The IP Low-Speed is a simple planetary gear-driven peristaltic pump with 4 up to 24 channels, ensuring an accurate liquid flow from 0.4 µL/min up to 44 mL/min with a low pulsatility.
This pump cannot be connected to a computer or programmed: the only controllable parameters are Run/Stop, Direction, and Speed control.
General
Ismatec, established in 1964, is now a leading reference in peristaltic pumps thanks to its offer of high-precision pumps. The planetary gears working principle of this multichannel pump decreases the level of pulsation and ensures a longer tubing life. Eight stainless steel rollers work simultaneously in a smooth rotation to create a stable and highly reproducible liquid flow.
This powerful and accurate peristaltic pump is controlled through a 6-button membrane keypad with LED display, for Run/Stop, Direction, and Speed control. Cartridges with automatic occlusion (Click’n’go™) provide a simplified use as well as reproducible results through defined and repeatable occlusion conditions.
The main difference between the IP and IP-N series is the flow range: 0.0004 - 11 mL/min for the IP-N series, and 0.002 - 44 mL/min for the IP series.
Features
- 3 functions: Run/Stop, Direction, Speed Control
- Click’n’go™ cartridges with automatic occlusion reduce tube wear and provide reproducible results
- 8 simultaneous stainless steel rollers
- Accurate pumping through planetary driving
- Microprocessor controlled drive
- No dispensing features (not programmable)
- No calibrating functions
- Extremely low pulsation
- Multi-channel fluid transfer and the possibility of dosing or filling applications (low-flow)
Characteristics
| Pump series |
IP-N |
IP |
|
Flow rates (per channel)
|
0.0004 - 11 ml/min |
0.002 - 44 ml/min |
| Tube-bed |
- CA Click'n'go cassettes
- Simple handling
- Automatic occlusion setting
- Defined and reproducible occlusion conditions
- Each channel allows individual tubing selection
|
| Compatible tubing |
2-Stop tubing (0.13 - 3.17 mm ID) |
| Channels |
4, 8, 12, or 24 |
4, 8, 12, 16 or 24 |
| Operating panel |
- 6-button membrane key-pad with LED display
- 2 LEDs indicating LOCAL and REMOTE operation
- MAX key for fast filling or emptying the tubing system
|
| Operating mode |
- Pumping by speed (rpm)
- Stand-by mode - prevents tubing system from drying out
- Reversible rotation direction
|
| Speed setting |
- in % with a resolution of 0.1 % (rpm)
- in rpm, resolution 0.1 rpm (IP) or 0.03 rpm (IP-N)
|
| Speed control |
closed loop control for load-independent speed |
| Remote control |
analog interface: no RS232 to connect the pump to a computer |
| Power (VAC) |
115 or 230 |
| Protection rating |
IP30 |
Content
1x IP-N or IP Low-Speed analog peristaltic pump
1x Power supply
Specifications
| Pump series |
IP-N |
IP |
| Compatible tubing |
2-Stop tubing (0.13 - 3.17 mm ID) |
| Min RPM |
0.11 |
0.4 |
| Max RPM |
11.25 |
45 |
| Number of channels |
4, 8, 12, or 24 |
4, 8, 12, 16 or 24 |
| Max flow rate (mL/min) |
11 |
44 |
| Min flow rate (mL/min) |
0.0004 |
0.002 |
| Max pressure (PSI) |
22 |
| Max pressure (bar) |
1.5 |
| Accuracy |
better than ±1% |
| Differential pressure |
1.0 bar (14.5 psi) possible (depending on tubing material); small tubing diameters and/or cassettes with pressure lever allow higher pressures
|
| Number of rollers |
8 |
| Power (VAC) |
115 or 230 |
| Power (Hz) |
50/60 or 50 |
| Duty Cycle |
Continuous |
| Dimensions (L x W x H) |
From 180 mm to 380 mm depending on the channel number x 175 mm x 130 mm |
| Analog input |
Speed control (0–5 or 0–10V / 0–20 or 4–20mA) |
| Analog output |
Speed monitoring (0–10VDC) |
| IP rating |
IP30 |
Documentation
? IP Low-Speed analog peristaltic pump operating manual
