L100-1S-2 Precision Peristaltic Pump
- Product SKU: LG-L100-1S-2-EU/DG-1-A
- Category: Longer, Peristaltic pumps, Peristaltic Pumps Systems & Drives, Pumps & Flow Controllers
The L100-1S-2 pump series is designed for precise laboratory applications from less than 1 µL/min up to 366.7 mL/min. Dispense your fluids with the highest accuracy: the pump includes a flow rate calibration function, and the pumping speed can be controlled with a precise resolution of 0.01 rpm.
2 meters of silicone tubing are included with each pump channel.
The L100-1S-2 peristaltic pump is designed for precise laboratory applications. With a resolution of 0.01 rpm at low pump speed (10 times more than standard pumps) and flow rate calibration feature, this pump delivers your fluids with the highest precision on a wide range of flow rates.
- Designed for low-flow laboratory applications, from < 1 µL/min up to 366.7 mL/min
- High resolution: 0.01 rpm between 0.01 - 10 rpm ; 0.1 rpm between 10 - 100 rpm
- 2 working modes: pump speed or flow rate
- External control: analog or RS485
- LCD display for flow rate and speed control
- Calibration function
- RS485 external control
Tip: More rollers mean less pulsatility at low flow rates: if you work below 5 mL/min, choose the 10-roller DG pump head to get the best accuracy and repeatability.
Silicone tubing included with each channel:
- DG: 3-stop 1*1 mm (1 mm ID x 3 mm OD) and 2*1 mm (2 mm ID x 4 mm OD)
- YZ1515X or YZII15: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- YZ2515X or YZII25: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
- FG15-13: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- FG25-13: 15# (4.8 mm ID x 9.6 mm OD) and 24# (6.4 mm ID x 11.2 mm OD)
- DG15-24: 16# (3.1 mm ID x 6.3 mm OD) and 25# (4.8 mm ID x 8 mm OD)
- DG15-28: 13# (0.8 mm ID x 4.0 mm OD and 14# (1.6 mm ID x 5.0 mm OD)
| Pump head | Materials | Compatible tubing type | Number of rollers | Flow range (0.01-100 rpm) |
|
DG-A (6 rollers) 0.00025-48 mL/min Up to 8 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8 3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
6 |
0.5*0.8: 0.00025-2 mL/min 1*1: 0.0008-8 mL/min 2*1: 0.0028-28 mL/min 2.4*0.8: 0.0032-32 mL/min 3*1: 0.0048-48 mL/min |
|
DG-B (10 rollers) 0.0002-32 mL/min Up to 4 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
3-stop tubing 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8 3-stop microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
10 |
0.5*0.8: 0.0002-1.5 mL/min 1*1: 0.0006-6 mL/min 2*1: 0.0022-22 mL/min 2.4*0.8: 0.0024-24 mL/min 3*1: 0.0032-32 mL/min |
|
YZ1515X-A / YZII15 0.0006-366.7 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
3 |
13# (0.8 mm ID): 0.0006-6.3 mL/min 14# (1.6 mm ID): 0.0025-25 mL/min 19# (2.4 mm ID): 0.0042-41.7 mL/min 16# (3.2 mm ID): 0.0077-76.7 mL/min 25# (4.8 mm ID): 0.016-160 mL/min 17# (6.4 mm ID): 0.026-266.7 mL/min 18# (7.9 mm ID): 0.036-366.7 mL/min |
|
YZ1515X-B 0.0006-244.3 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
6 |
13# (0.8 mm ID): 0.0006-4.2 mL/min 14# (1.6 mm ID): 0.0025-16.7 mL/min 19# (2.4 mm ID): 0.0042-27.8 mL/min 16# (3.2 mm ID): 0.0077-51.1 mL/min 25# (4.8 mm ID): 0.016-106.7 mL/min 17# (6.4 mm ID): 0.026-177.6 mL/min 18# (7.9 mm ID): 0.036-244.3 mL/min |
|
YZ2515X / YZII25 0.016-266.7 mL/min 1 channel Not stackable |
Housing: PESU Rollers: Stainless steel |
Standard tubing without stoppers, wall thickness of 2.4 mm Tubing sizes: 15#, 24# |
3 |
15# (4.8 mm ID): 0.016-160 mL/min 24# (6.4 mm ID): 0.026-266.7 mL/min |
|
DG15-24 0.009-300 mL/min 2 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers Tubing sizes: 16#, 25#, 17# |
4 |
16# (3.2 mm ID): 0.009-90 mL/min 25# (4.8 mm ID): 0.024-183.3 mL/min 17# (6.4 mm ID): 0.04-300 mL/min |
|
DG15-28 0.003-46 mL/min 2 channels Not stackable |
Cartridges: POM Rollers: Stainless steel |
Standard tubing without stoppers, addition of slip-on tubing stops required Tubing sizes: 13#, 14#, 0.5*0.8, 1*1, 2*1, 2.4*0.8, or microbore tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm
|
8 |
ID ≤ 3.17 mm, wall thickness 0.8-1 mm: ≤75 mL/min 0.5*0.8: 0.003-3.2 mL/min 1*1: 0.013-10 mL/min 2*1: 0.03-46 mL/min 2.4*0.8: 0.05-46 mL/min 13# (0.8 mm ID): 0.007-3.8 mL/min 14# (1.6 mm ID): 0.027-18 mL/min |
|
FG15-13 1 channel Not stackable |
Housing: IXEF Rollers: PA6 |
Standard tubing without stoppers, wall thickness of 1.6 mm Tubing sizes: 13#, 14#, 19#, 16#, 25#, 17#, 18# |
3 | ≤ 400 mL/min |
|
FG25-13 1 channel Not stackable |
Housing: IXEF Rollers: PA6 |
Standard tubing without stoppers, wall thickness of 2.4 mm Tubing sizes: 15#, 24# |
3 | ≤ 366.7 mL/min |
1x L100-1S-2 peristaltic pump drive
1x Pump head
1x Power supply
With the DG pump head, for each channel:
- 1x 1m of 3-stop 1*1 mm tubing
- 1x 1m of 3-stop 2*1 mm tubing
With the YZ1515X or YZII15 pump head:
- 1x 2m of 16# peristaltic tubing
- 1x 2m of 25# peristaltic tubing
With the YZ2515X or YZII25 pump head:
- 1x 2m of 15# peristaltic tubing
- 1x 2m of 24# peristaltic tubing
With the DG15-24 pump head:
- 1x 2m of 16# peristaltic tubing
- 1x 2m of 25# peristaltic tubing
With the DG15-28 pump head:
- 1x 2m of 13# peristaltic tubing
- 1x 2m of 14# peristaltic tubing
- O-rings/Slip-on tubing stops
| Speed (rpm) | 0.01 - 100, CW/CCW |
| Speed resolution |
0.01 rpm between 0.01 and 10 rpm 0.1 rpm between 10 and 100 rpm |
| Display | LCD |
| Control modes | Keypad control, external signal control and communication control |
| Working modes |
|
| Flow rate calibration | Improves the flow rate accuracy |
| Flow rate settings range |
0.01 µL/min to 999 L/min Select the flow rate unit among µL/min, mL/min and L/min. |
| External control |
|
| Communication protocol |
RS485 interface, Longer or Modbus protocol. The communication parameters (address, baud rate, parity, stop bit) can be set through the pump keypad. |
| Timing function |
Set the running time (13 options), the pump stops automatically after the desired operating time. |
| Parameters & settings |
Operating parameters are saved automatically. When powered up, the pump parameters will resume to the parameters before switch off. |
| Prime | Fast filling or emptying at full speed |
| Keypad lock function | Keypad can be locked to prevent misoperation. The time before locking can be changed. |
| Dimensions (L x W x H) | 232 x 142 x 149 mm |
| Power supply | AC 100V-240V (25W), 50/60Hz |
| Operating temperature | 0 - 40 °C |
| Relative humidity | < 80% |
| IP rating | IP31 |
| Weight | 2.38 kg |
| Pump head compatibility | |||
| Pump head | Number of channels | Max. stacked pump heads on one drive | Tubing compatibility |
| YZ1515X | 1 | 1 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| YZ2515X | 1 | 1 | 15#, 24# |
| YZII15 | 1 | 1 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| YZII25 | 1 | 1 | 15#, 24# |
| DG | Up to 8 | 1 |
3-stop tubing ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
| DG15-24 | 2 | 1 | 16#, 25#, 17# |
| DG15-28 | 2 | 1 |
Standard tubing with slip-on tubing stops ID ≤ 3.17 mm, wall thickness 0.8-1 mm |
| FG15-13 | 1 | 1 | 13#, 14#, 19#, 16#, 25#, 17#, 18# |
| FG25-13 | 1 | 1 | 15#, 24# |
|
DMD15-13-B DMD15-13-D |
1 | 1 | 13#, 14#, 19#, 16#, 25# |
|
BZ15-13 BZ25-13 |
1 | 1 | 14#, 16#, 25#, 17#, 24# |
Payment Terms
You can either order and pay via credit card or invoice (through a purchase order). Request a quote easily by clicking on the "Request a Quote" button in the cart page.
Please note that some products are not available for direct purchase: just click "Request a Quote" on the product page and fill in the form to get more informations!
Credit card
- Add your products to the cart
- In the cart page, click on Proceed to Checkout
- Complete your credit card informations (don't worry, we are using Stripe, a PCI-certified program specialized in online transactions)
- That's it! You will receive an order confirmation within a few minutes, and our team will send you the invoice.
Invoice
- Add your products to the cart
- In the website header, click on Request a Quote
- Fill in the required informations, then click on Submit Quote
- Our team will send you a quote shortly
- After receiving the quote, just send your purchase order at contact@darwin-microfluidics.com
- Our team will complete your purchase and send you the invoice!
If you wish to pay in USD, GBP or AUD, please specify it in your PO. We can add the converted value in the required currency to the quote if requested.
Worldwide shipping
We ship worldwide from our warehouse in France.
Shipping charges are calculated based on the shipping country, and can be estimated from the cart page. Our shipping rates and times are:
- France: GLS (1-2 business days), free shipping above 350€
- Germany, Austria, Belgium, Denmark, Spain, Hungary, Italy, Luxembourg, Netherlands, Poland, Portugal, Czechia, Slovakia:
- GLS (2-4 business days), free shipping above 350€
- DHL Express (1-2 business days), reduced rate above 350€
- Bulgaria, Croatia, Estonia, Finland, Ireland, Latvia, Lithuania, Romania, Slovenia, Sweden, Greece, Cyprus, Malta: DHL Express (1-2 business days), free shipping above 400€
- United Kingdom: DHL Express (1-2 business days), free shipping above 400€
- USA, Canada: DHL Express (1-3 business days), free shipping above 400€
- Switzerland: DHL Express (1-2 days), free shipping above 450€
- Other countries: DHL Express, shipping rates based on the destination, weight and dimensions
If you wish to use your own shipping account, we will charge a flat fee of 15€.
We reserve the right to apply a surcharge for parcels > 30 kg, palletized shipments, or packages with dimensions exceeding the maximum dimensions of our carriers.
Please note that our standard shipping incoterms are DAP (Delivered At Place), or EXW if using your own carrier.
Contact us if you have any questions!
