Making droplets has never been easier with the Elveflow Microfluidic Droplet Pack! Based on the high-precision OB1 Mk3+ pressure controller, this bundle includes everything you need to generate monodisperse droplets out-of-the-box.
The Droplet Pack is completed by a user guide with detailed instructions to build your setup and generate droplets of the right size and frequency!
Available in two versions: Small (10-40 µm droplets) and Large (50-80 µm droplets).
General
Droplet generation made easy
The Elveflow Microfluidic Droplet Pack was designed to ease your daily lab work, by providing a complete and evolutive solution to generate droplets out-of-the-box!
- Unbox your Droplet Pack
- Install your system following the step-by-step User Guide
- Generate your droplets using detailed protocols and characterized microfluidic chips
Based on the high-precision OB1 Mk3+ pressure controller and MFS flow sensors, this pack comes with all the accessories you need to start generating reproducible and monodisperse (PDI <2%) water-in-oil droplets immediately.
Droplet Pack features
Two Droplet Pack versions are available, based on the droplet range:
-
Small: for droplets between 10 and 40 µm
-
Large: for droplets between 50 and 80 µm
Each pack contains the following:
- 1x OB1 Mk3+ flow controller with 2 channels (oil phase / water phase)
- 2x MFS flow sensors (for oil and water)
- 2x sets of flow resistors (for stable and accurate flow control)
- 2x ChipShop microfluidic droplet generators
- All necessary reservoirs and tubings
Created by a team of experts in droplet-microfluidics, the User Guide included in this pack details all the steps to build your setup and generate droplets of a defined size. Just follow the steps to generate droplets meeting your project's needs!
The Droplet Pack is evolutive: start with characterized microfluidic chips now, and use the same system with any other microfluidic chip.
Schematic of the Droplet Pack Large (for droplets of 50-80 µm). Only the flow restrictors and MFS change in the Small version, to get the best performances out of your microfluidic system.
Content
| Small version |
Large version |
|
1x MFS2 flow sensor
1x MFS3 flow sensor
|
2x MFS2 flow sensors |
|
1x Flow restrictor KFR-22-H
1x Flow restrictor KFR-23-I
|
1x Flow restrictor KFR-22-H
1x Flow restrictor KFR-22-H
|
| 1x OB1 Mk3+ 2 channels (0-2 bar) |
| ESI control and automation software |
|
2x Reservoirs 1.5 mL Eppendorf
2x Reservoirs 15 mL Falcon
2x Reservoirs 50 mL Falcon
|
|
1x ChipShop Fluidic 440
1x ChipShop Fluidic 947
|
|
1x WallE reservoir holder
|
|
1x 10 mL FluoSurf mix 2% w/w in HFE7500
|
|
1x Accessories starter pack
|
|
1x User guide with detailed instructions to build your setup and generate droplets out-of-the-box
|
A pressure source is required to use the OB1 pressure controller (not included in the Droplet Pack).
Specifications
Droplet size and frequency specifications
| |
Droplet size (µm)
|
Droplet volume (pL)
|
Frequency (Hz)
|
|
SMALL
Fluidic 947 chip
|
10
|
15.7
|
910-1270
|
|
15
|
23.5
|
590-752
|
|
20
|
31.4
|
385-512
|
|
30
|
47
|
109-417
|
|
LARGE
Fluidic 440 chip
|
50
|
78.5
|
75-367
|
|
60
|
94
|
69-333
|
|
70
|
109.9
|
43-145
|
|
80
|
251.2
|
13-57
|
Instruments & accessories specifications
OB1 Mk3+ flow controller - 2 channels 0-2 bar: See full specifications here
MFS flow sensors: See full specifications here
FluoSurf 2 w/w% surfactant in HFE-7500: See full specifications here
ChipShop Fluidic 947 and Fluidic 440:
