Bartels mp-Lowdriver controller is a compact pump driver for mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be easily adjustable (frequency and amplitude), using the mp-Multiboard evaluation board.
General
Take control of your Bartels mp6 micropump with the mp-Lowdriver controller:
- Dimensions: 10.16 x 25.4 x 2.64 mm
- I2C interface
- Power supply: 3 – 5.5 V DC (6.0V absolute maximum rating)
- Current consumption: avg. 40 mA at 5 V
- Pin arrangement: DIL 18; horizontal 2.54 mm, vertical 7.62 mm
- Adjust all pump parameters: amplitude, frequency, signal shape
- Amplitude range: 0 – 150 Vpp
- Frequency range: 8 – 2000 Hz
- Signal form: sine, custom
The mp-Lowdriver is a small, easy to use driving circuit developed for the micropumps of the mp6-series, especially for low flow rate applications: its high amplitude resolution is ideally suited for controlled loop flow regulation systems.
Integrate the mp-Lowdriver in your own system, or control your pump parameters using the mp-Multiboard or mp-Multiboard2 with its dedicated Windows software!
Content
1x mp-Lowdriver pump driver
Specifications
| Dimensions |
10.16 x 25.4 x 2.64 mm |
| Adjustable parameters |
amplitude, frequency, signal shape |
| Amplitude range |
0 - 150 Vpp in 255 steps |
| Frequency range |
8 - 2000 Hz in 7.8125 Hz steps1 |
| Signal form |
sine, custom |
| Power supply |
3 - 5.5 VDC |
| Pin arrangement |
DIL 18; horizontal 2.54 mm, vertical 7.62 mm |
1: We do not advise to go above 800 Hz.
Documentation
Find more information and documentation here.
