SLF3S-1300F Liquid Flow Sensor
The SLF3S series is the new generation of Sensirion liquid flow sensors for low flow rates. With an unrivaled price-performance ratio, these sensors allow for high-precision flow measurements over a wide range of flow rates.
From 0 to 40 mL/min, the SLF3S-1300F offers a short response time below 20 ms and sensitivity down to 0.05 mL/min.
General
Based on Sensirion's proven CMOSens® technology, the new SLF3x sensor series is the result of Sensirion latest product developments. Its simpler design reduces the cost of this sensor, without compromising its performance. Flow rate is measured through the wall of a straight flow channel, with inert wetted materials for an outstanding chemical resistance.
The SLF3S-1300F is calibrated for water and IPA.
Find a comprehensive kit including this sensor and accessories for standalone operation in the SLF3x Flow Sensor Evaluation Kit.
Content
1x SLF3S-1300F Sensirion liquid flow sensor
Cable not included, software available for standalone operation.
Specifications
| Flow range (water) | 0 - 40 mL/min |
|
Accuracy (water) (whichever error is larger) |
+/- 5% of measured value 0.05 mL/min |
|
Repeatability (water) (whichever error is larger) |
+/- 0.5% of measured value 0.01 mL/min |
| Connection | 1/4-28 UNF |
Further specifications and values for IPA can be found in the datasheets.
Additionally, this sensor offers the following advantages:
- Dimensions: 48 x 15.5 x 8.9 mm
- Highly integrated: Linearized, temperature-compensated, and fully calibrated digital output signal (I2C) from a single chip
- Wide flow range to cover flow rates from µL/min to mL/min
- Easy fluidic connection through 1/4-28 UNF ports
- Fast response time down to 20 ms
- Bidirectional measurement and real-time failure detection
- Wetted materials: Polyphenylene sulfide (PPS), stainless steel 316L, epoxy-based adhesive
- Max. operating pressure: 12 bar
Documentation
The SLF3S series is the new generation of Sensirion liquid flow sensors for low flow rates. With an unrivaled price-performance ratio, these sensors allow for high-precision flow measurements over a wide range of flow rates.
From 0 to 40 mL/min, the SLF3S-1300F offers a short response time below 20 ms and sensitivity down to 0.05 mL/min.
General
Based on Sensirion's proven CMOSens® technology, the new SLF3x sensor series is the result of Sensirion latest product developments. Its simpler design reduces the cost of this sensor, without compromising its performance. Flow rate is measured through the wall of a straight flow channel, with inert wetted materials for an outstanding chemical resistance.
The SLF3S-1300F is calibrated for water and IPA.
Find a comprehensive kit including this sensor and accessories for standalone operation in the SLF3x Flow Sensor Evaluation Kit.
Content
1x SLF3S-1300F Sensirion liquid flow sensor
Cable not included, software available for standalone operation.
Specifications
| Flow range (water) | 0 - 40 mL/min |
|
Accuracy (water) (whichever error is larger) |
+/- 5% of measured value 0.05 mL/min |
|
Repeatability (water) (whichever error is larger) |
+/- 0.5% of measured value 0.01 mL/min |
| Connection | 1/4-28 UNF |
Further specifications and values for IPA can be found in the datasheets.
Additionally, this sensor offers the following advantages:
- Dimensions: 48 x 15.5 x 8.9 mm
- Highly integrated: Linearized, temperature-compensated, and fully calibrated digital output signal (I2C) from a single chip
- Wide flow range to cover flow rates from µL/min to mL/min
- Easy fluidic connection through 1/4-28 UNF ports
- Fast response time down to 20 ms
- Bidirectional measurement and real-time failure detection
- Wetted materials: Polyphenylene sulfide (PPS), stainless steel 316L, epoxy-based adhesive
- Max. operating pressure: 12 bar