L100-1F Intelligent Peristaltic Pump
Rated 3.5/5 based on 11 customer reviews

L100-1F Intelligent Peristaltic Pump

This precise peristaltic pump covers a wide range of laboratory applications up to 266.7 mL/min. Program complex multi-step workflows from the intuitive graphic interface, and quickly set up your experiment.
Various pump heads are available from 1 up to 8 channels. Silicone tubing included with each pump channel.
Available immediately
€1,934.00
This precise peristaltic pump covers a wide range of laboratory applications up to 266.7 mL/min. Program complex multi-step workflows from the intuitive graphic interface, and quickly set up your experiment.
Various pump heads are available from 1 up to 8 channels. Silicone tubing included with each pump channel.

The L100-1F is a compact yet powerful precision peristaltic pump for accurate dispensing over a wide range of flow rates. Program multi-step workflows from the convenient touch screen, various configurations of pump heads, and channels available.

  • 7" LCD color touch screen and intuitive display: program your pump directly from the built-in interface
  • Control your pump from the touch screen, footswitch, analog signal, and communication commands, combined with a variety of interfaces (USB, RJ11, DB9, etc.) for easy system connection
  • Multiple control modules designed for a wide variety of applications, including routine and multi-step complex applications:
    • 9 running control modules: constant, ramp up, ramp down, stepped up, stepped down, sine, constant dispensing, ramp up dispensing. ramp down dispensing
    • 8 logic control modules: direction, delay, event trigger, status output, pause, jump, loop, stop

The L100-1F can dispense fluids from 1.5 µL/min to 266.7 mL/min (0-100 rpm CW/CCW), with a speed resolution of 0.1 rpm.

Four different pump heads are available. Each of them allows you to create a specific setup in terms of number of channels, tubing, number of rollers, and flow range. In the Specifications tab, a table lists the tubing requirements and the maximum flow rate possible for each pump head.

Tip: Adding rollers will allow a more accurate and less pulsatile flow, but a lower max. flow rate.

Silicone tubing included with each channel:

  • DG: 3-stop 1*1 mm (1 mm ID x 3 mm OD) and 2*1 mm (2 mm ID x 4 mm OD)
  • YZ1515X or YZII15: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
  • YZ2515X or YZII25: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
  • FG15-13: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
  • FG25-13: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
  • DG15-24: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
  • DG15-28: 13# (0.8 mm ID x 4.0 mm OD and 14# (1.6 mm ID x 5.0 mm OD)

 

Pump head Materials Compatible tubing type Number of rollers Flow range (0.1-100 rpm)

DG-A (6 rollers)

Up to 8 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8

3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

6

0.5*0.8: 0.0025-2 mL/min

1*1: 0.008-8 mL/min

2*1: 0.028-28 mL/min

2.4*0.8: 0.032-32 mL/min

3*1: 0.048-48 mL/min

DG-B (10 rollers)

Up to 4 channels

Not stackable

 

Cartridges: POM

Rollers: Stainless steel

3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8

3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

 

10

0.5*0.8: 0.002-1.5 mL/min

1*1: 0.006-6 mL/min

2*1: 0.022-22 mL/min

2.4*0.8: 0.024-24 mL/min

3*1: 0.032-32 mL/min

YZ1515X-A / YZII15

0.006-366.7 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

3

13# (0.8 mm ID): 0.006-6.3 mL/min

14# (1.6 mm ID): 0.025-25 mL/min

19# (2.4 mm ID): 0.042-41.7 mL/min

16# (3.2 mm ID): 0.077-76.7 mL/min

25# (4.8 mm ID): 0.16-160 mL/min

17# (6.4 mm ID): 0.26-266.7 mL/min

18# (7.9 mm ID): 0.36-366.7 mL/min

YZ1515X-B

0.006-244.3 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

6

13# (0.8 mm ID): 0.006-4.2 mL/min

14# (1.6 mm ID): 0.025-16.7 mL/min

19# (2.4 mm ID): 0.042-27.8 mL/min

16# (3.2 mm ID): 0.077-51.1 mL/min

25# (4.8 mm ID): 0.16-106.7 mL/min

17# (6.4 mm ID): 0.26-177.6 mL/min

18# (7.9 mm ID): 0.36-244.3 mL/min

YZ2515X / YZII25

0.16-266.7 mL/min

1 channel

Not stackable

Housing: PESU

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 2.4 mm

Tubing sizes: 15#, 24#

3

15# (4.8 mm ID): 0.16-160 mL/min

24# (6.4 mm ID): 0.26-266.7 mL/min 

DG15-24

0.09-300 mL/min

2 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 16#, 25#, 17#

4

16# (3.2 mm ID): 0.09-60 mL/min

25# (4.8 mm ID): 0.24-183.3 mL/min

17# (6.4 mm ID): 0.4-300 mL/min

DG15-28

0.03-46 mL/min

2 channels

Not stackable

Cartridges: POM

Rollers: Stainless steel

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8, or microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm

 

8

ID ≤ 3.17 mm, wall thickness 0.8-1 mm: ≤75 mL/min

0.5*0.8: 0.03-3.2 mL/min

1*1: 0.13-10 mL/min

2*1: 0.3-46 mL/min

2.4*0.8: 0.5-46 mL/min

13# (0.8 mm ID): 0.07-3.8 mL/min

14# (1.6 mm ID): 0.27-18 mL/min

FG15-13

1 channel

Not stackable

Housing: IXEF

Rollers: PA6

Standard tubing without stoppers, wall thickness of 1.6 mm

Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18#

3 ≤ 400 mL/min

FG25-13

1 channel

Not stackable

Housing: IXEF

Rollers: PA6

Standard tubing without stoppers, wall thickness of 2.4 mm

Tubing sizes: 15#, 24#

3 ≤ 366.7 mL/min

Display

All the intelligent peristaltic pumps have a 7 inch color display, full touch screen, and with an intuitive graphic interface to provide easy-to-use operations:

  • the 7 inch color display shows different useful information simultaneously
  • the intuitive graphic interface and full touch screen allow you to quickly set up the application process
  • the screen is unaffected by dust and can be used with gloves

Display of the L100-1F intelligent peristaltic pump

Programs

The integrated software allows you to customize parameters by programming, and the parameter programs can be stored and easily recalled:

  • 8 parameter programs of up to 10 steps can be configured and stored
  • program name can be easily defined by letters and numbers
  • the preset external control program is for remote control through external signal

Programs of the L100-1F intelligent peristaltic pump

Control modules

Multiple function modules and intelligent algorithms are designed for a wide variety of applications:

  • 9 running control modules: constant, ramp up, ramp down, stepped up, stepped down, sine, constant dispensing, ramp up dispensing. ramp down dispensing
  • 8 logic control modules: direction, delay, event trigger, status output, pause, jump, loop, stop

Each running control module can be used independently for simple routine applications or to configure multi-steps programs with multiple modules for a more complex application.

L100-1F intelligent peristaltic pump modules

1x L100-1F peristaltic pump drive

1x Pump head

1x Power supply

With the DG pump head, for each channel:

  • 1x 1m of 3-stop 1*1 mm tubing
  • 1x 1m of 3-stop 2*1 mm tubing

With the YZ1515X or YZII15 pump head:

  • 1x 2m of 16# peristaltic tubing
  • 1x 2m of 25# peristaltic tubing

With the YZ2515X or YZII25 pump head:

  • 1x 2m of 15# peristaltic tubing
  • 1x 2m of 24# peristaltic tubing

With the FG15-13 pump head:

  • 1x 2m of 16# peristaltic tubing
  • 1x 2m of 25# peristaltic tubing
  • 1x Mounting plate

With the FG25-13 pump head:

  • 1x 2m of 15# peristaltic tubing
  • 1x 2m of 24# peristaltic tubing
  • 1x Mounting plate

With the DG15-24 pump head:

  • 1x 2m of 16# peristaltic tubing
  • 1x 2m of 25# peristaltic tubing
  • O-rings

With the DG15-28 pump head:

  • 1x 2m of 13# peristaltic tubing
  • 1x 2m of 14# peristaltic tubing
  • O-rings

     

    Technical specifications
    Speed & resolution 0-100 rpm, speed resolution of 0.1 rpm
    Dispensing volume 0.1 mL - 9999 L
    Accuracy 2% with calibration
    Calibration Improve the flow rate and dispensing volume accuracy
    Display 7" 1024*600 Color LCD
    Language English or Chinese, set as needed
    Control mode Touch screen control, footswitch control, external signal control, and communication control
    Work mode Programming
    Programming function
    • Running control mode: constant, ramp up/down, stepped up/down, sine, constant dispersing, rump up/down dispersing
    • Logic control mode: direction, delay, event trigger, status output, pause, jump, loop, stop
    • Configure multi-step program with multiple modules for complex application
    External control Start/stop control, direction control: voltage level signal or switch signal (dry contact)
    Speed control 0-5 V, 0-10 V, 4-20 mA or 0-10 kHz with uniform interface, max speed can be set
    Communication control USB or RS485 (RJ11) interface, Modbus protocol, multiple baud rate (1200/2400/4800/9600/19200/38400 bps)
    Status output Output voltage level signals to indicate pump running status, direction status and other custom status
    Parameter programs 7 parameter programs can be stored and easily recalled
    Delayed start Pump can start running at desired time
    Back suction Antidrip through setting back suction angle and delay time for high dispersing accuracy
    Dispensing volume setting range 0.001 mL - 9999 L
    Dispensing time setting range 0.5 s - 9000 s (0 for continuous transfer without time limit)
    Dispensing cycle setting range 1 - 99999 (0 for unlimited)
    Prime Fast fitting and emptying at full speed
    EMC Comply with EMC Directive 2014/30/EU
    Dimensions (L x W x H) 180 mm x 294 mm x 235 mm
    Power supply AC220V, 50-60Hz
    Operating temperature (°C) 0 to 40
    Relative humidity 10% - 80%
    IP rating IP31
    Drive weight (kg) 5

     

    Pump head compatibility
    Pump head Number of channels Max. stacked pump heads on one drive Tubing compatibility
    YZ1515X 1 1 13#, 14#, 19#, 16#, 25#, 17#, 18#
    YZ2515X 1 1 15#, 24#
    YZII15 1 1 13#, 14#, 19#, 16#, 25#, 17#, 18#
    YZII25 1 1 15#, 24#
    DG Up to 8 1

    3-stop tubing

    ID ≤ 3.17 mm, wall thickness 0.8-1 mm

    DG15-24 2 1 16#, 25#, 17#
    DG15-28 2 1

    3-stop tubing

    ID ≤ 3.17 mm, wall thickness 0.8-1 mm

    FG15-13 1 1 13#, 14#, 19#, 16#, 25#, 17#, 18#
    FG25-13 1 1 15#, 24#

    DMD15-13-B

    DMD15-13-D

    1 1 13#, 14#, 19#, 16#, 25#

    BZ15-13

    BZ25-13

    1 1 14#, 16#, 25#, 17#, 24#

    Intelligent Peristaltic Pump specifications_darwin microfluidics

    Payment Terms

    You can either order and pay via credit card or invoice (through a purchase order). Request a quote easily by clicking on the "Request a Quote" button in the cart page.

    Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!

    Credit card 

    • Add your products to the cart
    • In the cart page, click on Proceed to Checkout
    • Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
    • That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.

    Invoice

    • Add your products to the cart
    • In the website header, click on Request a Quote
    • Fill in the required informations, then click on Submit Quote
    • Our team will send you a quote shortly
    • After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
    • Our team will complete your purchase and send you the invoice!

     

    If you wish to pay in USD, GBP or AUD, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.

     

    Worldwide shipping

    We ship worldwide from our warehouse in France.

    Shipping charges are calculated based on the shipping country, and can be estimated from the cart page. Our shipping rates and times are:

    • France: GLS (1-2 business days), free shipping above 350€
    • Germany, Austria, Belgium, Denmark, Spain, Hungary, Italy, Luxembourg, Netherlands, Poland, Portugal, Czechia, Slovakia:
      • GLS (2-4 business days), free shipping above 350€
      • DHL Express (1-2 business days), reduced rate above 350€
    • Bulgaria, Croatia, Estonia, Finland, Ireland, Latvia, Lithuania, Romania, Slovenia, Sweden, Greece, Cyprus, Malta: DHL Express (1-2 business days), free shipping above 400€
    • United Kingdom: DHL Express (1-2 business days), free shipping above 400€
    • USA, Canada: DHL Express (1-3 business days), free shipping above 400€
    • Switzerland: DHL Express (1-2 days), free shipping above 450€
    • Other countries: DHL Express, shipping rates based on the destination, weight and dimensions

     

    If you wish to use your own shipping account, we will charge a flat fee of 15€.

    We reserve the right to apply a surcharge for parcels > 30 kg, palletized shipments, or packages with dimensions exceeding the maximum dimensions of our carriers.

    Please note that our standard shipping incoterms are DAP (Delivered At Place), or EXW if using your own carrier.

    Contact us if you have any questions!

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)