This pressure relief valve prevents system over-pressurization by diverting the flow when inline pressure exceeds 5 psi.
General
Pressure relief valves ensure the protection of your components by automatically redirecting the flow when the system's pressure exceeds 5 psi. They prevent damage to peristaltic pumps, syringe pumps, or your microfluidic chip.
The included fittings connect the pressure relief valve to 1/16" OD rigid tubing. For excellent chemical resistance, the pressure regulator is made of PEEK. The fittings are made of acetal and ETFE, and the valve tee is manufactured in PCTFE.
Content
1x Pressure relief valve tee in PCTFE
1x Back pressure regulator
3x Flangeless fitting for 1/16” OD tubing
Specifications
| Swept Volume |
148 µL |
| Thru hole |
0.50 mm (0.020") |
| Material |
PEEK |
| Pressure Setting |
0.3 bar (5 psi) |
| Thread port configuration |
1/4-28 flat-bottom |
| Recommended rigid tubing OD |
1.6 mm (1/16") |
