-
Choose Options microfluidic ChipShop
Droplet Generator & Storage Chip - Mini Luer-1705288681The Fluidic 488 Microfluidic Device by Microfluidic ChipShop integrates a droplet generator and a chamber with small traps for storing and capturing droplets, enabling further analysis. The chip is fabricated in polycarbonate (PC) or in Topas (COC) and...42.20€ -
Choose Options Innofluid
HPM100 Low Flow Rate Peristaltic Pump for IncubatorThe new HPM100 peristaltic pump was designed to operate seamlessly at low flow rates within an incubator, allowing it to be positioned in close proximity to your sample or microfluidic chip. This pump can reach flow rates from 0.2 µL/min to 65...2,244.00€ - 2,695.50€ -
Add to Cart The item has been added IDEX Health & Science
Super Flangeless Ferrule PEEK 10-32 for 1/16” OD (pack of 10)These Super Flangeless ferrules are made to resist high pressure when combined with 10-32 flat-bottom ports. Sold in packs of 10. General Resistant to high pressure and manufactured in PEEK, these Super Flangeless ferrules are made for 10-32 flat-bottom...220.10€ -
Choose Options microfluidic ChipShop
Organ-on-a-Chip - Cross-flow membrane w/ Open Chamber- Mini LuerThis open version of Fluidic 653 Organ-on-a-Chip features two distinct culture chambers, accessible via multiple inlets and outlets, allowing co-culture of various cell types within two separate compartments divided by a permeable membrane. It has an...103.30€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Female to 10-32 Male Flat-Bottom AdapterPEEK 1/4-28 female flat-bottom to 10-32 male flat-bottom adapter, to interface a 1/4-28 nut with a 10-32 port. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 flat-bottom port. Manufactured in PEEK for complete...34.60€ -
Add to Cart The item has been added BFlow
Straight ConnectorThese connectors allow interfacing of silicone tubing with microfluidic chips. They are compatible with 1 mm ID tubing and 3 mm diameter punched holes. General These barbed straight connectors allow easy connection of soft-wall tubing directly with...50.00€ -
Add to Cart The item has been added Darwin Microfluidics
10-32 UNF to Female Luer Adapters (pack of 25)A pack of 10-32 UNF to Luer adapters in Nylon. Pack of 25 units. General 10-32 UNF to Luer adapters allow for easy interfacing between two port types. Manufactured in Nylon, these connectors can be sterilized using ethylene oxide, gamma irradiation, or...44.90€ -
Choose Options ISMATEC
3-Stop Viton Pump Tubing (pack of 12)Viton® tubing is the perfect choice for applications requiring FDA compliance, such as food or lab use. This tubing offers excellent chemical resistance, withstanding corrosives, solvents, and oils at elevated temperatures. Its low gas permeability...206.00€ -
Choose Options ISMATEC
IPC Low-Flow Multichannel Peristaltic PumpThe new version of the well-known IPC programmable peristaltic pump ensures repeatable results accross 8, 12, 16 or 24 channels at low flow rates. Its planetary gear technology ensures provides flows from 0.0004 to 45 mL/min with minimal pulsatility and...6,930.00€ - 8,350.00€ -
Choose Options Masterflex
L/S Chem-Durance Bio Pump Tubing (15.2 m)Masterflex Chem-Durance Bio offers excellent chemical compatibility over a wide range of chemicals, along with long life for peristaltic pumping. Compatible with any pump heads accepting L/S tubing, 15.2 m / 50 ft per roll. General Masterflex...268.00€ - 837.00€ -
Choose Options Darwin Microfluidics
PFA Tubing (20 m)PFA tubing for general lab applications. Roll of 20 meters, available in various sizes. General PFA tubing is widely used in microfluidics as an alternative to PTFE. It combines the properties of PTFE and FEP, with high transparency. Various sizes...113.00€ - 230.00€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to Male 10-32 Coned Adapters (pack of 5)Create a quick connection between different threads with this female luer to male 10-32 coned adapter, manufactured from natural ETFE. Sold by pack of 5 units. General Female Luer to male 10-32 coned adapter in ETFE to make a quick connection between a...31.00€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Ferrule ETFE 1/4-28 for 1.8 mm OD (pack of 10)Flangeless ferrule for 1/4-28 UNF flat-bottom ports, made to connect 1.8 mm OD tubing. Manufactured in ETFE. Available in a pack of 10 units. General Connect your 1.8 mm OD tubing to any 1/4-28 flat-bottom port. Use this ferrule together with a...19.90€ -
Add to Cart The item has been added Micronit
Fluidic Connect 4515 Stainless Steel Connection KitA connection kit with fittings, ferrules, and stainless steel tubing to create a secure connection between your pump and the Fluidic Connect 4515 chip holder from Micronit. This kit is recommended for high-pressure applications. General This kit is used...459.00€ -
Choose Options Harvard Apparatus
Harvard Apparatus 11 Pico Plus Elite Syringe PumpThe Harvard Apparatus 11 Pico Plus Elite Microfluidic programmable infusion/withdrawal syringe pump represents the best choice when your experiment requires the lowest flow and the highest accuracy. This pump is able to smoothly deliver fluid volumes all...3,786.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Female Flat-Bottom to 10-32 Coned Male Adapter (pack of 5)PEEK 1/4-28 female flat-bottom to 10-32 coned male adapters are made to connect a 1/4-28 fitting in a 10-32 port. Pack of 5 units. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 coned. Manufactured in PEEK, it is...114.40€ -
Choose Options Harvard Apparatus
11 Pico Plus Elite Pump ModuleThe Harvard Apparatus 11 Pico Plus Elite syringe pump module is compatible with Harvard Apparatus Pump Controller (HAPC) or can be used as an OEM module. It is the low-flow rate version of the 11 Elite. This syringe pump holds syringes from 0.5 µL to 60...2,715.00€ - 2,779.00€ -
Choose Options microfluidic ChipShop
Female Luer Chip Connection Ports - 90° angle (pack of 10)Fluidic 544 is a pack of female Luer connectors with a 90° angle for horizontal operation, to be fixed on microfluidic chips. Sold in packs of 10 connectors. General These female Luer ports are made for chip prototyping. They can be fixed to the chip...30.00€ -
Add to Cart The item has been added microfluidic ChipShop
Female Luer Flat Caps (pack of 10)These Fluidic 1231 flat caps are made to seal female Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Luer interfaces without additional height to the microfluidic system hence with a minimal footprint. Content 10x Female...19.00€ -
Choose Options New Era
NE-1050 SyringeONE:80 High Flow Rate Programmable Syringe PumpThe NE-1050 SyringeONE:80 is a single-channel programmable syringe pump for high flow rates. In this version, the SyringeONE:80 can generate flow rates up to 444.1 mL/min. The NE-1050 SyringeONE:80 pump is fully programmable standalone or through a...1,302.90€ -
Add to Cart The item has been added PreSens
SMA-ST AdapterThis SMA-ST Adapter is an accessory needed for some PreSens setups with SensorPlugs. It is required to connect the ST optical fiber to the SMA port on some meters. General The SMA-ST Adapter has been designed specifically to be used with...125.00€ -
Choose Options Advanced Microfluidics
SPM - Industrial OEM Low Volume Syringe PumpThis OEM sequential microdispenser is a high-precision dosing device for automated microfluidic applications. Its high-accuracy dosing and low-pulse flow stream capabilities make it the perfect tool for multiple liquid handling in the range of...2,382.90€ - 2,637.90€ -
Choose Options IDEX Health & Science
10-32 Super Flangeless Nut PEEK for 1/16" OD (pack of 10)This Super Flangeless 10-32 nut maintains 1/16" OD tubing through high pressure. Sold in packs of 10 nuts. General 10-32 Super Flangeless nuts provide the highest pressure holding capability in a flat-bottom fitting system. They are designed to interface...58.80€ - 59.20€ -
Add to Cart The item has been added ELVEFLOW
MFP Microfluidic Luer-Lock Pressure SensorThis pressure sensor can measure the pressure of fluids up to 16 bar with high precision. It is possible to place the inline sensor anywhere in your setup with no dead volume. General This flow-through sensor is perfect for both gases and liquids and can...1,399.00€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
