-
Choose Options New Era Pump Systems
NE-1010 SyringeONE:100 High Pressure Programmable Syringe PumpThe NE-1010 SyringeONE:100 is a single-channel programmable syringe pump for a wide range of applications. In this High-Pressure version, the SyringeONE:100 has a stronger motor than the standard SyringeONE, which can generate flow...1,004.30€ -
Choose Options microfluidic ChipShop
Sheath Flow Particle & Cell Sorting Chip - Long Channels - Mini LuerThe Fluidic 283 Chip by Microfluidic ChipShop is designed for particle and cell sorting using a sheath flow on the sample stream, as well as for droplet generation and LNP generation. Available in PMMA or COP (Zeonor). General ChipShop chips are...42.20€ -
Add to Cart The item has been added IDEX Health & Science
VacuTight Ferrule 1/4-28 for 1/16” OD (pack of 10)VacuTight 1/4-28 ferrules to maintain 1/16" OD tubing through vacuum and low-pressure conditions. Sold in packs of 10 ferrules. General These VacuTight ferrules are to be combined with VacuTight nuts to strongly hold 1/16" OD rigid tubing into 1/4-28...19.20€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Driver Pump DriverBartels mp-Driver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard2...67.00€ -
Add to Cart The item has been added New Era Pump Systems
Dual Plumbing KitA kit for dual New Era pumping systems containing everything you need to set up advanced workflows. General The Dual Plumbing Kit contains everything you need to create complex dual pumping systems using New Era pumps, like continuous infusion. Comes...22.60€ -
Add to Cart The item has been added microfluidic ChipShop
Female Mini Luer Caps (pack of 10)These Fluidic 1262 caps preserve female Mini Luer interfaces from evaporation and contamination. Sold in packs of 10 caps. General These polypropylene (PP) caps allow sealing Mini Luer interfaces with a small footprint. Their shape eases handling and...19.00€ -
Add to Cart The item has been added microfluidic ChipShop
Pipetting Interface Plugs (pack of 10)The Fluidic 1225 Pipetting Interface Plugs by Microfluidic ChipShop are specifically designed to block unused ports on the new ChipShop pipette interface chips. Sold in packs of 10 plugs. General Block your female pipette interfaces on ChipShop chips...19.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Fittings Male Luer Lock Adapter KitEasily connect male ¼"-28 threaded fittings with Luer Lock elements using these ETFE male Luer Lock adapters. General Create a secure and reliable connection between a female Luer or Luer Lock port and a male 1/4-28 fitting. Manufactured in ETFE...129.00€ -
Choose Options Bürkert
2/2 Way NC Whisper Valve Type 6724Bürkert Whisper normally closed valve 6724 2/2 NC combines high chemical resistance, very fast and silent switching (3 ms at 30 dB(A)) and high back pressure tightness in a compact design of only 8.9 mm width. This valve is either available...78.90€ - 131.00€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Ferrule ETFE 1/4"-28 for 2mm OD (pack of 10)Reusable ferrules manufactured in Tefzel (ETFE) for high chemical compatibility with solvents. Compatible with 1/4-28 UNF Flangeless fittings. These flangeless ferrules are excellent for connecting most rigid or semi-rigid tubes, including tubing...19.20€ -
Choose Options Bartels Mikrotechnik
SLF3x Liquid Flow Sensor for Bartels MicropumpsSensirion SLF3S-0600F and SLF3S-1300F liquid flow sensors are natively integrated with the Bartels environment. Just connect the sensor to the Multiboard2, and start monitoring your flow rate easily! Available in different versions according to the flow...238.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
Honeywell ABP Pressure Sensor for Bartels MicropumpsHoneywell ABP digital pressure sensor with cable for Bartels Multiboard2. Pressure range from 0 to 15 psi (0 to 1 bar), accuracy of 0.25% (see documentation). General Honeywell ABP series are piezoelectric silicone pressure sensors offering enhanced...120.00€ -
Choose Options Sensirion
SLF3S-0600F Flow Sensor Evaluation KitThe SLF3S-0600F Evaluation Kit is meant to provide you with a complete setup, including an SLF3S-0600F sensor and a complete set of accessories to evaluate its performance. Monitor your flow rate using the Windows software, and export your data for...248.00€ -
Choose Options IDEX Health & Science
1/4-28 Elbow UnionThis PEEK elbow connector is designed to be used in tight corners. Pack of 1 elbow connector with 2x flangeless PEEK fittings for 1/16" OD or 1/8" OD tubing. General Elbow connectors manufactured in biocompatible PEEK, resistant to a wide range of common...77.40€ -
Choose Options New Era Pump Systems
SyringeONE OEM Syringe PumpThe OEM version of the SyringeONE pump. Without its built-in user interface, this single-channel pump is more compact than its standard version while keeping the same performances. Various options available for low flow rates or high pressure, with...564.60€ - 1,221.40€ -
Add to Cart The item has been added Micronit
Fittings Kit for Fluidic Connect 4515 Chip HolderA kit of 6-32 fittings and ferrules to interface your 1/16" OD tubing with the Fluidic Connect 4515 chip holder from Micronit. General Use these fittings and ferrules to connect your 1/16" OD stainless steel or fluoropolymer tubing (PTFE, ETFE, PEEK, etc...229.00€ -
Add to Cart The item has been added ELVEFLOW
PDMS Microfluidic Chip Cutting Mat KitThe perfect tool for any precise PDMS cutting/drilling work. General A simple cutting mat for general lab use when manufacturing PDMS chips. Drilling tubing connection holes in PDMS devices. Cutting PDMS chips to the desired dimensions...35.00€ -
Choose Options Advanced Microfluidics
RVM - OEM Distribution Microfluidic Rotary ValveThe RVM microfluidics distribution rotary valve is a precise OEM low-pressure electric rotary valve designed for automated microfluidic applications. The RVM microfluidics rotary valve series, renowned for its small channels and ultra-precise positioning...962.80€ - 1,216.60€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to Female 10-32 Coned Adapters (pack of 5)ETFE adapter with female Luer to female 10-32 coned threads for general lab use. Sold by pack of 5 units. General Luer adapters are designed to create quick connections between standard threads. This adapter has a female Luer to female 10-32 coned thread...30.60€ -
Choose Options Emulseo
FluoSurf-O Nonionic Surfactant in Fluorinated OilFluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with pH or temperature variations, allowing the production of...220.00€ - 2,454.00€ -
Add to Cart The item has been added Advanced Microfluidics
Advanced Microfluidics Connectors and Tubing KitA kit of connectors and tubing for Advanced Microfluidics devices. Includes 12x flat-bottom fittings (nut + ferrule), and 1.5 m of 1/16" OD x 0.5 mm ID PTFE tubing. General Designed for optimal use with Advanced Microfluidics instruments, this kit...214.80€ -
Choose Options ISMATEC
Reglo ICC (Independent Channel Control) PumpControl independently the direction and speed of up to four independent channels using the Reglo ICC peristaltic pump, each with its own program: start, stop, dispense, reverse, aspirate, and calibrate. The independent channel calibration ensures high...3,450.00€ - 5,570.00€ -
Choose Options microfluidic ChipShop
Spheroid Chip - Mini LuerThe spheroid chip Fluidic 1407 manufactured by ChipShop can be used for the separation of pre-cultivated spheroids or the formation of spheroids and their cultivation as well as their imaging on-chip. The inlets and outlets with integrated mini Luer...42.20€ -
Choose Options microfluidic ChipShop
Droplet Generator & Storage Chip - Mini LuerThe Fluidic 719 Droplet Generator Chip by Microfluidic ChipShop features a droplet production unit and a patterned storage channel for individual droplet collection and optical microscopic observation. Made in Topas (COC, cyclic olefin copolymer) or...42.20€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
