Bartels mp-Highdriver4 is a multi-pump driver capable of controlling four mp6 micropumps simultaneously. Pump parameters are easily adjustable (frequency, amplitude, signal shape) using the mp-Multiboard evaluation board.
General
Take control of your Bartels mp6 micropump with the mp-Highdriver4 driver:
- Dimensions: 38.1 mm x 17.78 mm
- I2C interface
- Power supply: 2.7 - 5.5 VDC
- Current consumption: avg. 75 mA
- Pin arrangement: DIL 28 ; horizontal 2.54 mm, vertical 6 mm
- Adjust all the pump parameters: amplitude and frequency via the Multiboard application and the signal shape using bits in the shape registers
- Amplitude range: 10 - 250 Vpp
- Frequency range: 50 - 800 Hz
- Signal form: sine, rectangular, trapezoid
The mp-Highdriver4 was designed to control up to four mp6 micropumps. Integrate the mp-Highdriver4 in your own system, or control your pump parameters using the mp-Multiboard or mp-Multiboard2 with its dedicated Windows software!
Content
1x mp-Highdriver4 for Multiboard2
Specifications
| Dimensions |
38.1 mm x 17.78 mm |
| Adjustable parameters |
amplitude, frequency, wave form |
| Amplitude range |
10 - 250 Vpp |
| Frequency range |
50 - 800 Hz |
| Signal form |
sine, rectangular, trapezoid |
| Power supply |
2.7 - 5.5 VDC |
| Pin arrangement |
DIL 28 ; horizontal 2.54 mm, vertical 6 mm |
Documentation
Find more information and documentation here.
