Peristaltic Pump for Incubator G100-1J
- Product SKU: LG-G100-1J-YZ1515X
- Category: Peristaltic pumps, Pumps & Flow Controllers
Get the best results from your cell culture experiments with the G100-1J peristaltic pump. Thanks to its high IP rating and compact dimensions, you can work directly in the incubator and be as close as possible from your sample or microfluidic chip. No more long tubing or temperature difference between your sample and the liquid.
Flow range from 1.5 µL/min up to 380 mL/min, various pump heads available from 1 up to 8 channels.
Free silicone tubing included with each pump.
Compatible with the incubator environment
- IP65 rating: dust-proof and resistant to water or highly humid environments
- Waterproof plug and socket
- Compatible with relative humidity conditions up to 90%
- Aluminium alloy housing with anti-corrosion paint treatment
- LCD screen to display the main parameters and running status
- Easy to use: Start/Stop, Direction and Speed parameters can be controlled from a keypad
- Available with various pump heads, flow range from 1.5 µL/min to 380 mL/min (see specifications for more details)
- Programmable from a computer: RS485 interface
- Compact dimensions: 240 x 142 x 152 mm
Silicone tubing included for free with each pump.
Models & pump heads
Different pump heads are available depending on four parameters: the number of channels, the tubing used, the number of rollers and the flow range.
- YZ1515X
- YZ2515X
- DG (6 rollers)
- DG (10 rollers)
Tip: Adding rollers will allow a more accurate and less pulsatile flow, but a lower max. flow rate
More informations below.
Flow rate chart
YZ1515X
Tubing requirements: wall thickness of 1/16" (1.6 mm)
| Tubing size (ID) | Min. flow rate (0.1 rpm) | Max. flow rate (100 rpm) |
| 1/32" (0.8 mm) | 0.0063 mL/min | 6.30 mL/min |
| 1/16" (1.6 mm) | 0.0250 mL/min | 25.0 mL/min |
| 3/32" (2.4 mm) | 0.0417 mL/min | 41.67 mL/min |
| 1/8" (3.2 mm) | 0.0767 mL/min | 76.66 mL/min |
| 3/16" (4.8 mm) | 0.160 mL/min | 160.0 mL/min |
| 1/4" (6.4 mm) | 0.267 mL/min | 266.7 mL/min |
| 5/16" (7.9 mm) | 0.367 mL/min | 366.7 mL/min |
YZ2515X
Tubing requirements: wall thickness of 3/32" (2.4 mm)
| Tubing size (ID) | Min. flow rate (0.1 rpm) | Max. flow rate (100 rpm) |
| 3/16" (4.8 mm) | 0.160 mL/min | 160.0 mL/min |
| 1/4" (6.4 mm) | 0.0266 mL/min | 266.6 mL/min |
DG (6 rollers)
Tubing requirements: wall thickness between 0.8 mm and 1 mm, inner diameter between 0.13 mm and 3.17 mm
| Tubing size (ID x Wall thickness) | Min. flow rate (0.1 rpm) | Max. flow rate (100 rpm) |
| 0.5 mm x 0.8 mm | 0.002 mL/min | 2.00 mL/min |
| 1 mm x 1 mm | 0.008 mL/min | 8.00 mL/min |
| 2 mm x 1 mm | 0.028 mL/min | 28.0 mL/min |
| 2.4 mm x 0.8 mm | 0.032 mL/min | 32.0 mL/min |
| 3 mm x 1 mm | 0.048 mL/min | 48.0 mL/min |
DG (10 rollers)
Tubing requirements: wall thickness between 0.8 mm and 1 mm, inner diameter between 0.13 mm and 3.17 mm
| Tubing size (ID x Wall thickness) | Min. flow rate (0.1 rpm) | Max. flow rate (100 rpm) |
| 0.5 mm x 0.8 mm | 0.0015 mL/min | 1.50 mL/min |
| 1 mm x 1 mm | 0.006 mL/min | 6.00 mL/min |
| 2 mm x 1 mm | 0.022 mL/min | 22.0 mL/min |
| 2.4 mm x 0.8 mm | 0.024 mL/min | 24.0 mL/min |
| 3 mm x 1 mm | 0.032 mL/min | 32.0 mL/min |
Specifications
| Speed | 0 rpm -100 rpm, CW/CCW |
| Speed resolution | 0.1 rpm |
| Display | LCD |
| Control mode | Keypad, external signal control and communication control available |
| External control | Start/stop control, direction control: voltage level signal or switch signal are optional |
| Speed control | 0-5 V,0-10 V,4-20 mA,0-10 kHz are optional with uniform interface, max speed can be changed within 100 rpm |
| Communication control | RS485 interface, Longer protocol or Modbus protocol, the communication parameters (baud rate, parity, stop bit) can be set through the keypad |
| Parameter memory | Running parameters and system parameters will be saved automatically |
| Running state when power on | The running state when power on can be set as stop or as previous state |
| Prime | Fast filling or emptying at full speed |
| EMC | Complies with EMC Directive 2014/30/EU |
| Keypad lock function | Keypad can be locked to prevent the misoperation. The locking delay time can be set |
| Dimensions (L x W x H) | 235 mm x 142 mm x 152 mm |
| Power supply | AC90V-260V/20W, 50-60Hz |
| Operating temperature | 0 - 40 °C |
| Relative humidity | 10 % - 90 % |
| IP rating | IP65 |
| Weight | 3.64 kg (without pump head) |
Payment Terms
You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!
Credit card
- Add your products to the cart
- In the cart page, click on Proceed to Checkout
- Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
- That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.
Invoice
- Add your products to the cart
- In the website header, click on Request a Quote
- Fill in the required informations, then click on Submit Quote
- Our team will send you a quote shortly
- After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
- Our team will complete your purchase and send you the invoice!
If you wish to pay in USD, AUD or GBP, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.
Shipping
The shipping charges are calculated based on the weight of the package and on the country of destination. We try to offer you the best shipping rates and services, shipping all our orders through DHL Express. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination!
Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!
