Microfluidic Luer Lock Check Valve (pack of 10)
SKU:
LVF-KMM-13
MSRP:
Was:
Now:
54.00€
(You save
)
One-way check valve with low cracking pressure (12 mbar) to prevent backflow and for recirculation setups.
General
A check valve for recirculation setup or protection of your equipment, for use in your microfluidic system. This valve is designed to only allow forward flow at <12 mbar threshold pressures and to negate both back-flow and diffusion when in a closed state.
Content
10x Female to Male Luer Lock check-valve
Specifications
Material | Styrene acrylonitrile resin |
Cracking Pressure | 12 mbar (20 mbar after 6 bar back pressure for 15 min) |
Maximum Back Pressure | 6 bar |
Burst Pressure | 6 bar |
Maximum Retrograde Leak Rate | 0.1 mL/h (at flow rate 0.5 mL/h) |
Priming Volume | ~ 0.15 mL |
Sterilization | Ethylene Oxide Gamma irradiation |
products.product_description_title
+
One-way check valve with low cracking pressure (12 mbar) to prevent backflow and for recirculation setups.
General
A check valve for recirculation setup or protection of your equipment, for use in your microfluidic system. This valve is designed to only allow forward flow at <12 mbar threshold pressures and to negate both back-flow and diffusion when in a closed state.
Content
10x Female to Male Luer Lock check-valve
Specifications
Material | Styrene acrylonitrile resin |
Cracking Pressure | 12 mbar (20 mbar after 6 bar back pressure for 15 min) |
Maximum Back Pressure | 6 bar |
Burst Pressure | 6 bar |
Maximum Retrograde Leak Rate | 0.1 mL/h (at flow rate 0.5 mL/h) |
Priming Volume | ~ 0.15 mL |
Sterilization | Ethylene Oxide Gamma irradiation |
products.specification
+
short_description
One-way check valve with low cracking pressure (12 mbar) to prevent backflow and for recirculation setups.