-
New
Add to Cart Hamilton
Dual-Syringe Holder for Hamilton Duo Syringe PumpOptional holder that carries two syringes on one drive of the Hamilton Duo Syringe Pump and moves them together at the same programmed speed. Takes two syringes of up to 25 mL each. Hamilton part number 10208930. Pump and syringes sold separately...£469.46 -
New
Choose Options Hamilton
Bubble Sensor for Hamilton Duo Syringe PumpBubble sensor that detects air in the tubing of a Hamilton Duo Syringe Pump setup and gives an early warning. Two models, for Ø2 mm or Ø3 mm tubing. Pump sold separately. General The sensor watches one liquid line and signals when a bubble...£47.40 -
New
Add to Cart Hamilton
Solenoid Valve with Pressure Sensor for Hamilton Duo Syringe PumpSolenoid valve with an integrated pressure sensor, an optional accessory for the Hamilton Duo Syringe Pump. Switches the liquid path automatically and monitors pressure in the line. Hamilton part number 10209837. Pump sold separately. General The valve...£838.32 -
New
Add to Cart Hamilton
Footswitch for Hamilton Duo Syringe PumpFootswitch that starts and stops operations of the Hamilton Duo Syringe Pump without using the touchscreen. Connects to the pump's dedicated 3.5 mm footswitch jack. Hamilton part number 10209843. Pump sold separately. General With the footswitch plugged...£53.11 -
New
Add to Cart Bartels Mikrotechnik
Pressure Driven Flow Control Kit with FluidCube for Bartels MicropumpsPressure-driven flow control kit: the micropumps pressurise a reservoir with air and a flow sensor closes the loop, built around the Bartels FluidCube Base. Includes three BP7 - Tubing micropumps, the mp-Driver, a Sensirion SLF3S-1300F flow sensor, an...£1,910.21 -
New
Add to Cart Bartels Mikrotechnik
Pressure Control Kit with FluidCube for Bartels MicropumpsClosed-loop pressure control kit that holds a defined pressure in a fluidic system using real-time sensor feedback, built around the Bartels FluidCube Base. Includes three BP7 - Tubing micropumps, the mp-Highdriver, a pressure sensor, two mp-y connectors...£1,724.14 -
New
Add to Cart Bartels Mikrotechnik
Liquid Low Flow Control Kit with FluidCube for Bartels MicropumpsClosed-loop liquid flow control kit for very low flow rates, between 5 µL/min and 2 mL/min, built around the Bartels FluidCube Base. Includes three BP7 - Tubing micropumps, the mp-Lowdriver, a Sensirion SLF3S-0600F flow sensor, an mp-damper and a...£1,852.24 -
New
Add to Cart Bartels Mikrotechnik
VOC Monitoring Kit with FluidCube for Bartels MicropumpsOpen-loop monitoring kit for continuous, real-time readings of volatile organic compounds (VOC) in the air, built around the Bartels FluidCube Base and FluidCube Sense. Includes three BP7 - Tubing micropumps, the mp-Highdriver, a VOC gas level sensor,...£1,182.78 -
New
Add to Cart Bartels Mikrotechnik
CO2 Monitoring Kit with FluidCube for Bartels MicropumpsOpen-loop monitoring kit for continuous, real-time readings of carbon dioxide (CO2) in the air, built around the Bartels FluidCube Base and FluidCube Sense. Includes three BP7 - Tubing micropumps, the mp-Highdriver, a CO2 gas level sensor, tubing and...£1,182.78 -
New
Add to Cart Bartels Mikrotechnik
Liquid High Flow Control Kit with FluidCube for Bartels MicropumpsClosed-loop liquid flow control kit for continuous flow between 100 µL/min and 40 mL/min, built around the Bartels FluidCube Base. Includes three BP7 - Tubing micropumps, the mp-Driver, a Sensirion SLF3S-1300F flow sensor, an mp-damper and a...£1,852.24 -
New
Add to Cart Bartels Mikrotechnik
Volume Dispensing Kit with FluidCube for Bartels MicropumpsVolume dispensing kit that runs the pump on measured flow and stops it automatically once the target volume is reached, built around the Bartels FluidCube Base. Includes three BP7 - Tubing micropumps, the mp-Highdriver, a Sensirion SLF3S-1300F flow...£1,847.56 -
New
Add to Cart Bartels Mikrotechnik
Air Control Kit with FluidCube for Bartels MicropumpsClosed-loop air flow control kit: BP7 micropumps generate the pressure and a gas flow sensor feeds back the measured flow, built around the Bartels FluidCube Base. Includes three BP7 - Tubing micropumps, the mp-Driver, an SDP81x gas flow sensor, a...£1,754.06 -
New
Add to Cart Hamilton
Hamilton Duo Syringe PumpBenchtop syringe pump with two independently controlled drives that infuse and withdraw at 4.97 pL/min up to 220 mL/min. Takes syringes from 0.5 µL to 50 mL, with ±0.25% accuracy and ±0.05% reproducibility. Supplied with 2...£4,128.59 -
New
Choose Options Bartels Mikrotechnik
FluidControl Plus License for Bartels FluidicStudioOptional licence for Bartels FluidicStudio that adds closed-loop control of flow rate or pressure to a FluidCube setup, based on real-time sensor feedback. Four licences, by number of control channels: 1, 3, 5 or unlimited. Delivered as a licence key,...£840.57 - £1,402.50 -
New
Choose Options Bartels Mikrotechnik
FluidCube Simple Kit - Essentials for Bartels MicropumpsEssentials to start pumping with The Bartels Pump BP7 - Tubing: 3 pumps, a FluidCube Base, Tygon tubing and 1 pump driver of your choice. Three models: with an mp-Driver, an mp-Lowdriver or an mp-Highdriver. General The Simple Kit keeps to the basics:...£712.47 - £717.15 -
New
Add to Cart Bartels Mikrotechnik
FluidCube Advance Kit - Allrounder for Bartels MicropumpsComplete FluidCube platform for Bartels micropumps: 6 BP7 - Tubing pumps, every pump driver, flow and pressure sensing, 2 active Memetis valves, a microfluidic chip and a power supply. Controlled from the FluidCube Base and its GUI, with a FluidCube...£2,337.50 -
New
Add to Cart Bartels Mikrotechnik
FluidCube Basic Kit - Starter Set for Bartels MicropumpsStarter set for testing BP7 Tubing micropumps from Bartels in a working setup: 3 pumps, a FluidCube Base, the three Bartels pump drivers, tubing and accessories. Includes an SLF3S-0600F flow sensor, a pressure sensor, an mp-damper and a syringe with...£1,266.93 -
New
Add to Cart Bartels Mikrotechnik
FluidCube Sense Extension Board for Bartels MicropumpsFluidCube Sense is an extension board for the Bartels FluidCube system that reads compatible analytical sensors, CO₂, VOC and optical, for real-time monitoring in a fluidic setup. Needs a FluidCube Base to run. Ships with a FluidCube Connection Cable...£247.78 -
New
Add to Cart Bartels Mikrotechnik
FluidCube Switch Extension Board for Bartels MicropumpsFluidCube Switch is an extension board for the Bartels FluidCube system that controls compatible valves, for fluid routing and multiplexed configurations. Needs a FluidCube Base to run. Ships with a FluidCube Connection Cable and a USB-C cable...£247.78 -
New
Add to Cart Bartels Mikrotechnik
FluidCube Scale Extension Board for Bartels MicropumpsFluidCube Scale is an extension board for the Bartels FluidCube system that adds pump connections, for up to 4 micropumps, and supports compatible pressure and flow sensors. Needs a FluidCube Base to run. Ships with a FluidCube Pump Cable and a FluidCube...£247.78 -
New
Add to Cart Bartels Mikrotechnik
FluidCube Pump Cable for Bartels MicropumpsCable that connects a compatible Bartels BP7 micropump to a FluidCube Base or FluidCube Scale board. Sold individually. General The pump cable is the link between a Bartels micropump and the FluidCube boards. Once the pump is plugged into a FluidCube...£18.70 -
New
Add to Cart Bartels Mikrotechnik
FluidCube Base Control Board for Bartels MicropumpsFluidCube Base is the control and communication board at the centre of the Bartels FluidCube system: an ESP32 board that runs pumps, sensors and extension boards from the Bartels FluidicStudio software. Ships with a FluidCube Pump Cable, a USB-C cable...£430.10 -
New
Sensific
Sensific DropletONE Sort Droplet Generation and Sorting PlatformThe Sensific DropletONE Sort is an integrated droplet generation, imaging and sorting platform that produces, analyses and sorts droplets in real time on a single benchtop instrument. Available in two configurations: DGO200 Sort with dual pressure... -
New
Sensific
Sensific DropletONE Droplet Generation and Imaging PlatformThe Sensific DropletONE is an integrated droplet generation and imaging platform that combines precision pressure control, flow sensing and real-time image analysis in a single benchtop instrument. Available in two configurations: DGO200 with dual...
Bartels Mikrotechnik
mp-Lowdriver Pump Driver























































































