-
Choose Options Masterflex
2-Stop Tygon E-Lab (E-3603) Pump Tubing (pack of 12)Tygon® E-Lab(E-3603) tubing is an inexpensive solution for all types of general laboratory applications. Its low gas permeability ensures easy and consistent flow monitoring. Inside, a smooth, non-aging and non-oxidizing inner bore prevents build-up of...135.00€ -
Add to Cart The item has been added microfluidic ChipShop
Female Luer Flat Caps (pack of 10)These Fluidic 1231 flat caps are made to seal female Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Luer interfaces without additional height to the microfluidic system hence with a minimal footprint. Content 10x Female...19.00€ -
Choose Options Masterflex
Solva Extension Tubing (50 ft / 15.2 m)Solva™ tubing was designed to resist embrittlement and swelling due to hydrocarbon exposure, making it ideal for transporting hydrocarbons, petroleum products, and distillates. Its thermoplastic, PVC-based material and plasticizer offer a firm, stiff...80.60€ -
Add to Cart The item has been added IDEX Health & Science
Fingertight Double-Wing 10-32 Coned Fitting for 1/16" OD Tubing (pack of 10)These double wing Fingertight fittings comprise a nut and a ferrule, manufactured in PEEK, for 1/16" OD tubing. Available in a pack of 10 units. General Fingertight fitting with a winged nut head to provide extra leverage when tightening it into a...92.20€ -
Choose Options Masterflex
L/S Chem-Durance Bio Pump Tubing (15.2 m)Masterflex Chem-Durance Bio offers excellent chemical compatibility over a wide range of chemicals, along with long life for peristaltic pumping. Compatible with any pump heads accepting L/S tubing, 15.2 m / 50 ft per roll. General Masterflex...275.00€ - 858.00€ -
Add to Cart The item has been added BFlow
Male Luer to Barbed ConnectorUse this Luer lock connector to interface silicone tubing with your medium reservoir. General This male Luer Lock to barbed connector allows you to connect your silicone tubing with your medium reservoir via a needle. Sold in packs of 5, these...50.00€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 275-315 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 275 to 315 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...35.20€ -
Choose Options Masterflex
L/S Tygon E-Lab (E-3603) Pump Tubing (15.2 m)Masterflex Tygon E-Lab is an economical tubing for general lab transfer applications. Compatible with any pump heads accepting L/S tubing, 15.2 m / 50 ft per roll. General Masterflex Tygon E-Lab tubing is designed for general laboratory applications. 15...74.70€ - 371.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned PEEK Fittings for NanoPort (pack of 10)These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless fittings Highly inert and chemical-resistant PEEK material for a...92.20€ -
Add to Cart The item has been added Darwin Microfluidics
10-32 UNF to Female Luer Adapters (pack of 25)A pack of 10-32 UNF to Luer adapters in Nylon. Pack of 25 units. General 10-32 UNF to Luer adapters allow for easy interfacing between two port types. Manufactured in Nylon, these connectors can be sterilized using ethylene oxide, gamma irradiation, or...44.90€ -
Add to Cart The item has been added microfluidic ChipShop
ChipShop 1/16“ OD Capillary PEEK TubingThis 1/16“ OD PEEK tubing from ChipShop is used to interface their microfluidic chips. General This capillary PEEK tubing is suited for various applications to interface ChipShop chips. It can be used with Tube Tuck connectors. Capillary PEEK...34.30€ -
Add to Cart The item has been added Micronit
Fluidic Connect Pro ETFE Connection KitA kit containing 5x ferrules for 1/16" OD tubing and 5m ETFE tubing to create a secure connection between your pump and the Fluidic Connect Pro chip holder from Micronit. General Use this kit with your Fluidic Connect Pro chip holder. The ferrules can...205.00€ -
Add to Cart The item has been added IDEX Health & Science
Super Flangeless Ferrule PEEK 10-32 for 1/16” OD (pack of 10)These Super Flangeless ferrules are made to resist high pressure when combined with 10-32 flat-bottom ports. Sold in packs of 10. General Resistant to high pressure and manufactured in PEEK, these Super Flangeless ferrules are made for 10-32 flat-bottom...215.40€ -
Add to Cart The item has been added ELVEFLOW
Kit Fittings Starter Pack Push-in for OB1 Mk4Complete kit with all the fittings and connectors to get started out of the box with the Elveflow OB1 Mk4 controller. Reservoirs not included. General A toolbox kit with all the elements to connect your Elveflow OB1 Mk4 pressure controller to your...730.00€ -
Add to Cart The item has been added BFlow
Straight ConnectorThese connectors allow interfacing of silicone tubing with microfluidic chips. They are compatible with 1 mm ID tubing and 3 mm diameter punched holes. General These barbed straight connectors allow easy connection of soft-wall tubing directly with...50.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Super Flangeless Female Nut for 1/16” or 1/32” OD (pack of 10)This female 1/4-28 Super Flangeless nut connects 1/16" or 1/32" OD tubing to any male 1/4-28 fitting. Sold in packs of 10 units. General Easily adapt any tubing with these female 1/4-28 Super Flangeless nuts manufactured in PEEK. Associated with a Super...97.90€ -
Choose Options IDEX Health & Science
10-32 Super Flangeless Nut PEEK for 1/16" OD (pack of 10)This Super Flangeless 10-32 nut maintains 1/16" OD tubing through high pressure. Sold in packs of 10 nuts. General 10-32 Super Flangeless nuts provide the highest pressure holding capability in a flat-bottom fitting system. They are designed to interface...57.60€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to 360 µm OD CapillaryThis adapter, made of PEEK, allows you to easily connect any Luer-terminated syringe to a 360 µm outer diameter tube. The assembly comes with 1x MicroFerrule F-152 and 1x MicroNut P-416 for 360 µm OD tubing. General The Luer-to-MicroTight Adapter is...83.20€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 555-595 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 555 to 595 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.10€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to Male 10-32 Coned Adapters (pack of 5)Create a quick connection between different threads with this female luer to male 10-32 coned adapter, manufactured from natural ETFE. Sold by pack of 5 units. General Female Luer to male 10-32 coned adapter in ETFE to make a quick connection between a...30.30€ -
Add to Cart The item has been added BFlow
Straight Press-in PlugClose the chips inlets/outlets with these press-in plugs to prevent evaporation or contamination of your experiment. Designed for holes of 3 mm diameter and autoclavable. General These press-in plugs have been designed to close punched holes of 3 mm...50.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Female Flat-Bottom to 10-32 Coned Male Adapter (pack of 5)PEEK 1/4-28 female flat-bottom to 10-32 coned male adapters are made to connect a 1/4-28 fitting in a 10-32 port. Pack of 5 units. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 coned. Manufactured in PEEK, it is...111.90€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 400-440 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 400 to 440 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...35.20€ -
Choose Options ISMATEC
IPC Low-Flow Multichannel Peristaltic PumpThe new version of the well-known IPC programmable peristaltic pump ensures repeatable results accross 8, 12, 16 or 24 channels at low flow rates. Its planetary gear technology ensures provides flows from 0.0004 to 45 mL/min with minimal pulsatility and...7,140.00€ - 8,610.00€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
