-
Choose Options microfluidic ChipShop
Female Luer Chip Connection Ports - 90° angle (pack of 10)Fluidic 544 is a pack of female Luer connectors with a 90° angle for horizontal operation, to be fixed on microfluidic chips. Sold in packs of 10 connectors. General These female Luer ports are made for chip prototyping. They can be fixed to the chip...30.00€ -
Add to Cart The item has been added microfluidic ChipShop
Female Luer Flat Caps (pack of 10)These Fluidic 1231 flat caps are made to seal female Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Luer interfaces without additional height to the microfluidic system hence with a minimal footprint. Content 10x Female...19.00€ -
Choose Options Little Things Factory
T-26 Multi-size Droplet Generator - Glass ChipMicrofluidic droplet generators are useful tools for generating highly reproducible micro-sized droplets. These chips ensure single droplet production in a wide size range with high precision and accuracy. Glass chips are hydrophilic, making it easy to...130.00€ - 395.00€ -
Add to Cart The item has been added microfluidic ChipShop
ChipShop 1/16“ OD Capillary PEEK TubingThis 1/16“ OD PEEK tubing from ChipShop is used to interface their microfluidic chips. General This capillary PEEK tubing is suited for various applications to interface ChipShop chips. It can be used with Tube Tuck connectors. Capillary PEEK...34.30€ -
Add to Cart The item has been added PreSens
SMA-ST AdapterThis SMA-ST Adapter is an accessory needed for some PreSens setups with SensorPlugs. It is required to connect the ST optical fiber to the SMA port on some meters. General The SMA-ST Adapter has been designed specifically to be used with...125.00€ -
Add to Cart The item has been added ELVEFLOW
MFP Microfluidic Luer-Lock Pressure SensorThis pressure sensor can measure the pressure of fluids up to 16 bar with high precision. It is possible to place the inline sensor anywhere in your setup with no dead volume. General This flow-through sensor is perfect for both gases and liquids and can...1,399.00€ -
Choose Options HNP Mikrosysteme
mzr-4622X1 Micro Annular Gear Pump with Controllermzr-4622X1 micro annular gear pump from HNP Mikrosysteme generates low pulsation, high precision flow from 120 µL/min to 72 mL/min (minimum dispensing of 2 µL). The integrated motion controller allows to precisely control the pump and program complex...2,175.20€ - 2,651.50€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 125-165 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 125 to 165 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.00€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 400-440 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 400 to 440 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.00€ -
Add to Cart The item has been added BFlow
Straight Press-in PlugClose the chips inlets/outlets with these press-in plugs to prevent evaporation or contamination of your experiment. Designed for holes of 3 mm diameter and autoclavable. General These press-in plugs have been designed to close punched holes of 3 mm...50.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Female to 1/4-28 Male AdapterThe 10-32 Female to 1/4-28 Male Adapter made in biocompatible PEEK is perfect to connect different threads. Its configuration allows to connect a 10-32 coned fitting to a 1/4-28 flat-bottom port. General This adapter allows you to connect perfectly a...34.30€ -
Add to Cart The item has been added IDEX Health & Science
Female 10-32 to Male Luer Lock Adapter (pack of 5)Create a tight connection between 10-32 and Luer threads. Manufactured in chemically inert PEEK, this adapter from female 10-32 to male Luer Lock conforms to ISO requirements for medical luer taper configurations and performances (45 psi / 3.1 bar)...107.90€ -
Choose Options Micronit
Serpentine Microreactor - topconnect (pack of 3)A pack of 3 serpentine microreactors in glass with topconnect interface to be used with the Micronit Fluidic Connect Pro chip holder. Internal volume of 0.3 µL, 1.86 µL, or 15.2 µL. General Serpentine-shaped microreactors are frequently...359.00€ - 519.00€ -
Add to Cart The item has been added IDEX Health & Science
6-40 Flat-Bottom Plugs (pack of 10)Manufactured in PEEK, these 6-40 flat-bottom plugs are perfect for closing off unused ports in valves and multi-port connectors. Sold by pack of 10 units. General Close off unused 6-40 flat-bottom ports using these plugs. Manufactured in biocompatible...63.80€ -
Add to Cart The item has been added Micronit
Ferrules 1/32" OD for Fluidic Connect Pro Chip Holder (pack of 5)A pack of 5 ferrules to connect your 1/32" OD tubing to the Fluidic Connect Pro chip holder from Micronit. General Use these ferrules to interface your 1/32" OD fluoropolymer tubing (PTFE, ETFE, PEEK, etc.) to the Fluidic Connect Pro chip holder from...119.00€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Ferrule ETFE 1/4-28 for 2.5 mm OD (pack of 10)Flangeless ferrules for 1/4-28 UNF flat-bottom ports, made to connect 2.5 mm OD tubing. Manufactured in ETFE. Available in a pack of 10 units. General Connect your 2.5 mm OD rigid or semi-rigid tubing to any 1/4-28 flat-bottom port. Use this ferrule...19.20€ -
Choose Options Masterflex
L/S Puri-Flex Pump Tubing (7.6 m)Masterflex Puri-Flex is used in pharma and bioprocess applications requiring long life and high performance. Compatible with any pump heads accepting L/S tubing, 7.6 m / 25 ft per roll. General Masterflex Puri-Flex tubing is designed for pharmaceutical...61.20€ - 172.00€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 225-265 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 225 to 265 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.80€ -
Choose Options ISMATEC
Reglo Digital Multichannel Peristaltic PumpThe NEW Reglo Peristaltic Pumps deliver the technical precision that is synonymous with Masterflex® and Ismatec® combined to form the first highly accurate, low-flow (from 0.0001 up to 68 mL/min), MasterflexLive®-enabled, and 21 CFR Part 11 and EU Annex...3,800.00€ - 4,190.00€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to 360 µm OD CapillaryThis adapter, made of PEEK, allows you to easily connect any Luer-terminated syringe to a 360 µm outer diameter tube. The assembly comes with 1x MicroFerrule F-152 and 1x MicroNut P-416 for 360 µm OD tubing. General The Luer-to-MicroTight Adapter is...85.00€ -
Add to Cart The item has been added Micronit
Fluidic Connect 4515 ETFE Connection KitA connection kit with fittings, ferrules, and ETFE tubing to create a secure connection between your pump and the Fluidic Connect 4515 chip holder from Micronit. General A kit for connecting your pump to the Fluidic Connect 4515 chip holder. The ferrules...319.00€ -
Choose Options HNP Mikrosysteme
mzr-2921X1 Micro Annular Gear Pump with Controllermzr-2921X1 micro annular gear pump from HNP Mikrosysteme generates low pulsation, high precision flow from 30 µL/min to 18 mL/min (minimum dispensing of 0.5 µL). The integrated motion controller allows to precisely control the pump and program complex...1,867.10€ - 2,182.30€ -
Add to Cart The item has been added Eden Tech
Olive Connector KitFlexdym devices can be connected to microfluidic syringes or pressure pumps through olive connectors, which are provided in the kit. Each kit contains 10 sets of olives and 50 cytotoxicity-tested o-ring stickers. The compact design of the olive...35.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned PEEK Fittings for NanoPort (pack of 10)These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless fittings Highly inert and chemical-resistant PEEK material for a...94.20€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
