IP Low-Speed Analog Peristaltic Pump
- Product SKU: IM-78011-01
- Category: Ismatec, Peristaltic pumps, Precision Peristaltic Pumps, Pumps & Flow Controllers
The IP Low-Speed is a simple planetary gear-driven peristaltic pump with 4 up to 24 channels, ensuring an accurate liquid flow from 0.4 µL/min up to 44 mL/min with a low pulsatility.
This pump cannot be connected to a computer or programmed: the only controllable parameters are Run/Stop, Direction and Speed control.
A powerful and accurate analog peristaltic pump
Ismatec, established in 1964, is now a leading reference in peristaltic pumps thanks to its offer of high-precision pumps. The planetary gears working principle of this multichannel pump decreases the level of pulsation and ensures a longer tubing life.
Eight stainless steel rollers works simultaneously in a smooth rotation to create a stable and highly reproducible liquid flow.
The pump is controlled through a 6-button membrane keypad with LED display, for Run/Stop, Direction and Speed control. Cartridges with automatic occlusion (Click’n’go™) provide a simplified use as well as reproducible results through defined and repeatable occlusion conditions.
The main difference between the IP and IP-N series is the flow range: it is 0.0004 - 11 mL/min for the IP-N series, and 0.002 - 44 mL/min for the IP series.
Features
- 3 functions: Run/Stop, Direction, Speed Control
- Click’n’go™ cartridges with automatic occlusion reduces tube wear and provides reproducible results
- 8 simultaneous stainless steel rollers
- Accurate pumping through planetary driving
- Microprocessor controlled drive
- No dispensing features (not programmable)
- No calibrating functions
- Extremely low pulsation
- Multi-channel fluid transfer and possibility of dosing or filling applications (low-flow)
Characteristics
|
Flow rates |
|
| Tube-bed |
|
| Compatible tubing |
|
| Channels |
|
| Operating panel |
|
| Operating mode |
|
| Speed setting |
|
| Speed control |
|
| Remote control |
|
| Power (VAC) |
|
| Protection rating |
|
More specifications under the "Specifications" tab.
PDF Manual
Digital Peristaltic Pump series IP-N
| Min RPM | 0.11 |
| Max RPM | 11.25 |
| Number of channels | 4, 8, 12, 16 or 24 |
| Max flow rate (mL/min) | 11 |
| Min flow rate (mL/min) | 0.0004 |
| Max pressure (PSI) | 22 |
| Max pressure (bar) | 1.5 |
| Accuracy | better than ±1% |
| Differential pressure | 1.0 bar (14.5 psi) possible (depending on tubing material) ; small tubing diameters and/or cassettes with pressure lever allow higher pressures |
| Number of rollers | 8 |
| Power (VAC) | 115 or 230 |
| Power (Hz) | 50/60 or 50 |
| Duty Cycle | Continuous |
| Dimensions (L x W x H) | From 180 mm to 380 mm depending on the channel number x 175 mm x 130 mm |
| Analog input | Speed control (0–5 or 0–10V / 0–20 or 4–20mA) |
| Analog output | Speed monitoring (0–10VDC) |
Digital Peristaltic Pump series IP
| Min RPM | 0.4 |
| Max RPM | 45 |
| Number of channels | 4, 8, 12, 16 or 24 |
| Max flow rate (mL/min) | 44 |
| Min flow rate (mL/min) | 0.002 |
| Tubing | 2-Stop Tubing (0.13 - 3.17 mm ID) |
| Max pressure (PSI) | 22 |
| Max pressure (bar) | 1.5 |
| Differential pressure | 1.0 bar (14.5 psi) possible (depending on tubing material) ; small tubing diameters and/or cassettes with pressure lever allow higher pressures |
| Accuracy | better than ±1% |
| Number of rollers | 8 |
| Power (VAC) | 115 or 230 |
| Power (Hz) | 50/60 or 50 |
| Duty Cycle | Continuous |
| Dimensions (L x W x H) | From 180 mm to 380 mm depending on the channel number x 175 mm x 130 mm |
| Analog input | Speed control (0–5 or 0–10V / 0–20 or 4–20mA) |
| Analog output | Speed monitoring (0–10VDC) |
Payment Terms
You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!
Credit card
- Add your products to the cart
- In the cart page, click on Proceed to Checkout
- Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
- That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.
Invoice
- Add your products to the cart
- In the website header, click on Request a Quote
- Fill in the required informations, then click on Submit Quote
- Our team will send you a quote shortly
- After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
- Our team will complete your purchase and send you the invoice!
If you wish to pay in USD or GBP, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.
Worldwide shipping
We ship worldwide from our warehouse in France.
The shipping charges are calculated based on the weight of the package and the country of destination: you can estimate the shipping cost on the cart page. We try to offer you the best shipping rates and services, shipping all our orders through DHL Express. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination!
Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!
