mp-Driver Pump Driver
Bartels mp-Driver controller is a compact pump driver for mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard2 evaluation board.
General
The mp-Driver is a small, easy-to-use driving circuit developed for the micropumps of the mp6 series. It is recommended for pumping highly viscous media, or for precise dosing.
Integrate the mp-Driver in your own system, or control your pump parameters using the mp-Multiboard2 with its dedicated Windows software! Not compatible with the mp-Multiboard.
- Compatible controller: Multiboard2
- Tunable parameters:
- Amplitude: 85 - 250 Vpp
- Frequency: 25 - 226 Hz
Content
1x mp-Driver for Multiboard2
Specifications
| Dimensions | 10.5 x 20.5 x 6 mm |
| Compatible controller | mp-Multiboard2 (I2C interface) |
| Power supply | 2.5 - 5.5 VDC (5 V recommended for optimized performance) |
| Current consumption | avg. 30 mA at 5 V |
| Pin arrangement | DIL 14; horizontal 2.54 mm, vertical 7.62 mm |
| Amplitude range | 85 - 250 Vpp |
| Frequency range | 25 - 226 Hz |
| Signal form | similar to rectangular |
Frequencies up to 1000 Hz are possible; please note that the amplitude will decrease in that case. Frequencies down to 1 Hz are possible with an external clock generator.
Documentation
Find more information and documentation here.
Bartels mp-Driver controller is a compact pump driver for mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard2 evaluation board.
General
The mp-Driver is a small, easy-to-use driving circuit developed for the micropumps of the mp6 series. It is recommended for pumping highly viscous media, or for precise dosing.
Integrate the mp-Driver in your own system, or control your pump parameters using the mp-Multiboard2 with its dedicated Windows software! Not compatible with the mp-Multiboard.
- Compatible controller: Multiboard2
- Tunable parameters:
- Amplitude: 85 - 250 Vpp
- Frequency: 25 - 226 Hz
Content
1x mp-Driver for Multiboard2
Specifications
| Dimensions | 10.5 x 20.5 x 6 mm |
| Compatible controller | mp-Multiboard2 (I2C interface) |
| Power supply | 2.5 - 5.5 VDC (5 V recommended for optimized performance) |
| Current consumption | avg. 30 mA at 5 V |
| Pin arrangement | DIL 14; horizontal 2.54 mm, vertical 7.62 mm |
| Amplitude range | 85 - 250 Vpp |
| Frequency range | 25 - 226 Hz |
| Signal form | similar to rectangular |
Frequencies up to 1000 Hz are possible; please note that the amplitude will decrease in that case. Frequencies down to 1 Hz are possible with an external clock generator.
Documentation
Find more information and documentation here.