-
Choose Options IDEX Health & Science
Replacement Frit for Inline Filter (pack of 5)Replacement frits for inline filters, manufactured in PCTFE and PEEK. Filter pore size of 0.5 µm or 2 µm. Sold in packs of 5 units. General A set of replacement frits in PCTFE/PEEK for inline filters. Content 5x PEEK filter 0.5 µm or 2...70.50€ - 70.90€ -
Choose Options Darwin Microfluidics
Barbed Check ValveOne-way barbed check valves with very low unlock pressure (< 20 mbar / 0.3 psi) to prevent backflow and support recirculation setups. General These check valves are designed for recirculation setups or equipment protection in microfluidic systems...10.60€ - 19.80€ -
Choose Options microfluidic ChipShop
Small Storage Box for ChipShop Microfluidic ChipsThese storage boxes are designed to keep your microfluidic chips safe. They hold chips in the format of microscopy slides (25.5 mm x 75.5 mm). Different colors of boxes are available to store 5 to 10 chips. General These boxes by ChipShop are made to...17.10€ -
Choose Options IDEX Health & Science
1/4-28 x 10-32 Inline Check ValveThese 1/4-28 x 10-32 non-metallic check valves provide excellent protection against backflows. Broad chemical resistance and biocompatibility are guaranteed by the PEEK polymer and fluoroelastomer construction. The low cracking pressure (0.07 bar) is...179.70€ - 336.60€ -
Add to Cart The item has been added IDEX Health & Science
Inline Cartridge Check ValvePrevent backflows in your flow stream with this inline cartridge check valve. Mounted downstream a sensitive instrument, it ensures that your liquid flows in one direction only. 1/4-28 flat-bottom connection ports. Pack of 1 unit. General Limit your flow...159.30€ -
Add to Cart The item has been added Bartels Mikrotechnik
Reservoir Bundle for Bartels MicropumpsA kit with a reservoir and accessories to perform direct flow or pressure-driven flow control using Bartels BP7 or mp6 micropumps. General This bundle contains the components for direct flow and pressure-driven flow applications. It can also be used as a...54.00€ -
Choose Options microfluidic ChipShop
4.5 mL Interaction Tanks (pack of 10)4.5 mL interaction tanks to be used with ChipShop open membrane chips and store liquids. Available with or without mini Luer caps. Sold in packs of 10. General With their specially designed interface, these 4.5 mL tanks connect to ChipShop open membrane...25.00€ - 35.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic High Pressure Reservoir 150 mLA pressure-proofed reservoir for high-pressure microfluidic applications up to 8 bar. Manufactured in PTFE, the cap ensures a secured connection between the glass bottle and your microfluidic downstream system with 2x 1/4-28 UNF connection...499.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-mol Molex Connector for Bartels Micropumps (pack of 10)Molex connectors for custom-made cabling of Bartels BP7 and mp6 micropumps. Pack of 10 units. General Connect any BP7 or mp6 micropump to your control board with these Molex connectors. Content 10x mp-mol Molex...13.50€ -
Add to Cart The item has been added IDEX Health & Science
Manifold 7 Ports 10-32 Coned PEEK for 1/16" ODA manifold to merge or split up to 6 flows coming from 1/16" OD tubing. General Combine different fluids into one or split one stream into several with this PEEK manifold. For easy handling, it already comes with fittings for 1/16" OD rigid tubing...182.40€ -
Add to Cart The item has been added microfluidic ChipShop
Manual Rotary Valve ActuatorThis actuator allows to manually switch pathways on the microfluidics ChipShop rotary valve chip Fluidic 155. General Use this actuator to manually switch from one pathway to another on the Fluidic 155 ChipShop rotary valve chip. The actuator is made of...36.50€ -
Add to Cart The item has been added microfluidic ChipShop
Tank with Luer interface - 4.5 ml volume Fluidic 232The Tank with Luer interface - 4.5 ml volume - Fluidic 232 is a larger tank built for liquid storage up to 4.5 ml per individual unit. It features selectable volume, robust single-channel operation, and allows easy interfacing with standard lab...35.00€ -
Choose Options Emulseo
FluoSurf-S Nonionic Surfactant in Fluorinated OilFluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with pH or temperature variations, allowing the production of...218.00€ - 2,430.00€ -
Choose Options Innofluid
Fluid Pulse Damper - ChemistrySpecifically designed for peristaltic pumps, this damper reduces flow pulsation in microfluidic systems. Available for different tubing sizes, this industrial damper is suitable for chemistry and corrosive liquids. General Use this damper to smooth out...56.60€ - 136.20€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Air Pressure Source Cleaner KitA particle and water filter for any pressure source. General Prevent debris, particulates, and water coming from your pressure source (compressor, air line, etc…) from entering the pressure supply inlet of your OB1 pressure controller...181.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp6-con Connection Cable for Bartels LabtronixConnection cable to connect BP7 and mp6-series to mp-Labtronix. General Connect any BP7 or mp6 micropump to your mp-Labtronix Controller with this cable. Content 1x mp6-con connection cable for Labtronix Specifications Connector 1 Molex FCC 39532045 1...17.50€ -
Add to Cart The item has been added Bartels Mikrotechnik
Accessories Bundle for Bartels MicropumpsA kit with all accessories to start with Bartels BP7 or mp6 micropumps. General This bundle contains the most popular microfluidic accessories for a number of different applications with Bartels BP7 and mp6 micropumps. It includes Tygon and silicone...50.00€ -
Choose Options Masterflex
Microbore Tubing Straight Connectors (pack of 2)Create a leak-free seal between your microbore pump tubing and extension tubing. Available for most Ismatec microbore tubing sizes from 0.13 mm up to 0.89 mm. Pack of 2 units. General These straight connectors are designed to ensure a secure connection...110.00€ -
Choose Options IDEX Health & Science
Inline Degassing ChamberThis inline degassing chamber removes bubbles from your microfluidic systems. Compatible with aqueous and organic fluids, it can eliminate air bubbles in flows ranging from 0.4 to 4 mL/min. Pack of 1 unit, available in different chamber sizes...486.00€ - 1,029.40€ -
Add to Cart The item has been added BFlow
Open Jaw Slide ClampEasily stop the flow by sliding those clamps over the silicone tubing in your experiment. General These clamps are designed to easily slide over the silicone tube, allowing to stop the flow of your system towards the microfluidic chip. They are...50.00€ -
Choose Options microfluidic ChipShop
200 µL Tank with mini Luer Cap - Luer Interface (pack of 10)200 µL tanks to be fixed to female Luer ports on ChipShop microfluidic chips and store liquids. Mini Luer cap version. Sold in packs of 10 tanks. General With their Luer interface, these 200 µL tanks connect to any Luer female port on...25.00€ -
Choose Options microfluidic ChipShop
Handling Frame for ChipShop Chips - High skirt - Fluidic 352These handling frames are designed to easily interface your ChipShop microfluidic chips. They are compatible with standard inserts for SBS microtiter plates. The high skirt version has the standard height of microtiter plates. General These stackable...22.00€ -
Add to Cart The item has been added IDEX Health & Science
10-32 x 10-32 Inline Check ValveThis 10-32 x 10-32 non-metallic check valve protects against backflows. Broad chemical resistance and biocompatibility are guaranteed by the PEEK polymer and fluoroelastomer construction. The low cracking pressure (0.07 bar) is ideal for microfluidics...170.00€ -
Choose Options HNP Mikrosysteme
F-MI0 Inline Filter for HNP PumpsAn inline filter with 10 µm mesh to prevent particles from damaging your HNP micro annular gear pump. Manufactured in 316L stainless steel or alloy C22, with seals in Kalrez or EPDM to ensure the widest chemical compatibility. General The F-MI0 is an...180.00€ - 603.30€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
