Co-flow droplet generators to generate monodisperse emulsions, with one oil inlet, two water inlets, and one outlet. 6 devices per chip, with 0.5 mm, 1 mm, or 1.2 mm punched holes to accommodate most tubing sizes.
The design is declined in various nozzle and collection channel widths and different channel depths to generate droplets from 20 µm to 70 µm.
General
These co-flow droplet generators in PDMS combine 5 or 6 devices with 3 inlets and 1 outlet in a standard microscope slide format to generate water-in-oil monodisperse emulsions. They are available in various nozzle widths, collection channel widths, and channel heights to generate droplets from 20 µm to 70 µm.
Coated with a silane mix after bonding to guarantee good and consistent hydrophobic properties.
-
Material: PDMS
-
Dimensions: standard glass slide (75 x 25 mm)
-
Number of devices per chip: 5 or 6 (see Specifications tab)
-
Inlets: 3
-
Outlet: 1
-
Punched hole size: 1 mm (some 0.5 and 1.2 mm punch sizes are still available)
The punched hole size enables you to use the following tubing or couplers:
- 0.5 mm: for 1/32" OD rigid tubing (PTFE, PEEK, FEP, PFA, etc.) or 23G couplers for soft-walled tubing
- 1 mm: for 1.06 mm OD rigid tubing (PTFE, PEEK, FEP, PFA, etc.) or 18G couplers for soft-walled tubing
- 1.2 mm: for 1/16" OD rigid tubing (PTFE, PEEK, FEP, PFA, etc.) or 18G couplers for soft-walled tubing
Content
1x Co-flow droplet generator chip in PDMS
Specifications
|
DG-MCN-C1 |
DG-MCN-C2 |
DG-MCN-C3 |
DG-MCN-C4 |
Nozzle width (µm) |
10 |
20 |
30 |
40 |
Collection channel width (µm) |
70 |
40 |
60 |
70 |
Channel height (µm) |
10 |
20 |
30 |
40 |
Target droplet size (µm) |
20-30
|
30-40
|
45-60
|
60-70
|
Material |
PDMS |
PDMS |
PDMS |
PDMS |
Dimensions |
standard glass slide (75 x 25 mm) |
standard glass slide (75 x 25 mm) |
standard glass slide (75 x 25 mm) |
standard glass slide (75 x 25 mm) |
Number of devices per chip |
5 |
6 |
6 |
6 |
Inlets |
3 |
3 |
3 |
3 |
Outlet |
1 |
1 |
1 |
1 |
Punched hole size (mm) |
1 |
1 |
1 |
1 |
For rigid tubing OD |
1.06 mm |
1.06 mm |
1.06 mm |
1.06 mm |
Couplers for soft-walled tubing |
18G |
18G |
18G |
18G |