-
Choose Options Darwin Microfluidics
Aluminum Foil Discs for PDMS Casting (pack of 1000)Aluminum foil discs are useful for casting PDMS on silicon wafers. Available in 3 diameters: 130 mm for 4" wafers, 100 mm for 3" wafers, 80 mm for 2" wafers. General When pouring PDMS mix into a silicon mold placed in a Petri dish, you may waste a lot of...66.00€ - 114.00€ -
Add to Cart The item has been added Eden Tech
Luer Connector KitFlexdym devices are designed to connect to microfluidic syringes or pressure pumps through luer or olive connectors, which are provided in the kit. Each kit contains 10 sets of luers and 50 cytotoxicity-tested o-ring stickers. The compact design of the...35.00€ -
Choose Options Sensirion
Molex Cables for Sensirion SLF3x SensorsThese Molex cables allow you to connect Sensirion SLF3x sensors either to Sensirion SCC1 cables or to your custom setup. The Molex-to-M8 cable is designed for connecting SLF3x-series sensors to SCC1 cables, while the Molex-to-pigtail version enables...20.00€ - 38.00€ -
Choose Options New Era Pump Systems
NE-8000 SyringeONE:200 High Pressure Programmable Syringe PumpThe NE-8000 SyringeONE:200 is a single-channel programmable syringe pump for high pressures. In this version, the SyringeONE:200 can generate flow rates up to 166.7 mL/min, and delivers the highest forces of all New Era pumps. The SyringeONE:200 pump is...2,774.00€ -
Add to Cart The item has been added Sensirion
SLF3S-4000B Flow Sensor Evaluation KitThe SLF3S-4000B Evaluation Kit is meant to provide you with a complete setup, including an SLF3S-4000B sensor and a complete set of accessories to evaluate its performance. Monitor your flow rate using the Windows software, and export your data for...248.00€ -
Add to Cart The item has been added Micronit
Teflon Plugs for Fluidic Connect Pro Chip Holder (pack of 10)A set of 10 PTFE plugs to block any inlet/outlet. For use in combination with the Fluidic Connect Pro chip holder and 1/16" OD tubing. General These Teflon plugs block the flow from or to channel inlets/outlets of the Fluidic Connect Pro chip holder. The...43.00€ -
Choose Options Masterflex
Tygon E-Lab (E-3603) Extension Tubing (100 ft / 30.4 m)Tygon® E-Lab(E-3603) tubing is an inexpensive solution for all types of general laboratory applications. Its low gas permeability ensures easy and consistent flow monitoring. Inside, a smooth, non-aging and non-oxidizing inner bore prevents build-up of...187.00€ - 191.00€ -
Add to Cart The item has been added Micronit
Fluidic Connect Pro PEEK Connection KitA kit containing 5x ferrules for 1/16" OD tubing and 5m PEEK tubing to create a secure connection between your pump and the Fluidic Connect Pro chip holder from Micronit. General Use this kit with your Fluidic Connect Pro chip holder. The ferrules can...199.00€ -
Add to Cart The item has been added PreSens
Optical Flow-Through Oxygen SensorThe O2 optical flow-through sensor has been designed for real-time monitoring of oxygen levels in perfusion systems. It is made of stainless steel and has connectors for 1/16" steel tubing. The FTCM-PSt7 features a small inner volume of 2...513.00€ -
Add to Cart The item has been added microfluidic ChipShop
Scaffold & 3D Culture Integration Chip - Mini LuerThe Fluidic 1380 Scaffold & 3D Culture Integration Chip manufactured by ChipShop features a central compartment for sample integration. The inlets and outlets with integrated Mini Luer connections ensure leak-free junctions to the tubing...51.50€ -
Choose Options Little Things Factory
T-25 Multi-size Droplet Generator - Glass ChipY shaped multi-size droplet generator in glass for oil-in-water generation, T-25 model. Available with standard 1/4-28 ports or direct through holes. General These chips are convenient, cost-effective, and reliable to generate monodisperse bubbles...130.00€ - 395.00€ -
Choose Options Bürkert
2/2 Way NO Whisper Valve Type 6724Bürkert Whisper normally opened valve 6724 2/2 way NO combines high chemical resistance, very fast and silent switching (3 ms at 30 dB(A)) and high back pressure tightness in a compact design of only 8.9 mm width. This valve is either available...112.00€ - 131.00€ -
Choose Options InSphero
InSphero - Akura 384 Spheroid MicroplateThe Akura™ 384-well plate facilitates the generation, long-term cultivation, and analysis of 3D cell models. This simple and flexible platform is also compatible with automation systems. The unique well design ensures high reproducibility,...515.00€ - 1,285.00€ -
Choose Options
MicroBarb Peristaltic Tubing to 1/4-28 Adapters (pack of 25)Easily connect your Tygon® tubing to any 1/4"-28 UNF fitting using the MicroBarb adapter from Diba. When working with ISMATEC peristaltic pumps, you can seamlessly extend your peristaltic tubing and securely connect any rigid or soft-walled...240.80€ -
Choose Options New Era Pump Systems
New Era Pusher Block for 50 & 100 mL Glass SyringesA replacement pusher block for 50 and 100 mL glass syringes to fit perfectly into New Era syringe pumps. General This pusher block allows large glass syringes to sit properly on the syringe holder block of New Era syringe pumps. Easily replace...2.20€ - 14.10€ -
Add to Cart The item has been added IDEX Health & Science
Pressure Relief Valve (5 psi)This pressure relief valve prevents system over-pressurization by diverting the flow when inline pressure exceeds 5 psi. General Pressure relief valves ensure the protection of your components by automatically redirecting the flow when the system's...236.30€ -
Add to Cart The item has been added Little Things Factory
RS T Baffle Mixer - Glass ChipThis RS T baffle micromixer is designed for the easy and high throughput generation of nanoparticles or for the efficient mixing of up to 3 solutions. Made of glass, it comes with its 1/4-28 connection bar. General The RS T micromixer is a...825.00€ -
Choose Options Advanced Microfluidics
RVM - OEM Switch Microfluidic Rotary ValveThe RVM microfluidics rotary Switch valve is a precise OEM low-pressure electric rotary valve designed for automated microfluidic applications. The RVM microfluidics rotary valve series, renowned for its small channels and ultra-precise positioning...842.30€ - 901.90€ -
Choose Options Sensirion
SLI Liquid Flow SensorSensirion SLI liquid flow sensor is a high-precision standalone solution to accurately measure low flow rates of liquids based on water or hydrocarbons. Its wide flow range, its short response time of 40 ms, and its sensitivity down to < 1 µL/min make it...960.00€ -
Choose Options Advanced Microfluidics
SPM+ - Industrial OEM High Volume Syringe PumpThe SPM+ OEM sequential microdispenser is a high-volume version of the SPM, designed for applications that require precise dispensing of larger liquid volumes.It combines accurate dosing, low pulsation flow, and the flexibility of handling multiple...2,388.00€ - 3,015.00€ -
Add to Cart The item has been added Eden Tech
Sublym Hot Embossing Machine for ThermoplasticsDiscover this user friendly and compact system for thermoplastic molding! The Sublym is a great alternative to PDMS-soft lithography for microfluidic devices. It will dramatically ease your work when fabricating microfluidic chips: Sublym simplifies the...3,850.00€ -
Choose Options Bürkert
3/2 Way Bistable Whisper Valve Type 6724Bürkert Whisper valve 6724 3/2 way bistable combines high chemical resistance, very fast and silent switching (3 ms at 30 dB(A)) and high back pressure tightness in a compact design of only 8.9 mm width. This valve is either available with a...118.00€ - 163.00€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Headless PPS Fittings + ETFE Ferrules 1/4-28 to 1/16" OD (pack of 10)This convenient headless 1/4-28 fitting for 1/16" OD tubing is made of a PPS nut and an ETFE ferrule to ensure its high chemical resistance. Sold in packs of 10 fittings. General A set of PPS fittings with ETFE ferrules to interface any 1/16" OD rigid...98.90€ -
Choose Options Harvard Apparatus
Harvard Apparatus Pump Controller (HAPC)The Harvard Apparatus Pump Controller (HAPC) is a standalone controller for the operation of up to four pumping channels, either separately or simultaneously. Through its touch screen interface, the HAPC provides accurate feedback on the status of each...3,228.00€ - 6,099.00€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
