-
Choose Options Sensirion
SLF3S-0600F Flow Sensor Evaluation KitThe SLF3S-0600F Evaluation Kit is meant to provide you with a complete setup, including an SLF3S-0600F sensor and a complete set of accessories to evaluate its performance. Monitor your flow rate using the Windows software, and export your data for...248.00€ -
Choose Options Bürkert
2/2 Way NC Whisper Valve Type 6724Bürkert Whisper normally closed valve 6724 2/2 NC combines high chemical resistance, very fast and silent switching (3 ms at 30 dB(A)) and high back pressure tightness in a compact design of only 8.9 mm width. This valve is either available...78.90€ - 131.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Fittings Male Luer Lock Adapter KitEasily connect male ¼"-28 threaded fittings with Luer Lock elements using these ETFE male Luer Lock adapters. General Create a secure and reliable connection between a female Luer or Luer Lock port and a male 1/4-28 fitting. Manufactured in ETFE...129.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 VacuTight Fitting for 1/16” OD (pack of 10)VacuTight 1/4-28 fittings to maintain 1/16" OD tubing under vacuum and low pressure. Sold by packs of 10 units. General These VacuTight fittings strongly hold 1/16" OD rigid tubing into 1/4-28 female ports. They provide airtight and dependable...124.70€ -
Add to Cart The item has been added microfluidic ChipShop
Female Mini Luer Flat Caps (pack of 10)These Fluidic 1230 flat caps seal female Mini Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Mini Luer interfaces with a minimal footprint. Content 10x Female mini Luer flat caps Specifications Documentation ? Female...19.00€ -
Choose Options New Era Pump Systems
SyringeONE OEM Syringe PumpThe OEM version of the SyringeONE pump. Without its built-in user interface, this single-channel pump is more compact than its standard version while keeping the same performances. Various options available for low flow rates or high pressure, with...564.60€ - 1,221.40€ -
Add to Cart The item has been added Emulseo
Fluo-Break Emulsion BreakerThe Fluo-Break solution is an emulsion breaker from Emulseo. It is specifically developed to disrupt droplets that were stabilized with FluoSurf. Supplied in a glass vial of 10 mL. General The emulsion breaker Fluo-Break from Emulseo is a clear...155.00€ -
Choose Options Darwin Microfluidics
Silicon Wafers for Soft-Lithography (pack of 25)Silicon wafers are widely used for soft-lithography processes and PDMS molding. One side mirror polished, 525 µm thickness, 3 diameters available: 100 mm (4"), 76.2 mm (3"), 50.8 mm (2"). General Our team has chosen the best wafer specifications for soft...288.00€ - 455.00€ -
Choose Options Bartels Mikrotechnik
SLF3x Liquid Flow Sensor for Bartels MicropumpsSensirion SLF3S-0600F and SLF3S-1300F liquid flow sensors are natively integrated with the Bartels environment. Just connect the sensor to the Multiboard2, and start monitoring your flow rate easily! Available in different versions according to the flow...238.00€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Fittings 10-32 Kit for 1/16" OD TubingA kit of PEEK fittings for connecting 1/16" OD rigid tubing with 10-32 threaded ports. These fittings are reusable and can be used for the distribution of both liquids and pneumatic pressure (i.e. from a pressure source). General Connect 1/16″ OD rigid...119.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-Driver Pump DriverBartels mp-Driver controller is a compact pump driver for BP7 and mp6 micropumps. It enables integration into system electronics or on a PCB. Pump parameters can also be adjusted easily (frequency, amplitude, signal shape) using the mp-Multiboard2...67.00€ -
Choose Options Advanced Microfluidics
RVM - OEM Distribution Microfluidic Rotary ValveThe RVM microfluidics distribution rotary valve is a precise OEM low-pressure electric rotary valve designed for automated microfluidic applications. The RVM microfluidics rotary valve series, renowned for its small channels and ultra-precise positioning...962.80€ - 1,216.60€ -
Add to Cart The item has been added IDEX Health & Science
Flangeless Ferrule ETFE 1/4"-28 for 2mm OD (pack of 10)Reusable ferrules manufactured in Tefzel (ETFE) for high chemical compatibility with solvents. Compatible with 1/4-28 UNF Flangeless fittings. These flangeless ferrules are excellent for connecting most rigid or semi-rigid tubes, including tubing...19.20€ -
Add to Cart The item has been added Micronit
Fittings Kit for Fluidic Connect 4515 Chip HolderA kit of 6-32 fittings and ferrules to interface your 1/16" OD tubing with the Fluidic Connect 4515 chip holder from Micronit. General Use these fittings and ferrules to connect your 1/16" OD stainless steel or fluoropolymer tubing (PTFE, ETFE, PEEK, etc...229.00€ -
Add to Cart The item has been added Advanced Microfluidics
Advanced Microfluidics Connectors and Tubing KitA kit of connectors and tubing for Advanced Microfluidics devices. Includes 12x flat-bottom fittings (nut + ferrule), and 1.5 m of 1/16" OD x 0.5 mm ID PTFE tubing. General Designed for optimal use with Advanced Microfluidics instruments, this kit...214.80€ -
Choose Options ISMATEC
Reglo ICC (Independent Channel Control) PumpControl independently the direction and speed of up to four independent channels using the Reglo ICC peristaltic pump, each with its own program: start, stop, dispense, reverse, aspirate, and calibrate. The independent channel calibration ensures high...3,450.00€ - 5,570.00€ -
Choose Options microfluidic ChipShop
Spheroid Chip - Mini LuerThe spheroid chip Fluidic 1407 manufactured by ChipShop can be used for the separation of pre-cultivated spheroids or the formation of spheroids and their cultivation as well as their imaging on-chip. The inlets and outlets with integrated mini Luer...42.20€ -
Choose Options microfluidic ChipShop
Droplet Generator & Storage Chip - Mini LuerThe Fluidic 719 Droplet Generator Chip by Microfluidic ChipShop features a droplet production unit and a patterned storage channel for individual droplet collection and optical microscopic observation. Made in Topas (COC, cyclic olefin copolymer) or...42.20€ -
Add to Cart The item has been added IDEX Health & Science
Female Luer to Female 10-32 Coned Adapters (pack of 5)ETFE adapter with female Luer to female 10-32 coned threads for general lab use. Sold by pack of 5 units. General Luer adapters are designed to create quick connections between standard threads. This adapter has a female Luer to female 10-32 coned thread...30.60€ -
Choose Options Emulseo
FluoSurf-O Nonionic Surfactant in Fluorinated OilFluoSurf is an emulsion stabilizer in fluorinated oil specifically formulated for droplet-based microfluidic applications, such as single-cell analysis. Biocompatible, it is highly stable even with pH or temperature variations, allowing the production of...220.00€ - 2,454.00€ -
Add to Cart The item has been added ELVEFLOW
PDMS Microfluidic Chip Cutting Mat KitThe perfect tool for any precise PDMS cutting/drilling work. General A simple cutting mat for general lab use when manufacturing PDMS chips. Drilling tubing connection holes in PDMS devices. Cutting PDMS chips to the desired dimensions...35.00€ -
Add to Cart The item has been added Emulseo
Fluo-ST3 Hydrophobic Surface TreatmentThe Fluo-ST3 surface treatment by Emulseo enhances the hydrophobicity of microfluidic chip channel walls, improving aqueous droplet performance and stability in fluorinated oils during droplet generation experiments. Supplied in a vial, volume of 8 mL...74.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 Flat-Bottom Caps (pack of 10)These 1/4-28 flat-bottom caps will safely seal your fittings when unused. Sold in packs of 10 caps. General Manufactured in ETFE, these female 1/4-28 caps are meant to close off unused tubing tips for safe transportation or storage. They can be screwed...41.90€ -
Add to Cart The item has been added ELVEFLOW
Microfluidic Fittings Luer Lock KitA set of Luer Lock connectors and plugs for liquid or gas tubing connections. General This kit contains Nylon plugs and connectors to interface a male Luer or Luer Lock outlet with a 3/32" ID soft-walled tubing (e.g. on the Elveflow OB1)...49.00€
EXTENDO 944X
EXTENDO 944X Featuring several next gen optimizations, the Extendo 944X telehandler is powered by a standard
