PHD Ultra OEM Syringe Pump
Rated 3.5/5 based on 11 customer reviews

PHD Ultra OEM Syringe Pump

The PHD Ultra OEM syringe pump is the solution for your most demanding applications. PHD Ultra pumps have superior mechanical drive mechanism and syringe holding mechanics to achieve the highest performance of any syringe pump. Covering a flow range from 1.56 pL/min up to 216 mL/min with an unrivaled accuracy, the OEM series is compact, easy to integrate to your microfluidic setup, and holds syringes ranging from 0.5 µL to 200 mL.
The pump is available in four configurations: standard, push/pull, high pressure and ultra high pressure.
Available within 3-4 weeks
€3,657.00
The PHD Ultra OEM syringe pump is the solution for your most demanding applications. PHD Ultra pumps have superior mechanical drive mechanism and syringe holding mechanics to achieve the highest performance of any syringe pump. Covering a flow range from 1.56 pL/min up to 216 mL/min with an unrivaled accuracy, the OEM series is compact, easy to integrate to your microfluidic setup, and holds syringes ranging from 0.5 µL to 200 mL.
The pump is available in four configurations: standard, push/pull, high pressure and ultra high pressure.

Harvard apparatus microfluidic syringe pump

 

PHD Ultra OEM

Without its built-in user interface, PHD Ultra OEM syringe pump provides the same performances than its standalone equivalent, with a smaller footprint. Smooth flow rates from 1.56 pL/min to 216 mL/min are delivered with an unrivaled accuracy (down to 0.25%). The superior mechanical drive and syringe holding mechanism ensure the highest performances. 

  • Infusion and withdrawal
  • Small footprint: 29.8 x 14 x 16.5 cm (11.75 x 5.5 x 6.5 in)
  • Holds plastic, glass or stainless steel syringe
  • Fully programmable from the FlowControl software (in option) or with command lines
  • Advanced connectivity: RS-232 and USB serial inputs, RS-485 or TTL interfaces
  • 2-year warranty

Four types of PHD Ultra pumps have been developed to meet every requirement:

PHD Ultra Standard PHD Ultra Push/Pull PHD Ultra 4400 PHD Ultra XF
Application Low pressure, microfluidics
For continuous flow applications (cell culture, etc.) High pressure with stainless steel syringes Ultra high pressure
Pump function Infuse/Withdraw Push/Pull Infuse/Withdraw Infuse/Withdraw
Number of channels 2 4 1 4
Syringe size

0.5 μL up to 140 mL

0.5 μL up to 140 mL

0.5 μL up to 140 mL

20 mL up to 200 mL

Flow range 1.56 pL/min up to 216 mL/min 1.56 pL/min up to 216 mL/min 1.56 pL/min up to 216 mL/min 50.7 nL/min up to 144.08 mL/min
Accuracy ±0.25% ±0.25% ±0.35% ±0.5%
Max. linear force 34 kg (75 lb) @ 100% Force Selection 34 kg (75 lb) @ 100% Force Selection 90.7 kg (200 lb) @ 100% Force Selection 453.6 kg (1000 lb) @ 100% Force Selection

Harvard Apparatus has developed LabVIEW drivers for their pumps, and each pump module can be controlled by ASCII command lines. RS-485 in and out connection ports allow to daisy-chain several pumps, making it easy to control all the pumps from a single USB connection to your computer.

The Harvard Apparatus FlowControl software can control both an individual syringe pump as well as multiple pumps connected in a daisy chain or USB hub. Users can enter syringe data, flow rate and flow direction (infusion or withdrawal). The flow rate and flow direction can both by modified while the pump is running. The software allows you to create, edit, save, and recall simple to complex methods for controlling individual pumps and multiple pumps. 

 

Specifications

PHD Ultra Standard PHD Ultra Push/Pull PHD Ultra 4400 PHD Ultra XF
Type

Microprocessor multiple syringe, infusion/withdrawal programmable

Microprocessor four syringe, push/pull infusion/withdrawal

Microprocessor single syringe infusion/withdrawal programmable

Microprocessor multiple syringe, infusion/withdrawal programmable

Accuracy

±0.25%

±0.25%

±0.35%

±0.5%
Syringe
  • Type: Plastic, glass or stainless steel
  • Size: 0.5 μL to 140 mL
  • Type: Plastic, glass or stainless steel
  • Size: 0.5 μL to 140 mL
  • Type: Plastic, glass or stainless steel
  • Size: 0.5 μL to 140 mL
  • Type: Plastic, glass or stainless steel
  • Size: 20 mL to 200 mL
Flow Rate 1.56 pL/min up to 216 mL/min 1.56 pL/min up to 216 mL/min 1.56 pL/min up to 216 mL/min 50.7 nL/min up to 144.08 mL/min
Temperature and humidity

4 °C to 40 °C

20% to 80% RH, non condensing

4 °C to 40 °C

20% to 80% RH, non condensing

4 °C to 40 °C

20% to 80% RH, non condensing

4 °C to 40 °C

20% to 80% RH, non condensing

Connectors
  • RS-232: 9-pin D-Sub Connector
  • RS-485: IEEE-1394, 6 position
  • USB: Type B
  • I/O & TTL: 15-pin D-Sub Connector
  • RS-232: 9-pin D-Sub Connector
  • RS-485: IEEE-1394, 6 position
  • USB: Type B
  • I/O & TTL: 15-pin D-Sub Connector
  • RS-232: 9-pin D-Sub Connector
  • RS-485: IEEE-1394, 6 position
  • USB: Type B
  • I/O & TTL: 15-pin D-Sub Connector
  • RS-232: 9-pin D-Sub Connector
  • RS-485: IEEE-1394, 6 position
  • USB: Type B
  • I/O & TTL: 15-pin D-Sub Connector
Drive Motor

0.9° Stepper Motor

0.9° Stepper Motor 1.8° Stepper Motor 1.8° Stepper Motor
Motor Drive Control

Microprocessor with 1/16 microstepping

  • Min. step rate: 27.5 sec/ustep
  • Max. step rate: 26 µsec/µstep

 

  • Min. pusher travel rate: 0.18 µm/min
  • Max. pusher travel rate: 190.8 mm/min

Microprocessor with 1/16 microstepping

  • Min. step rate: 27.5 sec/ustep
  • Max. step rate: 26 µsec/µstep

 

  • Min. pusher travel rate: 0.18 µm/min
  • Max. pusher travel rate: 190.8 mm/min

Microprocessor with 1/16 microstepping

  • Min. step rate: 27.5 sec/ustep
  • Max. step rate: 26 µsec/µstep

 

  • Min. pusher travel rate: 0.36 µm/min
  • Max. pusher travel rate: 190.8 mm/min

Microprocessor with 1/16 microstepping

  • Min. step rate: 27.5 sec/ustep
  • Max. step rate: 52 µsec/µstep

 

  • Min. pusher travel rate: 0.18 µm/min
  • Max. pusher travel rate: 91.637 mm/min
Number of Microsteps per one rev of Lead Screw

12800

12800 6400 12800
Average Linear Force 34 kg (75 lb) @ 100% Force Selection 34 kg (75 lb) @ 100% Force Selection 90.7 kg (200 lb) @ 100% Force Selection 453.6 kg (1000 lb) @ 100% Force Selection
Input Power 50 W, 0.5 A fuse 50 W, 0.5 A fuse 50 W, 0.5 A fuse 50 W, 0.5 A fuse
Power Supply 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz 100-240 VAC, 50/60 Hz
Dimensions (H x W x D)

29.8 x 14 x 16.75 cm (11.75 x 5.5 x 6.5 in)

29.8 x 14 x 16.75 cm (11.75 x 5.5 x 6.5 in) 29.8 x 14 x 16.75 cm (11.75 x 5.5 x 6.5 in) 29.8 x 14 x 16.75 cm (11.75 x 5.5 x 6.5 in)
Weight 4.5 kg (10 lb) 5.1 kg (11.2 lb) 5.3 kg (11.7 lb) 4.5 kg (10 lb)
Regulatory Certifications CE, UL, CSA, CB Scheme, EU RoHS CE, UL, CSA, CB Scheme, EU RoHS CE, UL, CSA, CB Scheme, EU RoHS CE, UL, CSA, CB Scheme, EU RoHS

Payment Terms

You can either order and pay via credit card or invoice (through a purchase order). Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!

Credit card 

  • Add your products to the cart
  • In the cart page, click on Proceed to Checkout
  • Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
  • That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.

Invoice

  • Add your products to the cart
  • In the website header, click on Request a Quote
  • Fill in the required informations, then click on Submit Quote
  • Our team will send you a quote shortly
  • After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
  • Our team will complete your purchase and send you the invoice!

If you wish to pay in USD, AUD or GBP, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.

 

Worldwide shipping

We ship worldwide from our warehouse in France.

The shipping charges are calculated based on the weight of the package and the country of destination: you can estimate the shipping cost on the cart page. We try to offer you the best shipping rates and services, shipping all our orders through DHL Express. Generally, your order reaches your lab in only 2 to 3 days after we send it, no matter the destination! 

Please note that our shipping incoterms are DAP (Delivered At Place). Please contact us if you prefer using your own courrier account or have any question!

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)