NE-300 InfusionONE Syringe Pump
The New Era NE-300 InfusionOne is a basic, easy-to-use one channel infusing syringe pump. It is the most cost-effective solution to begin working with microfluidics.
Flow range from 12.2 nL/min up to 20.95 mL/min, +/- 1% accuracy.
General
No withdrawal, volume target, computer interface or programmability, infuse only.
3 easy steps:
- Set the syringe diameter
- Set the infusion rate
- Start the pump
This syringe pump can hold 1 syringe up to 60 mL (or 140 mL filled up to 120 mL).
Wide flow range, depending on the syringe used: from 12.2 nL/min (1 mL syringe) to 20.95 mL/min (60 mL syringe), higher flow rates can be achieved with a 140 mL syringe. See a complete table of flow rates in the user guide.
Flow accuracy is +/- 1%.
Maximum force: 15.8 kg (35 lbs) at minimum speed, 8.2 kg (18 lbs) at maximum speed.
| Syringe size | Min. flow rate | Max. flow rate |
| 0.5 µL | 16.7 pL/min | 314.3 nL/min |
| 1 mL | 12.2 nL/min | 654.5 µL/min |
| 3 mL | 40.6 nL/min | 2.18 mL/min |
| 5 mL | 79.1 nL/min | 4.26 mL/min |
| 10 mL | 114.6 nL/min | 6.17 mL/min |
| 20 mL | 199.8 nL/min | 10.75 mL/min |
| 30 mL | 256.7 nL/min | 13.81 mL/min |
| 60 mL | 389.2 nL/min | 20.95 mL/min |
Content
1x NE-300 (InfusionONE) syringe pump
1x Local power supply (12 VDC / 1 A)
Specifications
| Syringe compatibility |
Holds 1 syringe from µL up to 60 mL (140 mL partially filled) Syringe inner diameter range: 0.100 to 50.00 mm |
| Flow range | 0.73 µL/h (1 mL syringe) to 1257 mL/h (60 mL syringe) |
| Speed range | 0.004205 cm/h to 3.7742 cm/min |
| Max. force |
15.8 kg (35 lbs) at minimum speed 8.2 kg (18 lbs) at maximum speed |
| Accuracy | +/- 1% |
| Reproducibility | +/- 0.1% |
| Pump modes |
Syringe purge mode Power failure mode: the pump resumes pumping after reset Infusion rate can be changed while pumping ⚠️The pump runs continuously until you stop it. Does not withdraw, no volume target, no computer interface or programmability. |
| Selectable units |
mL/h, µL/h, mL/min, µL/min |
| Dimensions | 22.9 x 14.6 x 11.4 cm |
| Power supply | 12 VDC |
| Weight | 1.63 kg (3.6 lbs) |
| Warranty | 2 years |
Documentation
The New Era NE-300 InfusionOne is a basic, easy-to-use one channel infusing syringe pump. It is the most cost-effective solution to begin working with microfluidics.
Flow range from 12.2 nL/min up to 20.95 mL/min, +/- 1% accuracy.
General
No withdrawal, volume target, computer interface or programmability, infuse only.
3 easy steps:
- Set the syringe diameter
- Set the infusion rate
- Start the pump
This syringe pump can hold 1 syringe up to 60 mL (or 140 mL filled up to 120 mL).
Wide flow range, depending on the syringe used: from 12.2 nL/min (1 mL syringe) to 20.95 mL/min (60 mL syringe), higher flow rates can be achieved with a 140 mL syringe. See a complete table of flow rates in the user guide.
Flow accuracy is +/- 1%.
Maximum force: 15.8 kg (35 lbs) at minimum speed, 8.2 kg (18 lbs) at maximum speed.
| Syringe size | Min. flow rate | Max. flow rate |
| 0.5 µL | 16.7 pL/min | 314.3 nL/min |
| 1 mL | 12.2 nL/min | 654.5 µL/min |
| 3 mL | 40.6 nL/min | 2.18 mL/min |
| 5 mL | 79.1 nL/min | 4.26 mL/min |
| 10 mL | 114.6 nL/min | 6.17 mL/min |
| 20 mL | 199.8 nL/min | 10.75 mL/min |
| 30 mL | 256.7 nL/min | 13.81 mL/min |
| 60 mL | 389.2 nL/min | 20.95 mL/min |
Content
1x NE-300 (InfusionONE) syringe pump
1x Local power supply (12 VDC / 1 A)
Specifications
| Syringe compatibility |
Holds 1 syringe from µL up to 60 mL (140 mL partially filled) Syringe inner diameter range: 0.100 to 50.00 mm |
| Flow range | 0.73 µL/h (1 mL syringe) to 1257 mL/h (60 mL syringe) |
| Speed range | 0.004205 cm/h to 3.7742 cm/min |
| Max. force |
15.8 kg (35 lbs) at minimum speed 8.2 kg (18 lbs) at maximum speed |
| Accuracy | +/- 1% |
| Reproducibility | +/- 0.1% |
| Pump modes |
Syringe purge mode Power failure mode: the pump resumes pumping after reset Infusion rate can be changed while pumping ⚠️The pump runs continuously until you stop it. Does not withdraw, no volume target, no computer interface or programmability. |
| Selectable units |
mL/h, µL/h, mL/min, µL/min |
| Dimensions | 22.9 x 14.6 x 11.4 cm |
| Power supply | 12 VDC |
| Weight | 1.63 kg (3.6 lbs) |
| Warranty | 2 years |