Soft-lithography UV System with Alignment for SU-8 Mold

Microfabrication

Soft-lithography UV System with Alignment for SU-8 Mold



Category: Microfabrication

This lab-in-a-lab UV LED chamber is the solution to make your own SU-8 mold with a professional quality.  A photosensitive chemical is exposed to UV light to create the patterns of the mold, which will then be used for the creation of microfluidic chips. Easy to use, a video assisted alignment system is featured to ensure a fully guided and highly accurate process. You don't even need a clean room to use it !

On Demand

Our specialized microfluidics team will gladly help you define your needs
This lab-in-a-lab UV LED chamber is the solution to make your own SU-8 mold with a professional quality.  A photosensitive chemical is exposed to UV light to create the patterns of the mold, which will then be used for the creation of microfluidic chips. Easy to use, a video assisted alignment system is featured to ensure a fully guided and highly accurate process. You don't even need a clean room to use it !

Why manufacturing your own SU-8 molds ?

Thanks to this UV chamber, you can keep the control of your intellectual property, avoid wasting time in discussions with intermediaries and set up any new experiment that comes to your mind quicker. This device doesn't even require a clean room to reach a professional accuracy : take the advantages of a professional manufacturing without its drawbacks !

 

Features & Benefits

This product comes with a video positioning system piloted by PAD, giving an alignment resolution down to 5 µm.

 

ACCURATE 

Monochromatic UV exposure (bandwidth lower than 10 nm).

Highly collimated : light divergence angle < 2°.

Mask resolution of 2 µm : suitable for most of the applications in microfluidics.

Strong power density of 30 mW/cm².


CONVENIENT

LED light : no heating, more than 10000 hours of lifetime and no warm-up time. Wavelength of 365 nm.

Little and safe : you don't need any clean room to use it.

Plug & Play, user-friendly touch screen interface for programming.

This system is compatible with hard or soft masking contacts, and various distances between the mask and the substrate can be set. 

 

STRONG SUPPORT

Our team will guide you if needed for every step of the microfabrication process. We can help you at anytime to solve your issue.

We would be happy to tell you more about this product ! Feel free to contact us.

  • Video assisted positioning system
  • No warm-up time
  • Flash-mode exposure : no mechanical stress, extended machine lifetime
  • Automated wafer loading and unloading system
  • Glass and plastic masks compatible
  • Touch-screen interface

The device comes with a 1-year warranty and a technical support by e-mail, phone or Skype.


Microfluidics contact team

Contact our team:

contact@darwin-microfluidics.com


Our specialized team is at your service to help you pick the product best suited to your needs. We also offer specific quotes for high quantity, specific, or custom orders. Feel free to ask, that's what we're for!