BT100-1L Multichannel (4-24) Peristaltic Pump
- Product SKU: LG-BT100-1L-A-EU/DG-4-A
- Category: Longer, Peristaltic pumps, Peristaltic Pumps Systems & Drives, Pumps & Flow Controllers
A precision peristaltic pump with 4 up to 24 parallel channels from 2 µL/min. A graphic LCD screen displays either rpm or flow and facilitates quick and easy control of the pump.
Silicone tubing is included with each pump channel.
This peristaltic pump allows the control of up to 24 channels simultaneously, depending on the chosen pump head.
- Delivers flow rates between 2 µL/min and 366.7 mL/min
- Pump heads can operate with 10 rollers (low flow rate version) to deliver up to 32 mL/min per channel or with 6 rollers for up to 48 mL/min per channel.
- High output torque allows the operation of up to 24 simultaneous channels, depending on the pump head
- Graphic LCD displays the pump parameters and running state, including the flow rate, which can be calibrated with high accuracy.
- Versatile control options: directly through graphic LCD, through external signals, or with an RS485 interface
- Automatic saving of running parameters.
Tip: More rollers mean less pulsatility at low flow rates: if you work below 5 mL/min, choose the 10-roller DG pump head to get the best accuracy and repeatability.
Silicone tubing included with each pump channel:
- DG: 3-stop 1*1 mm (1 mm ID x 3 mm OD) and 2*1 mm (2 mm ID x 4 mm OD)
- YZ1515X or YZII15: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- YZ2515X or YZII25: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
- DG15-24: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- DG15-28 or DG15-48: 13# (0.8 mm ID x 4.0 mm OD and 14# (1.6 mm ID x 5.0 mm OD) with slip-on tubing stops
| Pump head | Materials | Compatible tubing type | Number of rollers | Flow range (0.1-100 rpm) |
|
DG-A (6 rollers) 0.002-48 mL/min Up to 24 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8 3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
6 |
0.5*0.8: 0.0025-2 mL/min 1*1: 0.008-8 mL/min 2*1: 0.028-28 mL/min 2.4*0.8: 0.032-32 mL/min 3*1: 0.048-48 mL/min |
|
DG-B (10 rollers) 0.0015-32 mL/min Up to 24 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8 3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
10 |
0.5*0.8: 0.002-1.5 mL/min 1*1: 0.006-6 mL/min 2*1: 0.022-22 mL/min 2.4*0.8: 0.024-24 mL/min 3*1: 0.032-32 mL/min |
|
YZ1515X-A / YZII15 0.006-366.7 mL/min 1 channel Up to 4 heads stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
3 |
13# (0.8 mm ID): 0.006-6.3 mL/min 14# (1.6 mm ID): 0.025-25 mL/min 19# (2.4 mm ID): 0.042-41.7 mL/min 16# (3.2 mm ID): 0.077-76.7 mL/min 25# (4.8 mm ID): 0.16-160 mL/min 17# (6.4 mm ID): 0.26-266.7 mL/min 18# (7.9 mm ID): 0.36-366.7 mL/min |
|
YZ1515X-B 0.006-244.3 mL/min 1 channel Up to 4 heads stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
6 |
13# (0.8 mm ID): 0.006-4.2 mL/min 14# (1.6 mm ID): 0.025-16.7 mL/min 19# (2.4 mm ID): 0.042-27.8 mL/min 16# (3.2 mm ID): 0.077-51.1 mL/min 25# (4.8 mm ID): 0.16-106.7 mL/min 17# (6.4 mm ID): 0.26-177.6 mL/min 18# (7.9 mm ID): 0.36-244.3 mL/min |
|
YZ2515X / YZII25 0.16-266.7 mL/min 1 channel Up to 4 heads stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 2.4 mm Tubing sizes: 15#, 24# |
3 |
15# (4.8 mm ID): 0.16-160 mL/min 24# (6.4 mm ID): 0.26-266.7 mL/min |
|
DG15-24 0.09-300 mL/min 2 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers. Tubing sizes: 16#, 25#, 17# |
4 |
16# (3.2 mm ID): 0.09-90 mL/min 25# (4.8 mm ID): 0.24-183.3 mL/min 17# (6.4 mm ID): 0.4-300 mL/min |
|
DG15-28 0.03-46 mL/min 2 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers, addition of slip-on tubing stops required. Tubing sizes: 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8, or microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
8 |
ID ≤ 3.17 mm, wall thickness 0.8-1 mm: ≤75 mL/min 0.5*0.8: 0.03-3.2 mL/min 1*1: 0.13-10 mL/min 2*1: 0.3-46 mL/min 2.4*0.8: 0.5-46 mL/min 13# (0.8 mm ID): 0.07-3.8 mL/min 14# (1.6 mm ID): 0.27-18 mL/min |
|
DG15-48 0.03-46 mL/min 4 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers, addition of slip-on tubing stops required. Tubing sizes: 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8, or microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
8 |
ID ≤ 3.17 mm, wall thickness 0.8-1 mm: ≤75 mL/min 0.5*0.8: 0.03-3.2 mL/min 1*1: 0.13-10 mL/min 2*1: 0.3-46 mL/min 2.4*0.8: 0.5-46 mL/min 13# (0.8 mm ID): 0.07-3.8 mL/min 14# (1.6 mm ID): 0.27-18 mL/min |
1x BT100-1L peristaltic pump drive
1x Pump head
1x Power supply
With the DG pump head, for each channel:
- 1x 1m of 3-stop 1*1 mm tubing
- 1x 1m of 3-stop 2*1 mm tubing
With the YZ1515X or YZII15 pump head:
- 1x 2m of 16# peristaltic tubing
- 1x 2m of 25# peristaltic tubing
With the YZ2515X or YZII25 pump head:
- 1x 2m of 15# peristaltic tubing
- 1x 2m of 24# peristaltic tubing
With the DG15-24 pump head:
- 1x 2m of 16# peristaltic tubing
- 1x 2m of 25# peristaltic tubing
With the DG15-28 pump head:
- 1x 2m of 13# peristaltic tubing
- 1x 2m of 14# peristaltic tubing
- O-rings/Slip-on tubing stops
With the DG15-48 pump head, for each channel:
- 2x 2m of 13# peristaltic tubing
- 2x 2m of 14# peristaltic tubing
- O-rings/Slip-on tubing stops
| Speed (rpm) | 0.1 - 100, CW/CCW |
| Speed resolution (rpm) | 0.1 |
| Control mode | Control panel, external signal control, and communication control are available |
| Display | 182 x 32 graphic LCD for running status |
| Flow rate calibration | Improve flow rate accuracy |
| External control |
Start/stop, direction, and speed control (4-20 mA, 0-5 V, 0-10 V, 0-10 kHz, external control module optional) |
| Communication interface | RS485 |
| Power-off memory | Returns to previous status when powered on |
| Prime | For fast filling and emptying at full speed |
| Dimensions (L x W x H) | 202 x 160 x 239 mm |
| Power supply | AC 110V 50/60Hz or AC 220V 50/60Hz |
| Power consumption | < 50W |
| Operating temperature (°C) | 0 to 40 |
| Relative humidity | < 80 % |
| Drive weight (kg) | 5.3 |
| IP rating | IP31 |
| Pump head compatibility | |||
| Pump head | Number of channels | Max. stacked pump heads on one drive | Tubing compatibility |
| YZ1515X | 1 | 4 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| YZ2515X | 1 | 4 | 15#, 24# |
| YZII15 | 1 | 4 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| YZII25 | 1 | 4 | 15#, 24# |
| DG | Up to 24 | 1 |
3-stop tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
| DG15-24 | 2 | 1 | 16#, 25#, 17# |
| DG15-28 | 2 | 1 |
Standard tubing with slip-on tubing stops ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
| DG15-48 |
4 | 1 |
Standard tubing with slip-on tubing stops ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
|
DMD15-13-B DMD15-13-D |
1 | 2 | 13#, 14#, 19#, 16#, 25# |
Payment Terms
You can either order and pay via credit card or invoice (through a purchase order). Request a quote easily by clicking on the "Request a Quote" button in the cart page.
Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!
Credit card
- Add your products to the cart
- In the cart page, click on Proceed to Checkout
- Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
- That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.
Invoice
- Add your products to the cart
- In the website header, click on Request a Quote
- Fill in the required informations, then click on Submit Quote
- Our team will send you a quote shortly
- After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
- Our team will complete your purchase and send you the invoice!
If you wish to pay in USD, GBP or AUD, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.
Worldwide shipping
We ship worldwide from our warehouse in France.
Shipping charges are calculated based on the shipping country, and can be estimated from the cart page. Our shipping rates and times are:
- France: GLS (1-2 business days), free shipping above 350€
- Germany, Austria, Belgium, Denmark, Spain, Hungary, Italy, Luxembourg, Netherlands, Poland, Portugal, Czechia, Slovakia:
- GLS (2-4 business days), free shipping above 350€
- DHL Express (1-2 business days), reduced rate above 350€
- Bulgaria, Croatia, Estonia, Finland, Ireland, Latvia, Lithuania, Romania, Slovenia, Sweden, Greece, Cyprus, Malta: DHL Express (1-2 business days), free shipping above 400€
- United Kingdom: DHL Express (1-2 business days), free shipping above 400€
- USA, Canada: DHL Express (1-3 business days), free shipping above 400€
- Switzerland: DHL Express (1-2 days), free shipping above 450€
- Other countries: DHL Express, shipping rates based on the destination, weight and dimensions
If you wish to use your own shipping account, we will charge a flat fee of 15€.
We reserve the right to apply a surcharge for parcels > 30 kg, palletized shipments, or packages with dimensions exceeding the maximum dimensions of our carriers.
Please note that our standard shipping incoterms are DAP (Delivered At Place), or EXW if using your own carrier.
Contact us if you have any questions!
