One-way check valve with low cracking pressure (12 mbar) to prevent backflow and for recirculation setups.
General
A check valve for recirculation setup or protection of your equipment, for use in your microfluidic system. This valve is designed to only allow forward flow at <12 mbar threshold pressures and to negate both back-flow and diffusion when in a closed state.
Content
10x Female to Male Luer Lock check-valve
Specifications
| Material |
Styrene acrylonitrile resin |
| Cracking Pressure |
12 mbar
(20 mbar after 6 bar back pressure for 15 min) |
| Maximum Back Pressure |
6 bar |
| Burst Pressure |
6 bar |
| Maximum Retrograde Leak Rate |
0.1 mL/h (at flow rate 0.5 mL/h) |
| Priming Volume |
~ 0.15 mL |
| Sterilization |
Ethylene Oxide
Gamma irradiation |
Documentation
Check the chemical compatibilities for this product here: Styrene acrylonitrile resin - Chemical Compatibility Chart
