-
Add to Cart The item has been added IDEX Health & Science
Super Flangeless Ferrule PEEK 10-32 for 1/16” OD (pack of 10)These Super Flangeless ferrules are made to resist high pressure when combined with 10-32 flat-bottom ports. Sold in packs of 10. General Resistant to high pressure and manufactured in PEEK, these Super Flangeless ferrules are made for 10-32 flat-bottom...220.10€ -
Add to Cart The item has been added microfluidic ChipShop
Fiber Sensor Chip - In-line - Mini LuerThe Fluidic 1457 Fiber Sensor Chip manufactured by ChipShop features one straight channel with four sensor ports to monitor chemical or biological reactions. The inlets and outlets with integrated mini Luer connections ensure leak-free...42.20€ -
Add to Cart The item has been added IDEX Health & Science
Fingertight Double-Wing 10-32 Coned Fitting for 1/16" OD Tubing (pack of 10)These double wing Fingertight fittings comprise a nut and a ferrule, manufactured in PEEK, for 1/16" OD tubing. Available in a pack of 10 units. General Fingertight fitting with a winged nut head to provide extra leverage when tightening it into a...94.20€ -
Choose Options Masterflex
L/S Tygon E-Lab (E-3603) Pump Tubing (15.2 m)Masterflex Tygon E-Lab is an economical tubing for general lab transfer applications. Compatible with any pump heads accepting L/S tubing, 15.2 m / 50 ft per roll. General Masterflex Tygon E-Lab tubing is designed for general laboratory applications. 15...72.80€ - 361.00€ -
Choose Options New Era Pump Systems
OEM Starter KitComplete kit to control your New Era OEM pump from a computer through a RS-232 interface. Includes a power supply, pump-to-PC network cable and user manual. General A complete kit to run and control your OEM pump from New Era. Includes the...32.60€ -
Add to Cart The item has been added microfluidic ChipShop
Organ-on-a-Chip - Cross-flow membrane - Luer and Mini LuerThe Fluidic 568 Organ-on-a-Chip by Microfluidic ChipShop is a cost-effective and compact solution for recreating in vitro biological barriers. Each chip features two distinct culture chambers, allowing the co-culture of various cell types in two...79.50€ -
Add to Cart The item has been added Grace Bio-Labs
Press Fit Tubing Connectors (pack of 20)Simply connect your Grace Bio-Labs chamber to pumps or other devices for microfluidic applications. A leak-proof seal is created by pressing the adhesive-coated connector against the filling port of the chamber. 20 units per pack. General These...40.90€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned PEEK Fittings for NanoPort (pack of 10)These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless fittings Highly inert and chemical-resistant PEEK material for a...94.20€ -
Add to Cart The item has been added BFlow
Straight Press-in PlugClose the chips inlets/outlets with these press-in plugs to prevent evaporation or contamination of your experiment. Designed for holes of 3 mm diameter and autoclavable. General These press-in plugs have been designed to close punched holes of 3 mm...50.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 One-Piece Super Flangeless Fitting for 1/16” OD (pack of 10)This One-Piece Super Flangeless 1/4-28 fitting holds 1/16" OD tubing for high-pressure applications. Sold by packs of 10 fittings. General These One-Piece Super Flangeless fittings strongly connect 1/16" OD rigid tubing to any 1/4-28 female port. They...159.40€ -
Choose Options New Era Pump Systems
NE-1060 SyringeONE:173 High Flow Rate Programmable Syringe PumpThe NE-1060 SyringeONE:173 from New Era is a single-channel programmable syringe pump for high flow rates. In this version, the SyringeONE:173 can generate flow rates up to 960.5 mL/min. The SyringeONE:173 pump is fully programmable...1,465.70€ -
Add to Cart The item has been added Darwin Microfluidics
10-32 UNF to Female Luer Adapters (pack of 25)A pack of 10-32 UNF to Luer adapters in Nylon. Pack of 25 units. General 10-32 UNF to Luer adapters allow for easy interfacing between two port types. Manufactured in Nylon, these connectors can be sterilized using ethylene oxide, gamma irradiation, or...44.90€ -
Choose Options microfluidic ChipShop
Droplet Generator & Storage Chip - Mini Luer-1705288681The Fluidic 488 Microfluidic Device by Microfluidic ChipShop integrates a droplet generator and a chamber with small traps for storing and capturing droplets, enabling further analysis. The chip is fabricated in polycarbonate (PC) or in Topas (COC) and...42.20€ -
Add to Cart The item has been added microfluidic ChipShop
Female Luer Flat Caps (pack of 10)These Fluidic 1231 flat caps are made to seal female Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Luer interfaces without additional height to the microfluidic system hence with a minimal footprint. Content 10x Female...19.00€ -
Add to Cart The item has been added Micronit
Fluidic Connect 4515 Stainless Steel Connection KitA connection kit with fittings, ferrules, and stainless steel tubing to create a secure connection between your pump and the Fluidic Connect 4515 chip holder from Micronit. This kit is recommended for high-pressure applications. General This kit is used...459.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Female Flat-Bottom to 10-32 Coned Male Adapter (pack of 5)PEEK 1/4-28 female flat-bottom to 10-32 coned male adapters are made to connect a 1/4-28 fitting in a 10-32 port. Pack of 5 units. General This adapter allows you to connect a 1/4-28 flat-bottom fitting to a 10-32 coned. Manufactured in PEEK, it is...114.40€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to Male 10-32 Coned Adapters (pack of 5)Create a quick connection between different threads with this female luer to male 10-32 coned adapter, manufactured from natural ETFE. Sold by pack of 5 units. General Female Luer to male 10-32 coned adapter in ETFE to make a quick connection between a...31.00€ -
Add to Cart The item has been added ELVEFLOW
Kit Fittings Starter Pack Push-in for OB1 Mk4Complete kit with all the fittings and connectors to get started out of the box with the Elveflow OB1 Mk4 controller. These push-in fittings are compatible with the -900/6000 mbar and 8000 mbar pressure range of the OB1 Mk4 pressure controller...730.00€ -
Choose Options Masterflex
L/S Chem-Durance Bio Pump Tubing (15.2 m)Masterflex Chem-Durance Bio offers excellent chemical compatibility over a wide range of chemicals, along with long life for peristaltic pumping. Compatible with any pump heads accepting L/S tubing, 15.2 m / 50 ft per roll. General Masterflex...268.00€ - 837.00€ -
Choose Options Advanced Microfluidics
SPM - Industrial OEM Low Volume Syringe PumpThis OEM sequential microdispenser is a high-precision dosing device for automated microfluidic applications. Its high-accuracy dosing and low-pulse flow stream capabilities make it the perfect tool for multiple liquid handling in the range of...2,382.90€ - 2,637.90€ -
Choose Options IDEX Health & Science
10-32 Super Flangeless Nut PEEK for 1/16" OD (pack of 10)This Super Flangeless 10-32 nut maintains 1/16" OD tubing through high pressure. Sold in packs of 10 nuts. General 10-32 Super Flangeless nuts provide the highest pressure holding capability in a flat-bottom fitting system. They are designed to interface...58.80€ - 59.20€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 630-670 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 630 to 670 µm OD tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...38.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Luer Lock Check Valve (pack of 10)One-way check valve with low cracking pressure (20 mbar) to prevent backflow and for recirculation setups. General A check valve for recirculation setup or protection of your equipment, for use in your microfluidic system. This valve is...54.00€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 125-165 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 125 to 165 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit perfectly to NanoTight and flangeless fittings...36.00€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
