalone solution for flow rates of up to 40 mL/min. Its wide flow range and short response time down to 20 ms make it a reliable flow sensor when versatility in the mL/min range is required...960.00€ -
Choose Options Sensirion
SLI Liquid Flow SensorSensirion SLI liquid flow sensor is a high-precision standalone solution to accurately measure low flow rates of liquids based on water or hydrocarbons. Its wide flow range, its short response time of 40 ms, and its sensitivity down to < 1 µL/min make it...960.00€ -
Add to Cart The item has been added Longer
YZ2515X Peristaltic Pump HeadYZ2515X pump head for Longer peristaltic pumps. Based on an automatic tubing retention mechanism, this pump head allows using a wide range of tubing dimensions and formulations without stoppers. Free silicone tubing included. General The YZ2515X pump...304.00€ -
Choose Options HNP Mikrosysteme
F-MI0 Inline Filter for HNP PumpsAn inline filter with 10 µm mesh to prevent particles from damaging your HNP micro annular gear pump. Manufactured in 316L stainless steel or alloy C22, with seals in Kalrez or EPDM to ensure the widest chemical compatibility. General The F-MI0 is an...180.00€ - 603.30€ -
Choose Options IDEX Health & Science
Flangeless PEEK Fittings + ETFE Ferrules 1/4-28 to 1/8" OD (pack of 10)This 1/4-28 fittings connection kit for 1/8" OD tubing is made of PEEK nuts and ETFE ferrules to ensure its high chemical resistance. Sold by packs of 10x 1/4-28 to 1/8" OD PEEK nuts and 10x 1/8" OD ETFE ferrules. The nuts are available in standard or...68.90€ - 70.60€ -
Choose Options Darwin Microfluidics
PFA Tubing (20 m)PFA tubing for general lab applications. Roll of 20 meters, available in various sizes. General PFA tubing is widely used in microfluidics as an alternative to PTFE. It combines the properties of PTFE and FEP, with high transparency. Various sizes...113.00€ - 230.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-cv Check Valve for Bartels MicropumpsA passive check valve to prevent backflows when your Bartels BP7 or mp6 micropump is switched off. General Prevent your liquid from flowing back when your Bartels BP7 or mp6 micropump is turned off. Active valves Passive valve Takasago...42.00€ -
Choose Options Harvard Apparatus
Harvard Apparatus 11 Elite Programmable Syringe PumpThe Harvard Apparatus 11 Elite syringe pump is a precise and versatile pump for general use in microfluidics. This pump delivers a smooth flow from 1.28 pL/min to 88.28 mL/min, at an accuracy of ± 0.5%. This syringe pump can be easily controlled without...2,300.00€ - 3,675.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-hc Hose Clamps for Bartels Micropumps (pack of 10)Secure the connection between your tubing and your BP7 or mp6 micropump to prevent leakages. Pack of 10 units. General Hose clamps for Bartels BP7 and mp6 micropumps, prevent any unwanted disconnection or leakages between the pump and the tubing...21.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-f Filter for Bartels MicropumpsProtect your Bartels micropumps from dust and particles, filter porosity 20 - 60 µm. General Protect your fluidic systems from particles by connecting this filter upstream of your Bartels micropump. Dimensions: 17 x 5.5 mm Filter porosity: 20 - 60...59.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-damper for Bartels MicropumpsThe mp-damper is made to reduce pulsations in the flow generated by the Bartels BP7 and mp6 micropumps. General Get a more even flow rate by reducing its pulsatility! The mp-damper was designed to reduce the flow pulsations from the Bartels BP7 and mp6...28.00€ -
Choose Options KemLab
SQ Negative Epoxy Photoresist for MicrofluidicsSQ™ is a negative tone epoxy photoresist specifically formulated for microfluidics and PDMS molding. Sensitive to Near-UV, i-line and broadband wavelengths, it is a great alternative to SU8. SQ™ uses superior epoxies, now adapted to...129.50€ - 11,301.00€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
