G100-2J Peristaltic Pump for Incubator
The new G100-2J peristaltic pump is an update of our well-known G100-1J. It is still compatible with working directly in the incubator to be as close as possible to your sample or microfluidic chip. It has been improved with a better thermal dissipation system.
Flow range from 2 µL/min up to 366.7 mL/min, and various pump heads are available from 1 up to 8 channels.
Silicone tubing included with each pump channel.
General
This G100-2J peristaltic pump is compatible with the incubator environment. It is IP65-rated: dust-proof and resistant to water or highly humid environments.
- Wide flow range from 2 µL/min up to 366.7 mL/min
- Waterproof plug and socket
- Compatible with relative humidity conditions up to 90%
- Improved heat dissipation with a new internal fan (UL certified) and waterproof valve
- Aluminum alloy housing with anti-corrosion paint treatment
- LCD screen to display the main parameters and running status
- Keypad lock function: Keypad can be locked to prevent misoperation (the locking delay time can be tuned)
- Easy to use: Start/Stop, Direction, and Speed parameters can be controlled from a keypad
- Available with various pump heads, flow range from 1.5 µL/min to 366 mL/min (see specifications for more details)
- Programmable from a computer: RS485 interface (waterproof connector included)
As indicated by the manufacturer, the G100-2J peristaltic pump can tolerate the common working conditions of a cell culture incubator: 95% of humidity at 37°C.
Tip: Adding rollers will allow a more accurate and less pulsatile flow, but a lower max. flow rate.
Silicone tubing included with each channel:
- DG: 3-stop 1*1 mm (1 mm ID x 3 mm OD) and 2*1 mm (2 mm ID x 4 mm OD)
- YZ1515X or YZII15: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- YZ2515X or YZII25: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
- DG15-24: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- DG15-28: 13# (0.8 mm ID x 4.0 mm OD and 14# (1.6 mm ID x 5.0 mm OD) with slip-on tubing stops
| Pump head | Materials | Compatible tubing type | Number of rollers | Flow range (0.1-100 rpm) |
|
DG-A (6 rollers) Up to 8 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8 3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
6 |
0.5*0.8: 0.0025-2 mL/min 1*1: 0.008-8 mL/min 2*1: 0.028-28 mL/min 2.4*0.8: 0.032-32 mL/min 3*1: 0.048-48 mL/min |
|
DG-B (10 rollers) Up to 4 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8 3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm
|
10 |
0.5*0.8: 0.002-1.5 mL/min 1*1: 0.006-6 mL/min 2*1: 0.022-22 mL/min 2.4*0.8: 0.024-24 mL/min 3*1: 0.032-32 mL/min |
|
YZ1515X-A / YZII15 0.006-366.7 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
3 |
13# (0.8 mm ID): 0.006-6.3 mL/min 14# (1.6 mm ID): 0.025-25 mL/min 19# (2.4 mm ID): 0.042-41.7 mL/min 16# (3.2 mm ID): 0.077-76.7 mL/min 25# (4.8 mm ID): 0.16-160 mL/min 17# (6.4 mm ID): 0.26-266.7 mL/min 18# (7.9 mm ID): 0.36-366.7 mL/min |
|
YZ1515X-B 0.006-244.3 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
6 |
13# (0.8 mm ID): 0.006-4.2 mL/min 14# (1.6 mm ID): 0.025-16.7 mL/min 19# (2.4 mm ID): 0.042-27.8 mL/min 16# (3.2 mm ID): 0.077-51.1 mL/min 25# (4.8 mm ID): 0.16-106.7 mL/min 17# (6.4 mm ID): 0.26-177.6 mL/min 18# (7.9 mm ID): 0.36-244.3 mL/min |
|
YZ2515X / YZII25 0.16-266.7 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 2.4 mm Tubing sizes: 15#, 24# |
3 |
15# (4.8 mm ID): 0.16-160 mL/min 24# (6.4 mm ID): 0.26-266.7 mL/min |
|
DG15-24 0.09-300 mL/min 2 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers Tubing sizes: 16#, 25#, 17# |
4 |
16# (3.2 mm ID): 0.09-90 mL/min 25# (4.8 mm ID): 0.24-183.3 mL/min 17# (6.4 mm ID): 0.4-300 mL/min |
|
DG15-28 0.03-46 mL/min 2 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers, addition of slip-on tubing stops required Tubing sizes: 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8, or microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm
|
8 |
ID ≤ 3.17 mm, wall thickness 0.8-1 mm: ≤75 mL/min 0.5*0.8: 0.03-3.2 mL/min 1*1: 0.13-10 mL/min 2*1: 0.3-46 mL/min 2.4*0.8: 0.5-46 mL/min 13# (0.8 mm ID): 0.07-3.8 mL/min 14# (1.6 mm ID): 0.27-18 mL/min |
Content
1x G100-2J peristaltic pump drive
1x Pump head (DG or YZ1515X)
1x Power supply
With the DG pump head, for each channel:
- 1x 1m of 3-stop 1*1 mm tubing
- 1x 1m of 3-stop 2*1 mm tubing
With the YZ1515X or YZII15 pump head:
- 1x 2m of 16# peristaltic tubing
- 1x 2m of 25# peristaltic tubing
With the YZ2515X or YZII25 pump head:
- 1x 2m of 15# peristaltic tubing
- 1x 2m of 24# peristaltic tubing
With the DG15-24 pump head:
- 1x 2m of 16# peristaltic tubing
- 1x 2m of 25# peristaltic tubing
With the DG15-28 pump head:
- 1x 2m of 13# peristaltic tubing
- 1x 2m of 14# peristaltic tubing
- O-rings/Slip-on tubing stops
Specifications
| Technical specifications | |
| Speed | 0-100 rpm, CW/CCW |
| Speed resolution | 0.1 rpm |
| Display | LCD |
| Control mode | Keypad, external signal control, and communication control available |
| External control | Start/stop control, direction control: voltage level signal or switch signal is optional |
| Speed control | 0-5 V,0-10 V,4-20 mA, and 0-10 kHz are optional with a uniform interface, max speed can be changed within 100 rpm |
| Communication control | RS485 interface (connector included), Longer protocol, or Modbus protocol, the communication parameters (baud rate, parity, stop bit) can be set through the keypad |
| Parameter memory | Running parameters and system parameters will be saved automatically |
| Running state when power on | The running state when power is on can be set as stop or as the previous state |
| Prime | Fast filling or emptying at full speed |
| EMC | Complies with EMC Directive 2014/30/EU |
| Keypad lock function | The keypad can be locked to prevent misoperation. The locking delay time can be set |
| Dimensions (L x W x H) | 235 mm x 142 mm x 152 mm |
| Power supply | AC90V-260V/20W, 50-60Hz |
| Operating temperature | 0-40 °C |
| Relative humidity | 10 % - 90 % |
| IP rating | IP65 |
| Drive weight (kg) | 3.64 |
| Pump head compatibility | |||
| Pump head | Number of channels | Max. stacked pump heads on one drive | Tubing compatibility |
| YZ1515X | 1 | 4 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| YZ2515X | 1 | 4 | 15#, 24# |
| YZII15 | 1 | 4 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| YZII25 | 1 | 4 | 15#, 24# |
| DG | Up to 8 | 1 |
3-stop tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
| DG15-24 | 2 | 1 | 16#, 25#, 17# |
| DG15-28 | 2 | 1 |
Standard tubing with slip-on tubing stops ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
|
DMD15-13-B DMD15-13-D |
1 | 2 | 13#, 14#, 19#, 16#, 25# |
|
BZ15-13 BZ25-13 |
1 | 1 | 14#, 16#, 25#, 17#, 24# |
Documentation
The new G100-2J peristaltic pump is an update of our well-known G100-1J. It is still compatible with working directly in the incubator to be as close as possible to your sample or microfluidic chip. It has been improved with a better thermal dissipation system.
Flow range from 2 µL/min up to 366.7 mL/min, and various pump heads are available from 1 up to 8 channels.
Silicone tubing included with each pump channel.
General
This G100-2J peristaltic pump is compatible with the incubator environment. It is IP65-rated: dust-proof and resistant to water or highly humid environments.
- Wide flow range from 2 µL/min up to 366.7 mL/min
- Waterproof plug and socket
- Compatible with relative humidity conditions up to 90%
- Improved heat dissipation with a new internal fan (UL certified) and waterproof valve
- Aluminum alloy housing with anti-corrosion paint treatment
- LCD screen to display the main parameters and running status
- Keypad lock function: Keypad can be locked to prevent misoperation (the locking delay time can be tuned)
- Easy to use: Start/Stop, Direction, and Speed parameters can be controlled from a keypad
- Available with various pump heads, flow range from 1.5 µL/min to 366 mL/min (see specifications for more details)
- Programmable from a computer: RS485 interface (waterproof connector included)
As indicated by the manufacturer, the G100-2J peristaltic pump can tolerate the common working conditions of a cell culture incubator: 95% of humidity at 37°C.
Tip: Adding rollers will allow a more accurate and less pulsatile flow, but a lower max. flow rate.
Silicone tubing included with each channel:
- DG: 3-stop 1*1 mm (1 mm ID x 3 mm OD) and 2*1 mm (2 mm ID x 4 mm OD)
- YZ1515X or YZII15: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- YZ2515X or YZII25: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
- DG15-24: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- DG15-28: 13# (0.8 mm ID x 4.0 mm OD and 14# (1.6 mm ID x 5.0 mm OD) with slip-on tubing stops
| Pump head | Materials | Compatible tubing type | Number of rollers | Flow range (0.1-100 rpm) |
|
DG-A (6 rollers) Up to 8 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8 3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
6 |
0.5*0.8: 0.0025-2 mL/min 1*1: 0.008-8 mL/min 2*1: 0.028-28 mL/min 2.4*0.8: 0.032-32 mL/min 3*1: 0.048-48 mL/min |
|
DG-B (10 rollers) Up to 4 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8 3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm
|
10 |
0.5*0.8: 0.002-1.5 mL/min 1*1: 0.006-6 mL/min 2*1: 0.022-22 mL/min 2.4*0.8: 0.024-24 mL/min 3*1: 0.032-32 mL/min |
|
YZ1515X-A / YZII15 0.006-366.7 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
3 |
13# (0.8 mm ID): 0.006-6.3 mL/min 14# (1.6 mm ID): 0.025-25 mL/min 19# (2.4 mm ID): 0.042-41.7 mL/min 16# (3.2 mm ID): 0.077-76.7 mL/min 25# (4.8 mm ID): 0.16-160 mL/min 17# (6.4 mm ID): 0.26-266.7 mL/min 18# (7.9 mm ID): 0.36-366.7 mL/min |
|
YZ1515X-B 0.006-244.3 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
6 |
13# (0.8 mm ID): 0.006-4.2 mL/min 14# (1.6 mm ID): 0.025-16.7 mL/min 19# (2.4 mm ID): 0.042-27.8 mL/min 16# (3.2 mm ID): 0.077-51.1 mL/min 25# (4.8 mm ID): 0.16-106.7 mL/min 17# (6.4 mm ID): 0.26-177.6 mL/min 18# (7.9 mm ID): 0.36-244.3 mL/min |
|
YZ2515X / YZII25 0.16-266.7 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 2.4 mm Tubing sizes: 15#, 24# |
3 |
15# (4.8 mm ID): 0.16-160 mL/min 24# (6.4 mm ID): 0.26-266.7 mL/min |
|
DG15-24 0.09-300 mL/min 2 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers Tubing sizes: 16#, 25#, 17# |
4 |
16# (3.2 mm ID): 0.09-90 mL/min 25# (4.8 mm ID): 0.24-183.3 mL/min 17# (6.4 mm ID): 0.4-300 mL/min |
|
DG15-28 0.03-46 mL/min 2 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers, addition of slip-on tubing stops required Tubing sizes: 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8, or microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm
|
8 |
ID ≤ 3.17 mm, wall thickness 0.8-1 mm: ≤75 mL/min 0.5*0.8: 0.03-3.2 mL/min 1*1: 0.13-10 mL/min 2*1: 0.3-46 mL/min 2.4*0.8: 0.5-46 mL/min 13# (0.8 mm ID): 0.07-3.8 mL/min 14# (1.6 mm ID): 0.27-18 mL/min |
Content
1x G100-2J peristaltic pump drive
1x Pump head (DG or YZ1515X)
1x Power supply
With the DG pump head, for each channel:
- 1x 1m of 3-stop 1*1 mm tubing
- 1x 1m of 3-stop 2*1 mm tubing
With the YZ1515X or YZII15 pump head:
- 1x 2m of 16# peristaltic tubing
- 1x 2m of 25# peristaltic tubing
With the YZ2515X or YZII25 pump head:
- 1x 2m of 15# peristaltic tubing
- 1x 2m of 24# peristaltic tubing
With the DG15-24 pump head:
- 1x 2m of 16# peristaltic tubing
- 1x 2m of 25# peristaltic tubing
With the DG15-28 pump head:
- 1x 2m of 13# peristaltic tubing
- 1x 2m of 14# peristaltic tubing
- O-rings/Slip-on tubing stops
Specifications
| Technical specifications | |
| Speed | 0-100 rpm, CW/CCW |
| Speed resolution | 0.1 rpm |
| Display | LCD |
| Control mode | Keypad, external signal control, and communication control available |
| External control | Start/stop control, direction control: voltage level signal or switch signal is optional |
| Speed control | 0-5 V,0-10 V,4-20 mA, and 0-10 kHz are optional with a uniform interface, max speed can be changed within 100 rpm |
| Communication control | RS485 interface (connector included), Longer protocol, or Modbus protocol, the communication parameters (baud rate, parity, stop bit) can be set through the keypad |
| Parameter memory | Running parameters and system parameters will be saved automatically |
| Running state when power on | The running state when power is on can be set as stop or as the previous state |
| Prime | Fast filling or emptying at full speed |
| EMC | Complies with EMC Directive 2014/30/EU |
| Keypad lock function | The keypad can be locked to prevent misoperation. The locking delay time can be set |
| Dimensions (L x W x H) | 235 mm x 142 mm x 152 mm |
| Power supply | AC90V-260V/20W, 50-60Hz |
| Operating temperature | 0-40 °C |
| Relative humidity | 10 % - 90 % |
| IP rating | IP65 |
| Drive weight (kg) | 3.64 |
| Pump head compatibility | |||
| Pump head | Number of channels | Max. stacked pump heads on one drive | Tubing compatibility |
| YZ1515X | 1 | 4 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| YZ2515X | 1 | 4 | 15#, 24# |
| YZII15 | 1 | 4 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| YZII25 | 1 | 4 | 15#, 24# |
| DG | Up to 8 | 1 |
3-stop tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
| DG15-24 | 2 | 1 | 16#, 25#, 17# |
| DG15-28 | 2 | 1 |
Standard tubing with slip-on tubing stops ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
|
DMD15-13-B DMD15-13-D |
1 | 2 | 13#, 14#, 19#, 16#, 25# |
|
BZ15-13 BZ25-13 |
1 | 1 | 14#, 16#, 25#, 17#, 24# |