-
Add to Cart The item has been added microfluidic ChipShop
Female Luer Flat Caps (pack of 10)These Fluidic 1231 flat caps are made to seal female Luer interfaces. Sold in packs of 10 caps. General These TPE caps allow sealing Luer interfaces without additional height to the microfluidic...19.00€ -
Choose Options Masterflex
Tygon E-LFL Extension Tubing (100 ft / 30.4 m)Tygon® E-LFL tubing is the choice you can rely on when it comes to peristaltic pump applications. It offers longer tubing life compared to other Tygon® formulations, with a smooth inner bore. This...248.00€ - 264.00€ -
Choose Options IDEX Health & Science
Micro-Splitter ValveThe Micro-Splitter Valve made in PEEK has a 1/4-28 Flat-Bottom thread configuration. Included fittings accept 1/16" OD tubing. This assembly comes with 3x 1/4-28 Flangeless fittings (P-235)...131.20€ -
Choose Options ELVEFLOW
BFS Microfluidic Coriolis Mass Flow SensorThese mass flow sensors are based on the Coriolis principle which allows measuring the flow independently from the type of fluids (gases, water, oil, alcohol...). They are characterized by excellent...5,550.00€ - 6,985.00€ -
Add to Cart The item has been added IDEX Health & Science
1/4-28 One-Piece Super Flangeless Fitting for 1/16” OD (pack of 10)This One-Piece Super Flangeless 1/4-28 fitting holds 1/16" OD tubing for high-pressure applications. Sold by packs of 10 fittings. General These One-Piece Super Flangeless fittings strongly connect...156.00€ -
Choose Options Masterflex
2-Stop Tygon E-Lab (E-3603) Pump Tubing (pack of 12)Tygon® E-Lab(E-3603) tubing is an inexpensive solution for all types of general laboratory applications. Its low gas permeability ensures easy and consistent flow monitoring. Inside, a smooth,...135.00€ - 143.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-advance Evaluation SetThe mp-advance Evaluation Set is the most complete bundle to use Bartels product line for a wide range of applications. The set contains 1x mp-Multiboard2 controller with 4 driver chips (Lowdriver,...2,058.00€ -
Choose Options Masterflex
PharMed BPT Extension Tubing (100 ft / 30.4 m)PharMed® BPT tubing is specially designed to withstand a wide range of environments and temperatures. It has up to 10,000 hours of tubing life, is resistant to ozone and UV radiation, is noncytotoxic...286.00€ - 289.00€ -
Choose Options microfluidic ChipShop
Male Mini Luer Fluid Connectors - Twins (pack of 10)The Fluidic 332 Twin Male Mini Luer Fluid Connectors by Microfluidic ChipShop are designed to seamlessly connect your tubings to adjacent ChipShop mini Luer ports. Suitable for silicone or flexible...19.00€ -
Choose Options microfluidic ChipShop
Droplet Generator with Storage Units - 74 µm nozzle Fluidic 488The Fluidic 488 Microfluidic Device by Microfluidic ChipShop integrates a droplet generator and a chamber with small traps for storing and capturing droplets, enabling further analysis. The chip is...42.20€ -
Add to Cart The item has been added IDEX Health & Science
Fingertight Double-Wing 10-32 Coned Fitting for 1/16" OD Tubing (pack of 10)These double wing Fingertight fittings comprise a nut and a ferrule, manufactured in PEEK, for 1/16" OD tubing. Available in a pack of 10 units. General Fingertight fitting with a winged nut head to...92.20€ -
Choose Options Masterflex
Solva Extension Tubing (50 ft / 15.2 m)Solva™ tubing was designed to resist embrittlement and swelling due to hydrocarbon exposure, making it ideal for transporting hydrocarbons, petroleum products, and distillates. Its thermoplastic,...85.10€ -
Choose Options New Era Pump Systems
NE-1002X SyringeONE:Microfluidics Programmable Syringe PumpThe NE-1002X SyringeONE:Microfluidics is one of the smoothest single-channel syringe pumps for microfluidics applications: in this low flow rate version, this syringe pump goes down to 0.13 pL/min...1,330.60€ -
Add to Cart The item has been added IDEX Health & Science
10-32 Coned PEEK Fittings for NanoPort (pack of 10)These 10-32 coned fittings for 1/16" OD tubing are made of biocompatible PEEK and are part of the NanoPort kit. Sold in packs of 10. General 10-32 coned port configuration Short headless...92.20€ -
Add to Cart The item has been added ELVEFLOW
Kit Fittings Starter Pack Push-in for OB1 Mk4Complete kit with all the fittings and connectors to get started out of the box with the Elveflow OB1 Mk4 controller. Reservoirs not included. General A toolbox kit with all the elements to connect...730.00€ -
Choose Options Masterflex
L/S Chem-Durance Bio Pump Tubing (15.2 m)Masterflex Chem-Durance Bio offers excellent chemical compatibility over a wide range of chemicals, along with long life for peristaltic pumping. Compatible with any pump heads accepting L/S tubing,...286.00€ - 893.00€ -
Add to Cart The item has been added microfluidic ChipShop
ChipShop 1/16“ OD Capillary PEEK TubingThis 1/16“ OD PEEK tubing from ChipShop is used to interface their microfluidic chips. General This capillary PEEK tubing is suited for various applications to interface ChipShop chips. It can be...34.30€ -
Add to Cart The item has been added BFlow
Male Luer to Barbed ConnectorUse this Luer lock connector to interface silicone tubing with your medium reservoir. General This male Luer Lock to barbed connector allows you to connect your silicone tubing with your medium...50.00€ -
Add to Cart The item has been added Bartels Mikrotechnik
mp-basic Evaluation SetThe mp-basic Evaluation Set is the easiest and most efficient way to try out Bartels micropumps. It includes the mp-Multiboard2 which can be operated simply from the provided software. The set...1,029.00€ -
Add to Cart The item has been added IDEX Health & Science
NanoTight Sleeves 1/16" OD for 275-315 µm OD Tubing (pack of 10)NanoTight sleeves are designed to adapt 275 to 315 µm OD capillary tubing to 1/16" OD connectors. Carefully manufactured in highly-inert FEP fluoropolymer (an excellent alternative to PTFE), they fit...35.20€ -
Choose Options Masterflex
L/S Tygon E-Lab (E-3603) Pump Tubing (15.2 m)Masterflex Tygon E-Lab is an economical tubing for general lab transfer applications. Compatible with any pump heads accepting L/S tubing, 15.2 m / 50 ft per roll. General Masterflex Tygon E-Lab...77.70€ - 386.00€ -
Choose Options microfluidic ChipShop
Organ-on-a-Chip - Cross-flow membrane w/ Open Chamber- Mini LuerThis open version of Fluidic 653 Organ-on-a-Chip features two distinct culture chambers, accessible via multiple inlets and outlets, allowing co-culture of various cell types within two separate...103.30€ -
Sale
Add to Cart The item has been added Darwin Microfluidics
PDMS Hardener for MicrofluidicsFabricate your microfluidics chips with ease with our PDMS hardener. Specially formulated to work with common elastomers, this PDMS hardener enables consistent, high-quality fabrication of PDMS...Now: 280.00€Was: 455.00€ -
Add to Cart The item has been added Darwin Microfluidics
10-32 UNF to Female Luer Adapters (pack of 25)A pack of 10-32 UNF to Luer adapters in Nylon. Pack of 25 units. General 10-32 UNF to Luer adapters allow for easy interfacing between two port types. Manufactured in Nylon, these connectors can be...44.90€
Bartels Mikrotechnik
mp-Lowdriver Pump Driver
67.00€
