This 1/4"-28 fittings connection kit for 1/16" OD tubing is made of PFA (Teflon) and ETFE to ensure its high chemical resistance. Reusable, highly versatile, and compatible with a large range of microfluidic equipment.
This kit contains 10x 1/4"-28 to 1/16" OD fittings and 10x 1/16" OD ferrules.
General
Interface any 1/16" OD tubing and 1/4-28 UNF threaded ports to connect all the elements in your microfluidic system.
Flangeless fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:
- Convenience: Flangeless fittings are easy to use. Just slip the nut and ferrule over the tubing and finger-tighten the assembly into your receiving port. In tests, it is shown that the ideal amount of torque to achieve expected part performance should be approximately 3–4 in-lbs (0.34–0.45 N·m).
- Minimal downtime: Component replacement is quick, taking only a few seconds unlike the significant time required to flange tubing.
- Cost-effectiveness: Repairing a flanged tubing assembly requires a costly flanging tool or the purchase of a complete replacement assembly, including a new length of tubing and a set of fittings. The Flangeless fittings system typically requires only one new ferrule at minimal cost when repairing a connection.
Tip: For the best performances, use these fittings with rigid tubing (PTFE, FEP, PEEK...). Soft-walled tubing such as Tygon or silicon will shrink when compressing the ferrule, leading to leakages and poor holding.
Content
10x Flangeless 1/4-28 PFA nuts for 1/16" OD tubing
10x Flangeless ETFE 1/4-28 ferrules for 1/16" OD tubing
Specifications
Color |
Natural (nut) Blue (ferrule) |
Thread port configuration |
1/4-28 flat-bottom |
Material |
PFE (nut) ETFE (ferrule) |
Max. pressure rating |
138 bar (2000 psi) |
For tubing OD |
1.6 mm (1/16") |
Head style |
Standard knurl |
This 1/4"-28 fittings connection kit for 1/16" OD tubing is made of PFA (Teflon) and ETFE to ensure its high chemical resistance. Reusable, highly versatile, and compatible with a large range of microfluidic equipment.
This kit contains 10x 1/4"-28 to 1/16" OD fittings and 10x 1/16" OD ferrules.
General
Interface any 1/16" OD tubing and 1/4-28 UNF threaded ports to connect all the elements in your microfluidic system.
Flangeless fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:
- Convenience: Flangeless fittings are easy to use. Just slip the nut and ferrule over the tubing and finger-tighten the assembly into your receiving port. In tests, it is shown that the ideal amount of torque to achieve expected part performance should be approximately 3–4 in-lbs (0.34–0.45 N·m).
- Minimal downtime: Component replacement is quick, taking only a few seconds unlike the significant time required to flange tubing.
- Cost-effectiveness: Repairing a flanged tubing assembly requires a costly flanging tool or the purchase of a complete replacement assembly, including a new length of tubing and a set of fittings. The Flangeless fittings system typically requires only one new ferrule at minimal cost when repairing a connection.
Tip: For the best performances, use these fittings with rigid tubing (PTFE, FEP, PEEK...). Soft-walled tubing such as Tygon or silicon will shrink when compressing the ferrule, leading to leakages and poor holding.
Content
10x Flangeless 1/4-28 PFA nuts for 1/16" OD tubing
10x Flangeless ETFE 1/4-28 ferrules for 1/16" OD tubing
Specifications
Color |
Natural (nut) Blue (ferrule) |
Thread port configuration |
1/4-28 flat-bottom |
Material |
PFE (nut) ETFE (ferrule) |
Max. pressure rating |
138 bar (2000 psi) |
For tubing OD |
1.6 mm (1/16") |
Head style |
Standard knurl |