-
Choose Options IDEX Health & Science
Replacement Frit for Inline Filter (pack of 5)Replacement frits for inline filters, manufactured in PCTFE and PEEK. Filter pore size of 0.5 µm or 2 µm. Sold in packs of 5 units. General A set of replacement frits in PCTFE/PEEK for inline filters. Content 5x PEEK filter 0.5 µm or 2...70.50€ - 70.90€ -
Choose Options IDEX Health & Science
Inline 10-32 FilterInline filters are used to prevent your microfluidic chip from being clogged because of particles in your liquids. These filters, manufactured in PEEK, are fully biocompatible and can be mounted directly in your flow stream. Filter pore size of 0.5 µm or...98.80€ - 99.30€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Flat-Bottom Union Adapters (pack of 5)VacuTight 10-32 flat-bottom union adapter manufactured in PEEK to connect two 10-32 flat-bottom fittings. Sold by pack of 5 units. General The 10-32 flat-bottom VacuTight union efficiently connects tubing in a microfluidic system where a dependable...99.10€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned Union AdapterThis 10-32 coned union adapter is designed to interface two 10-32 coned fittings. Manufactured in PEEK, allowing an excellent chemical resistance. Sold by pack of 1 unit. General The 10-32 coned NanoTight union efficiently connects tubing in a...60.60€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Female to 10-32 Male Flat-Bottom AdapterPEEK 1/4-28 female flat-bottom to 10-32 male flat-bottom adapter, to interface a 1/4-28 nut with a 10-32 port. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 flat-bottom port. Manufactured in PEEK for complete...33.90€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Female to 1/4-28 Male Flat-Bottom Adapter1/4-28 female to 1/4-28 male flat-bottom adapter. Manufactured in PTFE. Pack of 1 unit. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 1/4-28 port. Content 1x PTFE 1/4-28 female flat-bottom to 1/4-28 male flat-bottom...53.90€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Female Flat-Bottom to 10-32 Coned Male Adapter (pack of 5)PEEK 1/4-28 female flat-bottom to 10-32 coned male adapters are made to connect a 1/4-28 fitting in a 10-32 port. Pack of 5 units. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 coned. Manufactured in PEEK, it is...111.90€ -
Add to Cart The item has been added IDEX Health & Science
6-40 Flat-Bottom Plugs (pack of 10)Manufactured in PEEK, these 6-40 flat-bottom plugs are perfect for closing off unused ports in valves and multi-port connectors. Sold by pack of 10 units. General Close off unused 6-40 flat-bottom ports using these plugs. Manufactured in biocompatible...62.50€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Flat-Bottom Plugs (pack of 5)These 10-32 flat-bottom plugs made in Delrin acetal are perfect for closing off unused ports in valves and multi-port connectors. Sold by pack of 5 units. General This plug with a 10-32 flat-bottom thread port configuration is useful to close off unused...81.90€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Ferrule ETFE 1/4-28 for 2.5 mm OD (pack of 10)Flangeless ferrules for 1/4-28 UNF flat-bottom ports, made to connect 2.5 mm OD tubing. Manufactured in ETFE. Available in a pack of 10 units. General Connect your 2.5 mm OD rigid or semi-rigid tubing to any 1/4-28 flat-bottom port. Use this ferrule...18.80€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Ferrule ETFE 1/4-28 for 1.8 mm OD (pack of 10)Flangeless ferrule for 1/4-28 UNF flat-bottom ports, made to connect 1.8 mm OD tubing. Manufactured in ETFE. Available in a pack of 10 units. General Connect your 1.8 mm OD tubing to any 1/4-28 flat-bottom port. Use this ferrule together with a...19.50€ -
Add to Cart The item has been added IDEX Health & Science
Fingertight Ferrule 10-32 Coned for 1/16" OD Tubing (pack of 10)Fingertight ferrules in PEEK for 1/16" OD tubing. Use these ferrules with Fingertight 10-32 coned nuts. Available in a pack of 10 units. General Connect your 1/16" (1.6 mm) OD tubing to a 10-32 coned port using a Fingertight nut and this ferrule...63.00€ -
Add to Cart The item has been added IDEX Health & Science
Fingertight Double-Wing 10-32 Coned Fitting for 1/16" OD Tubing (pack of 10)These double wing Fingertight fittings comprise a nut and a ferrule, manufactured in PEEK, for 1/16" OD tubing. Available in a pack of 10 units. General Fingertight fitting with a winged nut head to provide extra leverage when tightening it into a...92.20€ -
Add to Cart The item has been added IDEX Health & Science
One-Piece Fingertight 10-32 Coned Fitting for 1/16" OD Tubing (pack of 10)One-piece fittings combine a nut and a ferrule built into one fitting, so you never lose the ferrule or stuck it in the receiving port. These Fingertight fittings manufactured in PEEK are designed to easily connect a 1/16" OD tubing to 10-32 coned ports...91.30€ -
Add to Cart The item has been added Droplet Genomics
Active Droplet Sorting Chip - PDMSThis sorting chip is designed for the high-throughput analysis and sorting of single cells in droplets. Droplets are first re-injected in one of the inlets and spaced by a flow focusing design. It is followed by an active sorting site with electrodes, to...262.00€ -
Choose Options Droplet Genomics
Co-Flow Droplet Generator - PDMSCo-flow droplet generators to generate monodisperse emulsions, with one oil inlet, two water inlets, and one outlet. 6 devices per chip, with 0.5 mm, 1 mm, or 1.2 mm punched holes to accommodate most tubing sizes. The design is declined in various nozzle...188.00€ -
Choose Options Longer
dLSP 500 Digital Syringe PumpThe dLSP 500 Series syringe pump is a high-precision system for microfluidics, allowing to control up to 2 channels simultaneously with an accuracy down to +/- 0.35%. Control and monitor the pump in real-time through an intuitive 7" touch screen, Android...2,914.30€ - 4,285.70€ -
Choose Options Droplet Genomics
Flow Focusing Droplet Generator - PDMSThese microfluidic chips are based on a flow-focusing design to generate monodisperse emulsions, with one oil inlet, one water inlet, and one outlet. 6 devices per chip, with 0.5 mm, 1 mm, or 1.2 mm punched holes to accommodate most tubing sizes. The...188.00€ -
Choose Options microfluidic ChipShop
Droplet Generator with Storage Units - 74 µm nozzle Fluidic 488The Fluidic 488 Microfluidic Device by Microfluidic ChipShop integrates a droplet generator and a chamber with small traps for storing and capturing droplets, enabling further analysis. The chip is fabricated in polycarbonate (PC) or in Topas (COC) and...42.20€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Lowdriver Pump DriverBartels mp-Lowdriver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be easily adjustable (frequency and amplitude), using the mp-Multiboard evaluation...70.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Highdriver4 Pump DriverBartels mp-Highdriver4 is a multi-pump driver capable of controlling up to four BP7 or mp6 micropumps simultaneously. Pump parameters are easily adjustable (frequency, amplitude, signal shape) using the mp-Multiboard evaluation board. General Take...196.00€ -
Choose Options IDEX Health & Science
1/4-28 Micro-Metering ValveThe Micro-Metering Valve made in PEEK is excellent for the fine control of fluid flow rates. This assembly comes with 2x flangeless 1/4-28 fittings for 1/16" OD or 1/8" OD tubing. General The standard Micro-Metering Valve allows you to precisely control...98.70€ - 102.00€ -
Choose Options IDEX Health & Science
Micro-Splitter ValveThe Micro-Splitter Valve made in PEEK has a 1/4-28 Flat-Bottom thread configuration. Included fittings accept 1/16" OD tubing. This assembly comes with 3x 1/4-28 Flangeless fittings (P-235). General The micro-splitter valve allows you to precisely split...131.20€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to 360 µm OD CapillaryThis adapter, made of PEEK, allows you to easily connect any Luer-terminated syringe to a 360 µm outer diameter tube. The assembly comes with 1x MicroFerrule F-152 and 1x MicroNut P-416 for 360 µm OD tubing. General The Luer-to-MicroTight Adapter is...83.20€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
