mp-Highdriver Pump Driver
SKU:
BT-mp-Highdriver
MSRP:
Was:
Now:
62.90€
(You save
)
Bartels mp-Highdriver controller is a compact pump driver for mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard evaluation board.
General
The mp-Highdriver (formerly mp6-XOEM) is a small, easy to use driving circuit developed for the micropumps of the mp6-series.
- Dimensions: 10.16 x 25.40 x 2.82 mm
- I2C interface
- Power supply: 2.5 - 5.5 VDC (5 V recommended for optimized performance)
- Current consumption: avg. 40 mA at 5 V
- Pin arrangement: DIL 18; horizontal 2.54 mm, vertical 7.62 mm
- Adjust all the pump parameters: amplitude, frequency, signal shape
- Amplitude range: 10 - 250 Vpp
- Frequency range: 50 - 800 Hz
- Signal form: sine, rectangular, trapezoid
Integrate the mp-Highdriver in your own system, or control your pump parameters using the mp-Multiboard or mp-Multiboard2 with its dedicated Windows software!
Content
1x mp-Highdriver for Multiboard2
Specifications
| Dimensions | 10.16 x 25.40 x 2.82 mm |
| Adjustable parameters | amplitude, frequency, wave form |
| Amplitude range | 10 - 250 Vpp |
| Frequency range | 50 - 800 Hz |
| Signal form | sine, rectangular, trapezoid |
| Power supply | 2.5 - 5.5 VDC (5 V recommended for optimized performance) |
| Pin arrangement | DIL 18; horizontal 2.54 mm, vertical 7.62 mm |
Documentation
Find more information and documentation here.
products.product_description_title
+
Bartels mp-Highdriver controller is a compact pump driver for mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard evaluation board.
General
The mp-Highdriver (formerly mp6-XOEM) is a small, easy to use driving circuit developed for the micropumps of the mp6-series.
- Dimensions: 10.16 x 25.40 x 2.82 mm
- I2C interface
- Power supply: 2.5 - 5.5 VDC (5 V recommended for optimized performance)
- Current consumption: avg. 40 mA at 5 V
- Pin arrangement: DIL 18; horizontal 2.54 mm, vertical 7.62 mm
- Adjust all the pump parameters: amplitude, frequency, signal shape
- Amplitude range: 10 - 250 Vpp
- Frequency range: 50 - 800 Hz
- Signal form: sine, rectangular, trapezoid
Integrate the mp-Highdriver in your own system, or control your pump parameters using the mp-Multiboard or mp-Multiboard2 with its dedicated Windows software!
Content
1x mp-Highdriver for Multiboard2
Specifications
| Dimensions | 10.16 x 25.40 x 2.82 mm |
| Adjustable parameters | amplitude, frequency, wave form |
| Amplitude range | 10 - 250 Vpp |
| Frequency range | 50 - 800 Hz |
| Signal form | sine, rectangular, trapezoid |
| Power supply | 2.5 - 5.5 VDC (5 V recommended for optimized performance) |
| Pin arrangement | DIL 18; horizontal 2.54 mm, vertical 7.62 mm |
Documentation
Find more information and documentation here.
products.specification
+
short_description
Bartels mp-Highdriver controller is a compact pump driver for mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard evaluat